Author Topic: The HD 4:3 thread  (Read 69579 times)

0 Members and 1 Guest are viewing this topic.

Lloyd Braun

  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 762
  • Rep: 80
Re: The HD 4:3 thread
« Reply #210 on: November 18, 2020, 01:37:19 PM »
I’m interested in getting a HD 4:3 set up. I currently have a Panasonic HMC150 and a Canon T3i with a rokinon for fisheye. Few questions could I film 4:3 with either of these? Are you guys cropping/re-formatting everything in post? If I were to get into 4:3 hd filming I’d prefer to just be able to film and not deal with all that post production work so what would be a good setup for that for under $2k? If that’s even how it works hahaha.

I’d like to get a Mk2 for my HMC150 and just get rid of the T3i which I may just do anyway is that possible to shoot 4:3 on? This has got me curious. Love the gustav reverb part anyone know what set up was used there? That new Tom Knox part had me wanting a VX1MK1 but Mk1s are rare now and stupid expensive plus I don’t wanna deal with tapes and a camera that will likely glitch and have issues constantly.

Idk nothing about HD 4:3 so a quick run down would be sick if you guys could help me out. I read the first 2 pages of this thread but didn’t see any deep explanations (sorry if I looked over them)

ferbmx

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 27
  • Rep: -2
Re: The HD 4:3 thread
« Reply #211 on: November 18, 2020, 03:06:15 PM »

Lloyd Braun

  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 762
  • Rep: 80
Re: The HD 4:3 thread
« Reply #212 on: November 18, 2020, 04:16:07 PM »
Saw that earlier! Looks great. But Mk1s are going for over $1500 and I ain’t ready to invest that much haha

Jordan Wiens

  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 915
  • Rep: 48
  • @wardenjeans
    • portfolio avatar image
Re: The HD 4:3 thread
« Reply #213 on: November 18, 2020, 09:12:57 PM »
https://youtu.be/sIkMRmqho-I

hmc150 opteka mk2

but that mk1 made me nut
youtube.com/wardenjeans
twitch.tv/wardenjeans

JMSneep

  • Trade Count: (0)
  • Sr. Member
  • ****
  • Posts: 375
  • Rep: 147
Re: The HD 4:3 thread
« Reply #214 on: November 18, 2020, 11:25:39 PM »
tested out this Meike 3.5mm fisheye on GH4 yesterday:

https://www.instagram.com/p/CHwuZ97FBWW/

Lloyd Braun

  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 762
  • Rep: 80
Re: The HD 4:3 thread
« Reply #215 on: November 19, 2020, 06:37:19 AM »
https://youtu.be/sIkMRmqho-I

hmc150 opteka mk2

but that mk1 made me nut

Damn that looks great!

fickdiepolizei666

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 217
  • Rep: -7
  • 1312
Re: The HD 4:3 thread
« Reply #216 on: November 26, 2020, 12:54:01 AM »
tested out this Meike 3.5mm fisheye on GH4 yesterday:

https://www.instagram.com/p/CHwuZ97FBWW/

this looks sick!
did you film in anamorphic mode or normal and then just cropped it? also, is that the "natural" vig or an overlay? looks good anyway

Burton Ernie

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 1007
  • Rep: 68
    • Black Mesa avatar image
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
Re: The HD 4:3 thread
« Reply #217 on: November 26, 2020, 06:40:46 AM »
Made this yesterday to celebrate my friend Gabe's 40th birthday. Bit of a rush job, but it's HD 4:3 nonetheless. Canon XA20, Century Mk 1, shitty onboard mic because my mic died.

https://youtu.be/Q9Os66G126Y


yep yep

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 1567
  • Rep: 91
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
Re: The HD 4:3 thread
« Reply #218 on: November 26, 2020, 10:42:48 AM »
Made this yesterday to celebrate my friend Gabe's 40th birthday. Bit of a rush job, but it's HD 4:3 nonetheless. Canon XA20, Century Mk 1, shitty onboard mic because my mic died.

https://youtu.be/Q9Os66G126Y
looks sick

JMSneep

  • Trade Count: (0)
  • Sr. Member
  • ****
  • Posts: 375
  • Rep: 147
Re: The HD 4:3 thread
« Reply #219 on: November 26, 2020, 02:03:56 PM »
Expand Quote
tested out this Meike 3.5mm fisheye on GH4 yesterday:

https://www.instagram.com/p/CHwuZ97FBWW/
[close]

this looks sick!
did you film in anamorphic mode or normal and then just cropped it? also, is that the "natural" vig or an overlay? looks good anyway


Thanks! It's in "normal" mode and cropped to 4:3. The vig is natural, you can even see the grip of the camera on the top-right corner, it's so wide!

ThePeoplesChamp

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 220
  • Rep: -14
Re: The HD 4:3 thread
« Reply #220 on: December 09, 2020, 09:40:13 AM »

edssexTOY

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 191
  • Rep: 21
Re: The HD 4:3 thread
« Reply #221 on: December 09, 2020, 09:59:37 AM »
Chefs Kiss

https://www.youtube.com/watch?v=_jIZuXup-B0

Beat me to it. So damn good. I wish I knew Miguel Valle's set up, he's perfected the HD 4:3 imo.


"The next time I see those fucking French dudes Vivien is dead!"

ThePeoplesChamp

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 220
  • Rep: -14
Re: The HD 4:3 thread
« Reply #222 on: December 09, 2020, 11:01:40 AM »
Expand Quote

Beat me to it. So damn good. I wish I knew Miguel Valle's set up, he's perfected the HD 4:3 imo.

Sony FS5 with the Canon 8-15mm Fisheye. Films 16:9 and uses the 4:3 crop markers.

edssexTOY

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 191
  • Rep: 21
Re: The HD 4:3 thread
« Reply #223 on: December 12, 2020, 08:41:16 AM »
Expand Quote
Expand Quote

Beat me to it. So damn good. I wish I knew Miguel Valle's set up, he's perfected the HD 4:3 imo.
[close]


Sony FS5 with the Canon 8-15mm Fisheye. Films 16:9 and uses the 4:3 crop markers.

Oh wow thank you!


"The next time I see those fucking French dudes Vivien is dead!"

aquilateufo

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 2
  • Rep: 0
Re: The HD 4:3 thread
« Reply #224 on: December 18, 2020, 01:10:15 PM »
currently experimenting with the sony NX80 and the mk1, looks super good and about the same form factor as the vx, which is also a big plus:)

congrats on karaoke round two! any more thoughts on the nx80+mkI setup? fully satisfied with it?

https://www.youtube.com/watch?v=cCWYEV-YmHA

fickdiepolizei666

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 217
  • Rep: -7
  • 1312
Re: The HD 4:3 thread
« Reply #225 on: December 18, 2020, 01:29:15 PM »
Expand Quote
currently experimenting with the sony NX80 and the mk1, looks super good and about the same form factor as the vx, which is also a big plus:)
[close]

congrats on karaoke round two! any more thoughts on the nx80+mkI setup? fully satisfied with it?

https://www.youtube.com/watch?v=cCWYEV-YmHA

damn this looks really good! also the arnhem central station looks so fun to skate, tbh most spots in the netherlands do.

fs1/2cab

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 1953
  • Rep: 595
    • a short part avatar image
Re: The HD 4:3 thread
« Reply #226 on: December 19, 2020, 10:23:54 AM »
Made this yesterday to celebrate my friend Gabe's 40th birthday. Bit of a rush job, but it's HD 4:3 nonetheless. Canon XA20, Century Mk 1, shitty onboard mic because my mic died.

https://youtu.be/Q9Os66G126Y

40 years young right there. really enjoyed that! cheers
IG: @flowterspace

Jordan Wiens

  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 915
  • Rep: 48
  • @wardenjeans
    • portfolio avatar image
Re: The HD 4:3 thread
« Reply #227 on: December 21, 2020, 03:17:35 PM »
https://www.youtube.com/watch?v=d_pzTSqmGfc

Meike 3.5mm looking like the lens to go with if youve got a micro4/3rd lens. It's so small and wide that a bit of the camera grip shows up in the shot but if pushed over or fake vig is added its perfect. This was by my aussie homie who just got back into filming.
youtube.com/wardenjeans
twitch.tv/wardenjeans

doyle

  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 924
  • Rep: 210
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
Re: The HD 4:3 thread
« Reply #228 on: December 22, 2020, 10:08:52 AM »
Definitely a good option, especially for the price, but I still prefer the way the 8-15mm looks.

fs1/2cab

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 1953
  • Rep: 595
    • a short part avatar image
Re: The HD 4:3 thread
« Reply #229 on: December 24, 2020, 02:07:28 PM »
I am starting to learn a bit about editing, please kook me when my questions are dumb.

The clips I have are all 16:9, with 1920x1080p and 50fps.
What settings (pixel and fps) should I use to create a smooth clip in 4:3?
I edit on my phone since I don't have a computer now.
IG: @flowterspace

fickdiepolizei666

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 217
  • Rep: -7
  • 1312
Re: The HD 4:3 thread
« Reply #230 on: December 25, 2020, 03:06:19 AM »
I am starting to learn a bit about editing, please kook me when my questions are dumb.

The clips I have are all 16:9, with 1920x1080p and 50fps.
What settings (pixel and fps) should I use to create a smooth clip in 4:3?
I edit on my phone since I don't have a computer now.

1440x1080p should do the job. for the fps just keep the 50 if you want it real smooth

1qBurner

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 1
  • Rep: 0
Re: The HD 4:3 thread
« Reply #231 on: December 30, 2020, 09:13:19 PM »
Hey, I can't find an answer to this and I can't tell if it's because if I'm an idiot or not.
On the HMC150, when you are attaching the Mk1, what size step-up or down ring do you need?
I know the camera side is 72mm—does the fisheye side of the step-up ring matter?
or does it not matter because you're gluing it anyway?

nolliecrooked

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 138
  • Rep: -23
Re: The HD 4:3 thread
« Reply #232 on: January 01, 2021, 04:39:18 AM »
nowdays after 8~ years of filming I like the way my footage looks and woudnt go HD 4:3, will stick to 16:9, but damn, people should do more of that for sure!!

cosmicgypsies

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 2558
  • Rep: 626
Re: The HD 4:3 thread
« Reply #233 on: January 01, 2021, 04:42:53 AM »
Made this yesterday to celebrate my friend Gabe's 40th birthday. Bit of a rush job, but it's HD 4:3 nonetheless. Canon XA20, Century Mk 1, shitty onboard mic because my mic died.

https://youtu.be/Q9Os66G126Y

firstly that ramp/park setup looks fuckin rad
secondly your homie is fuckin ripping
thirdly that was filmed/edited real well

Burton Ernie

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 1007
  • Rep: 68
    • Black Mesa avatar image
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
Re: The HD 4:3 thread
« Reply #234 on: January 07, 2021, 10:09:14 PM »
Expand Quote
Made this yesterday to celebrate my friend Gabe's 40th birthday. Bit of a rush job, but it's HD 4:3 nonetheless. Canon XA20, Century Mk 1, shitty onboard mic because my mic died.

https://youtu.be/Q9Os66G126Y
[close]

firstly that ramp/park setup looks fuckin rad
secondly your homie is fuckin ripping
thirdly that was filmed/edited real well

Thanks for the love @cosmicgypsies, and @yep yep and @fs1/2cab as well! Gabe definitely rips, most of those tricks were in runs and/or within a couple tries, but I chopped it up for the sake of the edit.

Burton Ernie

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 1007
  • Rep: 68
    • Black Mesa avatar image
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
Re: The HD 4:3 thread
« Reply #235 on: January 07, 2021, 10:11:25 PM »
Also, the ramp is a private spot in Oklahoma City, if you’re ever in the area hit me up, can prob get a sesh in.

suckmadeck

  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 569
  • Rep: 27
Re: The HD 4:3 thread
« Reply #236 on: January 08, 2021, 12:46:39 AM »
I've been experimenting with the HPX using an Opteka 72mm fisheye with 2 spacer rings. I did a test in standard 720p 60p then cropping/using a 4:3 overlay. Then I also tried it out in 480i 60i, using the in camera Squeeze to 4:3. I'll edit it together and throw it up on YouTube for people to see.

Ziggy Schaap

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 15
  • Rep: 3
Re: The HD 4:3 thread
« Reply #237 on: January 09, 2021, 12:27:00 AM »
Expand Quote
currently experimenting with the sony NX80 and the mk1, looks super good and about the same form factor as the vx, which is also a big plus:)
[close]

congrats on karaoke round two! any more thoughts on the nx80+mkI setup? fully satisfied with it?

https://www.youtube.com/watch?v=cCWYEV-YmHA

I really liked it, the camera is more menu-based than the vx and also a litte bit lighter and more out of balance with the fisheye mounted but over all it really feels alot like a vx, files are huge though compared with sd footage.
@karaokeskate / karaokeskate.com

Judychamagnee

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 6
  • Rep: 0
Re: The HD 4:3 thread
« Reply #238 on: January 18, 2021, 01:26:36 AM »
www.instagram.com/p/CKLHmf8gCqD/?igshid=1ayeqyshg6s0a 

Not sure how to link an Instagram video but this is a canon xa11/Mk1 mounted with the vx1000 bayo ring

Judychamagnee

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 6
  • Rep: 0
Re: The HD 4:3 thread
« Reply #239 on: January 18, 2021, 01:28:17 AM »
I guess it worked haha