DLX Shapes

[Mbrimson88]

I recently stood on the 8.75" Classic eagle. I normally ride the 8.25/14.38 shape, but I really liked the 8.75 Eagle, despite the fact that it was a boat. Then I realized why; it's basically the exact same shape as the 8.25, but just bigger. To that end, I'd love to see DLX produce that shape (e.g. the 8.25) in other width/wheelbases, too. 

Also, I have Blue Meanie coming this week. Way bigger than I normally ride, but it seemed like something fun to try.

Did you set up the Blue Meanie yet?

If so how did it feel?

[Sedition]

Expand Quote

I recently stood on the 8.75" Classic eagle. I normally ride the 8.25/14.38 shape, but I really liked the 8.75 Eagle, despite the fact that it was a boat. Then I realized why; it's basically the exact same shape as the 8.25, but just bigger. To that end, I'd love to see DLX produce that shape (e.g. the 8.25) in other width/wheelbases, too. 

Also, I have Blue Meanie coming this week. Way bigger than I normally ride, but it seemed like something fun to try.

[close]

Did you set up the Blue Meanie yet?

If so how did it feel?

I rode it for about two days and then gave it to a friend. It was fun, but I liked my popsicle a lot more.

Unrelated: I was in a Vans store last week. Was peaking the decks while getting shoes. They had an “8.28” Mason eyes deck. It had the 8.28 sticker on it. However, it was CLEARLY the 8.25/14.38 shape.

[WideFeet]

Anyone know what’s up with the Full Shapes? I know they’re making the Full- SE shapes, but I haven’t seen any “Full” shapes.

I’m guessing it has to do with the wheelbases? Drilling multiple decks at a time with the same wheelbases, but shaping them differently must save money. Hopefully since production is starting to get back to normal, we’ll see more soon.

[Woodshop]

Anyone know what’s up with the Full Shapes? I know they’re making the Full- SE shapes, but I haven’t seen any “Full” shapes.

I’m guessing it has to do with the wheelbases? Drilling multiple decks at a time with the same wheelbases, but shaping them differently must save money. Hopefully since production is starting to get back to normal, we’ll see more soon.

The trend is going more towards shorter wheelbased decks, so I would say the original FULL shapes might be few and far between now.

There might have been one or two in the last couple of catalog listings, maybe an 8.25 Full and I seem to recall an 8 or something small, but apart from that, not really anything.

I found the bigger FULL boards really good, wide long kicks, longer wheelbases, very big boards overall, but as said, the trend is going more towards shorter wheelbases so they introduced the Full SE (Short edition) and they are more popular.

At least the 8.38 and 8.5 SE which are still fairly common have 14.38 wb and are 32.25 long.


https://www.realskateboards.com/construction/



What size were you after?

[WideFeet]

Expand Quote

Anyone know what’s up with the Full Shapes? I know they’re making the Full- SE shapes, but I haven’t seen any “Full” shapes.

I’m guessing it has to do with the wheelbases? Drilling multiple decks at a time with the same wheelbases, but shaping them differently must save money. Hopefully since production is starting to get back to normal, we’ll see more soon.

[close]

The trend is going more towards shorter wheelbased decks, so I would say the original FULL shapes might be few and far between now.

There might have been one or two in the last couple of catalog listings, maybe an 8.25 Full and I seem to recall an 8 or something small, but apart from that, not really anything.

I found the bigger FULL boards really good, wide long kicks, longer wheelbases, very big boards overall, but as said, the trend is going more towards shorter wheelbases so they introduced the Full SE (Short edition) and they are more popular.

At least the 8.38 and 8.5 SE which are still fairly common have 14.38 wb and are 32.25 long.


https://www.realskateboards.com/construction/



What size were you after?

Yeah, I’ve noticed that trend. Really hope they bring them back.

I want an 8.38 Full. I might have to settle soon and grab a 8.38 or 8.5 Full SE and give it a shot

[Roisto]

Expand Quote

Expand Quote

Anyone know what’s up with the Full Shapes? I know they’re making the Full- SE shapes, but I haven’t seen any “Full” shapes.

I’m guessing it has to do with the wheelbases? Drilling multiple decks at a time with the same wheelbases, but shaping them differently must save money. Hopefully since production is starting to get back to normal, we’ll see more soon.

[close]

The trend is going more towards shorter wheelbased decks, so I would say the original FULL shapes might be few and far between now.

There might have been one or two in the last couple of catalog listings, maybe an 8.25 Full and I seem to recall an 8 or something small, but apart from that, not really anything.

I found the bigger FULL boards really good, wide long kicks, longer wheelbases, very big boards overall, but as said, the trend is going more towards shorter wheelbases so they introduced the Full SE (Short edition) and they are more popular.

At least the 8.38 and 8.5 SE which are still fairly common have 14.38 wb and are 32.25 long.


https://www.realskateboards.com/construction/



What size were you after?

[close]

Yeah, I’ve noticed that trend. Really hope they bring them back.

I want an 8.38 Full. I might have to settle soon and grab a 8.38 or 8.5 Full SE and give it a shot

The 8.38” Full is so nice. It does feel long but I got along really well with the one I had. Still have one new in my stack of decks. I’ve come to the conclusion that shorter boards really aren’t for me even though they are more manageable in many ways. I like the stability of a longer deck. My current Polar P2 feels too sketchy and it’s not abnormally short just a tad short for my taste.

[Xen]

The full 8.18 and Full 8.25SE were my faves.

The Full 8.25SE lowpro II, now that was something special.

[Boog]

Expand Quote

Expand Quote

Anyone know what’s up with the Full Shapes? I know they’re making the Full- SE shapes, but I haven’t seen any “Full” shapes.

I’m guessing it has to do with the wheelbases? Drilling multiple decks at a time with the same wheelbases, but shaping them differently must save money. Hopefully since production is starting to get back to normal, we’ll see more soon.

[close]

The trend is going more towards shorter wheelbased decks, so I would say the original FULL shapes might be few and far between now.

There might have been one or two in the last couple of catalog listings, maybe an 8.25 Full and I seem to recall an 8 or something small, but apart from that, not really anything.

I found the bigger FULL boards really good, wide long kicks, longer wheelbases, very big boards overall, but as said, the trend is going more towards shorter wheelbases so they introduced the Full SE (Short edition) and they are more popular.

At least the 8.38 and 8.5 SE which are still fairly common have 14.38 wb and are 32.25 long.


https://www.realskateboards.com/construction/



What size were you after?

[close]

Yeah, I’ve noticed that trend. Really hope they bring them back.

I want an 8.38 Full. I might have to settle soon and grab a 8.38 or 8.5 Full SE and give it a shot

I have an 8.25 full se real and it measures as 8 3 all the way thru. I thought it looked bigger than the other 8.25 boards I have so I measured it and low and behold it was 8.3. Everything else was spot on tho. 32 length and 14.25 wb.

[Xen]

Expand Quote

Expand Quote

Expand Quote

Anyone know what’s up with the Full Shapes? I know they’re making the Full- SE shapes, but I haven’t seen any “Full” shapes.

I’m guessing it has to do with the wheelbases? Drilling multiple decks at a time with the same wheelbases, but shaping them differently must save money. Hopefully since production is starting to get back to normal, we’ll see more soon.

[close]

The trend is going more towards shorter wheelbased decks, so I would say the original FULL shapes might be few and far between now.

There might have been one or two in the last couple of catalog listings, maybe an 8.25 Full and I seem to recall an 8 or something small, but apart from that, not really anything.

I found the bigger FULL boards really good, wide long kicks, longer wheelbases, very big boards overall, but as said, the trend is going more towards shorter wheelbases so they introduced the Full SE (Short edition) and they are more popular.

At least the 8.38 and 8.5 SE which are still fairly common have 14.38 wb and are 32.25 long.


https://www.realskateboards.com/construction/



What size were you after?

[close]

Yeah, I’ve noticed that trend. Really hope they bring them back.

I want an 8.38 Full. I might have to settle soon and grab a 8.38 or 8.5 Full SE and give it a shot

[close]

I have an 8.25 full se real and it measures as 8 3 all the way thru. I thought it looked bigger than the other 8.25 boards I have so I measured it and low and behold it was 8.3. Everything else was spot on tho. 32 length and 14.25 wb.

3 of the 5 - 8.25SE FULLs I rode were actually 8.3 (which is why I loved that shape so).

I'd ride the 8.18 full if they still made it.

[WideFeet]

Expand Quote

Expand Quote

Expand Quote

Anyone know what’s up with the Full Shapes? I know they’re making the Full- SE shapes, but I haven’t seen any “Full” shapes.

I’m guessing it has to do with the wheelbases? Drilling multiple decks at a time with the same wheelbases, but shaping them differently must save money. Hopefully since production is starting to get back to normal, we’ll see more soon.

[close]

The trend is going more towards shorter wheelbased decks, so I would say the original FULL shapes might be few and far between now.

There might have been one or two in the last couple of catalog listings, maybe an 8.25 Full and I seem to recall an 8 or something small, but apart from that, not really anything.

I found the bigger FULL boards really good, wide long kicks, longer wheelbases, very big boards overall, but as said, the trend is going more towards shorter wheelbases so they introduced the Full SE (Short edition) and they are more popular.

At least the 8.38 and 8.5 SE which are still fairly common have 14.38 wb and are 32.25 long.


https://www.realskateboards.com/construction/



What size were you after?

[close]

Yeah, I’ve noticed that trend. Really hope they bring them back.

I want an 8.38 Full. I might have to settle soon and grab a 8.38 or 8.5 Full SE and give it a shot

[close]

The 8.38” Full is so nice. It does feel long but I got along really well with the one I had. Still have one new in my stack of decks. I’ve come to the conclusion that shorter boards really aren’t for me even though they are more manageable in many ways. I like the stability of a longer deck. My current Polar P2 feels too sketchy and it’s not abnormally short just a tad short for my taste.

I like the longer wheelbases myself. 14.5 is the sweet spot. More stability. For some reason, 360 flips work way better with a long wheelbase. I just skated a 14.25 wheelbase and everything works perfect, except 360 flips. That trick is such a struggle for me with a shorter wheelbase

[Woodshop]

Expand Quote

Expand Quote

Expand Quote

Expand Quote

Anyone know what’s up with the Full Shapes? I know they’re making the Full- SE shapes, but I haven’t seen any “Full” shapes.

I’m guessing it has to do with the wheelbases? Drilling multiple decks at a time with the same wheelbases, but shaping them differently must save money. Hopefully since production is starting to get back to normal, we’ll see more soon.

[close]

The trend is going more towards shorter wheelbased decks, so I would say the original FULL shapes might be few and far between now.

There might have been one or two in the last couple of catalog listings, maybe an 8.25 Full and I seem to recall an 8 or something small, but apart from that, not really anything.

I found the bigger FULL boards really good, wide long kicks, longer wheelbases, very big boards overall, but as said, the trend is going more towards shorter wheelbases so they introduced the Full SE (Short edition) and they are more popular.

At least the 8.38 and 8.5 SE which are still fairly common have 14.38 wb and are 32.25 long.


https://www.realskateboards.com/construction/



What size were you after?

[close]

Yeah, I’ve noticed that trend. Really hope they bring them back.

I want an 8.38 Full. I might have to settle soon and grab a 8.38 or 8.5 Full SE and give it a shot

[close]

The 8.38” Full is so nice. It does feel long but I got along really well with the one I had. Still have one new in my stack of decks. I’ve come to the conclusion that shorter boards really aren’t for me even though they are more manageable in many ways. I like the stability of a longer deck. My current Polar P2 feels too sketchy and it’s not abnormally short just a tad short for my taste.

[close]

I like the longer wheelbases myself. 14.5 is the sweet spot. More stability. For some reason, 360 flips work way better with a long wheelbase. I just skated a 14.25 wheelbase and everything works perfect, except 360 flips. That trick is such a struggle for me with a shorter wheelbase

That is why the normal 8.38 boards with 14.5 wb and 32.25 length are my go to, as I can deal with the shape easily enough and still have a good wheelbase.

The older 8.38 FULL which I still have a box of and another box of 8.5 FULL all have 14.6 + wheelbases, so they are definitely longer again.

If you were in AU I would be happy to share.

[Sedition]

Expand Quote

Expand Quote

Expand Quote

Expand Quote

Expand Quote

Anyone know what’s up with the Full Shapes? I know they’re making the Full- SE shapes, but I haven’t seen any “Full” shapes.

I’m guessing it has to do with the wheelbases? Drilling multiple decks at a time with the same wheelbases, but shaping them differently must save money. Hopefully since production is starting to get back to normal, we’ll see more soon.

[close]

The trend is going more towards shorter wheelbased decks, so I would say the original FULL shapes might be few and far between now.

There might have been one or two in the last couple of catalog listings, maybe an 8.25 Full and I seem to recall an 8 or something small, but apart from that, not really anything.

I found the bigger FULL boards really good, wide long kicks, longer wheelbases, very big boards overall, but as said, the trend is going more towards shorter wheelbases so they introduced the Full SE (Short edition) and they are more popular.

At least the 8.38 and 8.5 SE which are still fairly common have 14.38 wb and are 32.25 long.


https://www.realskateboards.com/construction/



What size were you after?

[close]

Yeah, I’ve noticed that trend. Really hope they bring them back.

I want an 8.38 Full. I might have to settle soon and grab a 8.38 or 8.5 Full SE and give it a shot

[close]

The 8.38” Full is so nice. It does feel long but I got along really well with the one I had. Still have one new in my stack of decks. I’ve come to the conclusion that shorter boards really aren’t for me even though they are more manageable in many ways. I like the stability of a longer deck. My current Polar P2 feels too sketchy and it’s not abnormally short just a tad short for my taste.

[close]

I like the longer wheelbases myself. 14.5 is the sweet spot. More stability. For some reason, 360 flips work way better with a long wheelbase. I just skated a 14.25 wheelbase and everything works perfect, except 360 flips. That trick is such a struggle for me with a shorter wheelbase

[close]

That is why the normal 8.38 boards with 14.5 wb and 32.25 length are my go to, as I can deal with the shape easily enough and still have a good wheelbase.

The older 8.38 FULL which I still have a box of and another box of 8.5 FULL all have 14.6 + wheelbases, so they are definitely longer again.

If you were in AU I would be happy to share.

I was a fan of the 8.5 Full for bigger transition. I've since switched over to the 8.75 shape (same 14.6 WB that the 8.5 full had), but I am running 159s on that...and I kind of like 149s more (8.25 with 144s is my street board).

[Woodshop]

I was a fan of the 8.5 Full for bigger transition. I've since switched over to the 8.75 shape (same 14.6 WB that the 8.5 full had), but I am running 159s on that...and I kind of like 149s more (8.25 with 144s is my street board).

Those 8.75s are such a solid board - I have a few second hand white eagles from people, which are a little more nimble than the 9" orange eagles but way more stable than the other smaller boards like the ones I usually ride in 8.38 or 8.5 with 149s too.

Did you mean you have tried 149s on it, or you would like to try them on it?

[Sedition]

Expand Quote

I was a fan of the 8.5 Full for bigger transition. I've since switched over to the 8.75 shape (same 14.6 WB that the 8.5 full had), but I am running 159s on that...and I kind of like 149s more (8.25 with 144s is my street board).

[close]

Those 8.75s are such a solid board - I have a few second hand white eagles from people, which are a little more nimble than the 9" orange eagles but way more stable than the other smaller boards like the ones I usually ride in 8.38 or 8.5 with 149s too.

Did you mean you have tried 149s on it, or you would like to try them on it?

It's been awhile since I rode an 8.5 full. That said, I think I'd rather be riding an 8.5/14.6 with 149s than an 8.75/14.6 with 159s. The 8.75 is a fun board, though. Every once in awhile I'll break it out for a street session, and despite being a boat, it feels really good when you hit stuff perfect on it.

[Woodshop]

Expand Quote

Expand Quote

I was a fan of the 8.5 Full for bigger transition. I've since switched over to the 8.75 shape (same 14.6 WB that the 8.5 full had), but I am running 159s on that...and I kind of like 149s more (8.25 with 144s is my street board).

[close]

Those 8.75s are such a solid board - I have a few second hand white eagles from people, which are a little more nimble than the 9" orange eagles but way more stable than the other smaller boards like the ones I usually ride in 8.38 or 8.5 with 149s too.

Did you mean you have tried 149s on it, or you would like to try them on it?

[close]

It's been awhile since I rode an 8.5 full. That said, I think I'd rather be riding an 8.5/14.6 with 149s than an 8.75/14.6 with 159s. The 8.75 is a fun board, though. Every once in awhile I'll break it out for a street session, and despite being a boat, it feels really good when you hit stuff perfect on it.

Ah yeah, got it now.

After trying out quite a few different options in between, I went up from 8.125 black eagle on 139s (then 144s) to now being on the 8.38 olive eagle on 149s, so that is a nice slightly wider but still nimble setup and one I know will not be out of stock so I kept skating that size and shape, especially compared to the bigger feeling 8.38 Full or 8.5 Full which I have 60mm classics on for a go fast board, but have tucked the rest away in case I need a retirement board package, so to speak. 

Funny that as soon as they stopped production on all of those, I stopped skating them for the most part, because I knew if or when I ran out, I doubt I could find any more.

[Sedition]

Expand Quote

Expand Quote

Expand Quote

I was a fan of the 8.5 Full for bigger transition. I've since switched over to the 8.75 shape (same 14.6 WB that the 8.5 full had), but I am running 159s on that...and I kind of like 149s more (8.25 with 144s is my street board).

[close]

Those 8.75s are such a solid board - I have a few second hand white eagles from people, which are a little more nimble than the 9" orange eagles but way more stable than the other smaller boards like the ones I usually ride in 8.38 or 8.5 with 149s too.

Did you mean you have tried 149s on it, or you would like to try them on it?

[close]

It's been awhile since I rode an 8.5 full. That said, I think I'd rather be riding an 8.5/14.6 with 149s than an 8.75/14.6 with 159s. The 8.75 is a fun board, though. Every once in awhile I'll break it out for a street session, and despite being a boat, it feels really good when you hit stuff perfect on it.

[close]

Ah yeah, got it now.

After trying out quite a few different options in between, I went up from 8.125 black eagle on 139s (then 144s) to now being on the 8.38 olive eagle on 149s, so that is a nice slightly wider but still nimble setup and one I know will not be out of stock so I kept skating that size and shape, especially compared to the bigger feeling 8.38 Full or 8.5 Full which I have 60mm classics on for a go fast board, but have tucked the rest away in case I need a retirement board package, so to speak. 

Funny that as soon as they stopped production on all of those, I stopped skating them for the most part, because I knew if or when I ran out, I doubt I could find any more.

Talk to me about the 8.125 eagle. I had one of those a long time ago. I remember the tail being longer than almost any other DLX deck, coming in at close to 8.6/8.7. Is my memory wrong, or is that true? Also, is the 8.125 eagle the same dimensions as the other 8.12/31.32 (e.g. Curb Riot) shapes? I have not taken as close a look at the sub 8.25 decks as I should.

The 8.38/14.5 is nice, too. The nose/tail are tad too rounded for me (compared to the 8.25 or the 8.75), but it does ride nice. I kind of trip out on decks that are half-way between standard truck sizes. Like, the which-one-do-I-put-on madness ensues.

[Woodshop]

Talk to me about the 8.125 eagle. I had one of those a long time ago. I remember the tail being longer than almost any other DLX deck, coming in at close to 8.6/8.7. Is my memory wrong, or is that true? Also, is the 8.125 eagle the same dimensions as the other 8.12/31.32 (e.g. Curb Riot) shapes? I have not taken as close a look at the sub 8.25 decks as I should.

The 8.38/14.5 is nice, too. The nose/tail are tad too rounded for me (compared to the 8.25 or the 8.75), but it does ride nice. I kind of trip out on decks that are half-way between standard truck sizes. Like, the which-one-do-I-put-on madness ensues.

Sometimes I wonder what was going on with older setups I had been on for ages, like the 8.125 and had a number of 8.18 before that, which are a slightly smaller version of the 8.25 but the reality is being more into transition and having the deck last as long as possible, the longer tails were exactly what I wanted.

The 8.125 x 32 with a 14.25 wheelbase allowed for, as you said, the longest tail of all DLX shapes, about 6.8" but overall that setup was very much still an 8" with a better shape (on 139s), when compared to the bigger boards - 8.25 in DLX shapes are way more like 8.3+ for other brands and always worked better with 149s, all before 144s came out.

Those shorter 8.12 and 8.28 and whatever other shapes now didn't even register on the interest list for me, not back then and not now either, but that is not to say that they aren't great for the shorter skaters out there, of which there are lots. I recall getting one and passing it on after the first session - way too small (short) for me.

Re truck sizes, I like the wheels to be to the same line as the deck, so 144s on 8.125 worked well, similarly 149s work perfectly on 8.38 DLX ( which is more like 8.5 anyway) so no magic carpet rides here.

That is why I would say the 8.25 is about the perfect all rounder, as I do have a couple set up - one on 144s, one on 149s, which were second hand from others and I can understand the attraction - they are great boards.

[FatGuy92]

Not sure if BA is being serious, but he mentions testing a new board on his IG. Is DLX coming out with something like a Pop Secret type deck?

Edit: Damn he took down the post and I didn't screenshot it

[Dan Gerous]

Maybe they're making Heavyweights again...

[commander jameson]

Man, I miss 8.06 Full shapes.
Hope they will return.

[Woodshop]

For @Sedition

This one I had meant to post a while back, when there was talk about the size stickers, but for whatever reason I hadn't posted, or the pics were blurry or whatever, but today I had the time and inclination to take more pics again and post this:

DLXSF deck sticker variations

Over the years DLXSF has had some of the most easily recognisable stickers on their decks, from the first sort with just the width, then the width and wheelbase, then width wheelbase and length, etc. I could have taken pics of all the sizes and shapes I have, but would run out of frames, so just doing the 8.5 for now.

The latest ones (not shown) also have something along the lines of "When you're done, pass it on" but not those words exactly, mainly to encourage people to pass on their old product to those who need it.

The main thing with the dimension stickers is to show the options in the board shapes too, with the 8.5 having a few options, as per the pics, one a shorter board, one a good size medium length and one with a longer wheelbase to keep everyone happy. The other interesting thing to note is all three decks are pressed differently, so the wheelbase matches the concave perfectly in each, rather than just having one mold for all and having lots of flat after the bolts on the shorter one, to none on the longer one.

As much as I prefer the 8.38 size and shape nowdays, I have had quite a few of all of these over the years too, which have been good for different things, eg short one for street, medium for an all rounder and long for big ramp (also preferred by the vert guys I know).

As the emerging trend is towards shorter wheelbases, the last one is most likely not going to be in production much, if at all, with another even shorter one out now for Real in the current catalog, with a 14.0 wheelbase and 31.75 length.

[commander jameson]

With 8.06 full not being produced in last couple of seasons my option was regular DLX 8.06 with 14.38 wheelbase.
Those are also very nice shapes, bit tapered nose and tail, tail is bit longer than on full shape and wheelbase is bit shorter. Overall deck is like 2mm shorter than full 8.06 shape.
By the way, I discovered that DGK 8.06 shapes are completely same as DLX regular 8.06 with 14.38 wheelbase (both produced by BBS).
I like long and narrow decks, I had BBS produced Sk8mafia that was 7.8 with 14.44 wheelbase and 32 overall length, that shape was awesome.

[Sedition]

As the emerging trend is towards shorter wheelbases, the last one is most likely not going to be in production much, if at all, with another even shorter one out now for Real in the current catalog, with a 14.0 wheelbase and 31.75 length.

I have not seen one of these in person yet. It seems like without dropping length, these things would have abnormally long nose/tails.

[Woodshop]

Expand Quote

As the emerging trend is towards shorter wheelbases, the last one is most likely not going to be in production much, if at all, with another even shorter one out now for Real in the current catalog, with a 14.0 wheelbase and 31.75 length.

[close]

I have not seen one of these in person yet. It seems like without dropping length, these things would have abnormally long nose/tails.

To break down the dimensions, a 31.75 long deck with a 14 wheelbase has about a 7" nose and 6.5" tail, which is pretty much standard, give or take a bit less length in nose and a bit more in the tail, eg 6.9 nose and 6.6 tail which would still skate pretty well.

The blue eagle 8.5 short length of the main ones has a slightly shorter nose than that at 6.875 and tail at 6.5 whereas the slightly longer 32.25 length with 14.38 wb has a 7" nose and 6.5" tail, same as the above size with 14.0" wb.

The standard DLX 8.25 x 32 has 14.38 wb with 6.87 nose and 6.5 tail, for reference.


I get what you are saying though, as I prefer slightly longer tails, but one Alien Workshop deck that was 32.25 long with a 14.1 wheelbase had a very long nose and tail for what I was used to, which put me off and made everything different.  Passed that one on to someone else after a couple of sessions.

[MOE SYZLAK]

With 8.06 full not being produced in last couple of seasons my option was regular DLX 8.06 with 14.38 wheelbase.
Those are also very nice shapes, bit tapered nose and tail, tail is bit longer than on full shape and wheelbase is bit shorter. Overall deck is like 2mm shorter than full 8.06 shape.
By the way, I discovered that DGK 8.06 shapes are completely same as DLX regular 8.06 with 14.38 wheelbase (both produced by BBS).
I like long and narrow decks, I had BBS produced Sk8mafia that was 7.8 with 14.44 wheelbase and 32 overall length, that shape was awesome.

I’m also bummed that DLX isn’t making the 8.06 full anymore. That was my go to. I’ve been riding 8.0 Alltimers the last few boards  and the shape is pretty close to the DLX shape I liked. The wood is great and skating a Sablone board is pretty tight too.

[MaXX_I-D]

Has anyone skated an Ishod 8.0 or 8.25 twin tail and a deck with a 14.38 wb? They’re supposed to be a 14.3 and 14.33 wb so I was wondering if there was actually a noticeable difference.

[FatGuy92]

Anyone know the nose/tail length of the 8.28 shape?

[Woodshop]

Anyone know the nose/tail length of the 8.28 shape?

Pretty sure both the nose and tail are longer than these dimensions as listed on Tactics, but not by much.

Maybe more like 6.825 nose and 6.5 tail on the one I had I think, but still fairly normal all up.

https://www.tactics.com/real/harry-lintell-oval-828-skateboard-deck/brown

https://www.tactics.com/real/mason-eyes-828-skateboard-deck

WIDTH (IN):   8.28
LENGTH (IN):   31.7
WHEELBASE (IN):   14.125
NOSE (IN):   6.75
TAIL (IN):   6.375

Those dimesions don't add up to the length correctly anyway, short .2 all up.

Trucks are 4.25 wheelbase 14.125, nose 6.75 and tail at 6.375 adds up to 31.5 total, so a tail at 6.575 adds up to 31.7 as stated.

I can measure the one I still have (not here right now) and correct those numbers as needed.

[commander jameson]

Anyone know the nose/tail length of the 8.28 shape?

Best webshop that lists all deck dimensions is r-fskate.com from Japan, they list measurements in metric.

Couple listings for 8.28 shape
https://r-fskate.com/shopdetail/000000017391
or
https://r-fskate.com/shopdetail/000000017393

According to that site tail is around 6.4 and nose around 6.8 for Mason 8.28 shape.
There could be slight differences between same shapes based on deck location in stack.

[Woodshop]

Expand Quote

Anyone know the nose/tail length of the 8.28 shape?

[close]

Best webshop that lists all deck dimensions is r-fskate.com from Japan, they list measurements in metric.

Couple listings for 8.28 shape
https://r-fskate.com/shopdetail/000000017391
or
https://r-fskate.com/shopdetail/000000017393

According to that site tail is around 6.4 and nose around 6.8 for Mason 8.28 shape.
There could be slight differences between same shapes based on deck location in stack.

Thanks for that shop link!


I need to keep that shop site in the quick links as they are so good with dimensions, pics and info - seen boards there before but never remembered to go back and check.

So their measurements equal 6.88" nose and 6.38" tail, which add up correctly to 31.7" total length and would definitely have been too short for my liking, which is why I would have passed it on.

Those guys who skate that shape love it though, so I can understand how that could be good for the shorter street skater.