Author Topic: Post Your Cruiser (Read 436512 times)

Narcissus · « **Reply #990 on:** April 04, 2014, 08:20:12 PM »

Welcome, stock 139s, 58mm 80Ds, risers, dramatic grip tape. I think that the 80Ds make it harder to ollie. They're just a tiny bit too soft. But for hauling, they're amazing. This shape kickflips like a dream and is fuckin' perfect for no-complys.

Exposure · « **Reply #991 on:** April 04, 2014, 09:17:38 PM »

Quote from: felix. on March 24, 2014, 03:59:20 PM

put 51 f4 spits on and it's my main whip for street right now.

8.75 is a bitch to flip.

That's a fucking beautiful set up

oyolar · « **Reply #992 on:** April 05, 2014, 07:22:41 PM »

Quote from: felix. on March 24, 2014, 03:59:20 PM

put 51 f4 spits on and it's my main whip for street right now.

8.75 is a bitch to flip.

If you're flipping your cruiser, you're skating your cruiser wrong.

JB · « **Reply #993 on:** April 05, 2014, 09:25:52 PM »

Quote from: Narcissus on April 04, 2014, 08:20:12 PM

Welcome, stock 139s, 58mm 80Ds, risers, dramatic grip tape. I think that the 80Ds make it harder to ollie. They're just a tiny bit too soft. But for hauling, they're amazing. This shape kickflips like a dream and is fuckin' perfect for no-complys.

That board is so sick! One of the best I've seen from welcome.

I totally agree about the 80d wheels. I can't skate mine for shit, but they're smooth as fuck.

gaunting · « **Reply #994 on:** April 05, 2014, 10:06:44 PM »

Quote from: JB on April 05, 2014, 09:25:52 PM

Quote from: Narcissus on April 04, 2014, 08:20:12 PM
Expand Quote

Welcome, stock 139s, 58mm 80Ds, risers, dramatic grip tape. I think that the 80Ds make it harder to ollie. They're just a tiny bit too soft. But for hauling, they're amazing. This shape kickflips like a dream and is fuckin' perfect for no-complys.
[close]

That board is so sick! One of the best I've seen from welcome.

I totally agree about the 80d wheels. I can't skate mine for shit, but they're smooth as fuck.

What size is that welcome? I've never seen that one.

gaunting · « **Reply #995 on:** April 05, 2014, 10:07:37 PM »

Quote from: Nallid on March 23, 2014, 10:58:06 PM

Put some serrated rails on this the other day to complete.
Creature 7.9 that has opened beers.
old 139 stage 10s
spitfire 80hds that never get dirty.
1/4" dooks.
super reds.

That is the perfect cruiser.

Julz · « **Reply #996 on:** April 06, 2014, 01:02:19 AM »

Real 8.25
Indy's 149 stage 10
OJ keyframes 54's

TwisT · « **Reply #997 on:** April 07, 2014, 03:04:39 PM »

element came thru and cut boards into cruisers. if you bought an element deck, you got a element truck/wheels/etc for free

Paco Supreme · « **Reply #998 on:** April 07, 2014, 03:07:09 PM »

Quote from: TFUCKINA on April 05, 2014, 10:06:44 PM

Quote from: JB on April 05, 2014, 09:25:52 PM
Expand Quote
Quote from: Narcissus on April 04, 2014, 08:20:12 PM
Expand Quote

Welcome, stock 139s, 58mm 80Ds, risers, dramatic grip tape. I think that the 80Ds make it harder to ollie. They're just a tiny bit too soft. But for hauling, they're amazing. This shape kickflips like a dream and is fuckin' perfect for no-complys.
[close]

That board is so sick! One of the best I've seen from welcome.

I totally agree about the 80d wheels. I can't skate mine for shit, but they're smooth as fuck.
[close]

What size is that welcome? I've never seen that one.

Its an 8.5. they havent made that shape for a little while, hopefully they bring it back, i forgot how good it looks

chickeneverymeal · « **Reply #999 on:** April 09, 2014, 12:06:59 AM »

8" Vu "Greetings from Baltimore"
Indy 129 Stage 7
Indy Allen Hardware
Indy 7 bearings
OJ 60mm
Jessup

Probably A Robot · « **Reply #1000 on:** April 09, 2014, 05:10:29 PM »

Scumco Cap'n Cruiser 8 7/8
Indy 159s
OJs 60mm, 78a
Reds
1/4'' risers I found lying around

Quote from: oyolar on April 05, 2014, 07:22:41 PM

If you're flipping your cruiser, you're skating your cruiser wrong.

If you have rules regarding your use of cruisers, you are doing skateboarding wrong.

Rusty Shackleford · « **Reply #1001 on:** April 10, 2014, 05:45:13 PM »

spring is here!!!!
Jessee Neptune 10.2x31.1
indy 159's
bones medium bushings
oj street razors
bones reds
pig rails

heritage · « **Reply #1002 on:** July 02, 2014, 09:06:43 AM »

It's Summer so it's time to set up a new Beer Cruiser...

Girl Rick Howard Powerslide

tom · « **Reply #1003 on:** July 07, 2014, 01:21:22 PM »

I'm not sure if cruiser is the right term for this
Rear End Rudy reissue with the original shape
44mm wheels
Now I have to find the right trucks for this and I can curb dance from noseslide to crook

Rusty_Berrings · « **Reply #1004 on:** July 07, 2014, 01:23:59 PM »

oh shit i got those wheels. looks like you got a sick ass setup there!

Cold Pizza · « **Reply #1005 on:** July 07, 2014, 09:01:24 PM »

Quote from: tom on July 07, 2014, 01:21:22 PM

I'm not sure if cruiser is the right term for this
Rear End Rudy reissue with the original shape
44mm wheels
Now I have to find the right trucks for this and I can curb dance from noseslide to crook

http://www.ebay.com/itm/Vintage-independent-skateboard-trucks-with-wheels-plan-b-premium-52mm-/321450601865?pt=LH_DefaultDomain_0&hash=item4ad7f2ed89

El Chupacabra · « **Reply #1006 on:** July 08, 2014, 08:45:27 AM »

So I've been having fun with weird shapes lately. Gonna set this bad boy up today.

Custom Brujaria Rocket cruiser 9"
Old Indy 149s (want 159s, but can't afford them)
OJs
Swiss
Dimebag Hardware

pekkaaa · « **Reply #1007 on:** July 09, 2014, 03:59:20 AM »

9" Girl
Indy 149 /w indy risers
OJ 56mm keyframes
Reds

The Nose Face · « **Reply #1008 on:** July 09, 2014, 09:04:27 AM »

Quote from: El Chupacabra on July 08, 2014, 08:45:27 AM

So I've been having fun with weird shapes lately. Gonna set this bad boy up today.

Custom Brujaria Rocket cruiser 9"
Old Indy 149s (want 159s, but can't afford them)
OJs
Swiss
Dimebag Hardware

I'm with that - wanna try this one next

El Chupacabra · « **Reply #1009 on:** July 09, 2014, 05:43:04 PM »

[/quote]

I'm with that - wanna try this one next

[/quote]

I ran a coffin board. Only did two and sold them out!
Looked like this:

tom · « **Reply #1010 on:** July 18, 2014, 08:59:57 PM »

here's another one from the roster
neal hendrix new deal deck from 1991. the double kick was around for a couple years at the time, so the shape wasn't anything groundbreaking. i saw one of these go for $600 last year, but i like to skate mine. it even has those terrible turning gullwing street shadows. the ones with the plastic baseplate and axles that slip by pushing on them

Xen · « **Reply #1011 on:** July 19, 2014, 12:24:21 PM »

Middle board is used as my cruiser.

8.75" AH (WB is too small, you can tell just by comparing it to the 8.5" decks next to it)
ACE 66s
Indy 1/8" shock pads
60mm BONES ATFs
Zealous bearings
MOB
Bolts

pandarelated · « **Reply #1012 on:** July 19, 2014, 01:57:41 PM »

Quote from: Xen on July 19, 2014, 12:24:21 PM

Middle board is used as my cruiser.

8.75" AH (WB is too small, you can tell just by comparing it to the 8.5" decks next to it)
ACE 66s
Indy 1/8" shock pads
60mm BONES ATFs
Zealous bearings
MOB
Bolts

what is the SMA board? and where did you get it?

Xen · « **Reply #1013 on:** July 20, 2014, 10:55:46 AM »

Quote from: pandarelated on July 19, 2014, 01:57:41 PM

what is the SMA board? and where did you get it?

It's and SMA 'Eight five' (can't really see it but that's written just under the back truck), setup with ACE 55s w/magnesium baseplates/Bones Meds/MOB/56.5mm Pi wheels/Black Panther 7s.

They're made in SoCal, I live in Santa Monica and the local shop near me carry them/tons of people around here use them (I love blocks away from a bowl/crete park where the team skates).

Tail is a bit tapered/narrow for my liking but I've moved up to 8.5" for street and swapped my Cardiel from bowl to street and needed a bowl board again (the SMA).

SMA on the Left: (tail is a bit pointy but other than that, it's very nice, plys are thin/board is light), AH Cardiel on the right.

pandarelated · « **Reply #1014 on:** July 20, 2014, 12:18:19 PM »

Quote from: Xen on July 20, 2014, 10:55:46 AM

Quote from: pandarelated on July 19, 2014, 01:57:41 PM
Expand Quote

what is the SMA board? and where did you get it?
[close]

It's and SMA 'Eight five' (can't really see it but that's written just under the back truck), setup with ACE 55s w/magnesium baseplates/Bones Meds/MOB/56.5mm Pi wheels/Black Panther 7s.

They're made in SoCal, I live in Santa Monica and the local shop near me carry them/tons of people around here use them (I love blocks away from a bowl/crete park where the team skates).

Tail is a bit tapered/narrow for my liking but I've moved up to 8.5" for street and swapped my Cardiel from bowl to street and needed a bowl board again (the SMA).

SMA on the Left: (tail is a bit pointy but other than that, it's very nice, plys are thin/board is light), AH Cardiel on the right.

looked it up. sick Skip is making boards. in his own shop again in SM.. but it looks like they are ONLY available in SM.
i emailed seeing about getting one. . im just gonna assume these are high quality.

http://smaskateboards.com/

Xen · « **Reply #1015 on:** July 20, 2014, 01:02:18 PM »

When I found out about them I knew Id' ride'em. Hard to beat a local company in your city, especially when it's SMA. They're high quality for sure, tho they do carry a premium at the shops: $60 as they are all hand-made/stained and no two are a like.

If you are interested in getting one and they don't respond let me know and we can work something out. The shops usually have limited stock as they sell out VERY fast.

063 FLIP · « **Reply #1016 on:** July 23, 2014, 04:13:04 PM »

I've been thinking about getting a shaped board/cruiser for awhile now, finally shelled out the cash and got one today. Definitely worth it

Surprise mh1 deck (8.87)
3d cloud cruiser wheels (58mm)
bones reds
Independent stage 11 (149s)

JB · « **Reply #1017 on:** July 24, 2014, 11:43:40 AM »

Quote from: 063 FLIP on July 23, 2014, 04:13:04 PM

I've been thinking about getting a shaped board/cruiser for awhile now, finally shelled out the cash and got one today. Definitely worth it

Surprise mh1 deck (8.87)
3d cloud cruiser wheels (58mm)
bones reds
Independent stage 11 (149s)

looks so good! what do you think of those wheels?

063 FLIP · « **Reply #1018 on:** July 24, 2014, 01:45:49 PM »

Thanks man. I'm not an expert on cruiser wheels or anything but I'd say they are good- super smooth and quiet.

Xen · « **Reply #1019 on:** July 30, 2014, 02:21:58 PM »

Just setup my new cruiser

9.5"x33.25"x15"WB Emergency Lucero OG Bars
11"x44" Cloud Ride! EZ Grip Perforated Course Griptape
60mm 95a OJ II Slimeball Elite Combos Wheels
Lucky Silver Shock Risers 1/8" (Indy shocks shown, I swapped them out)
ACE 66s
Bones Softs
Zealous Bearings
Indy 1" Allen bolts

Author Topic: Post Your Cruiser (Read 436512 times)

Rusty_Berrings

Cold Pizza

Cookie Preferences