Big Boards 9"+( I wanna hear big boys talk about their big boards)

[Skrotum]

Expand Quote

I have a heroin dead dave 10" with some stage 10 215 gonz indys and im not getting a good turn with the stage 10s. Anybody have a recommendation on what truck turns better an ace 66  (maybe wait for the new 77) or stage 11 215s?

[close]

What size risers are you using?  You need a bit more height than usual to dig into the turns I find. They feel really shallow without risers or with 1:8th

Yeah I have 1/8" risers on. I'll put on some 1/4" with some softer bushings hopefully that will work

[bigdave]

ughhh you guys are making me wanna order a Dead Dave.

[yourbreakfsat]

Was waiting for new Aces, but these Thunders have been collecting dust for too long.







Zmorgf (brand I'm building up) Land Boat Blue Dip 10.25" x 31.56" with 14 - 14.5" adjustable wb

Thunder 161 Hollow Lights with Thunder 148 stock bushings

NFG MFG 54.5mm 103a(52d) Vee Shape

Bones Swiss

Bones 1" hardware

Bones 1/8" risers

Bones Rib Bones with 1 missing screw

Black Jessup with yellow Shake Junt

Posca Paint Pens

[jtrpma]

Was waiting for new Aces, but these Thunders have been collecting dust for too long.







Zmorgf (brand I'm building up) Land Boat Blue Dip 10.25" x 31.56" with 14 - 14.5" adjustable wb

Thunder 161 Hollow Lights with Thunder 148 stock bushings

NFG MFG 54.5mm 103a(52d) Vee Shape

Bones Swiss

Bones 1" hardware

Bones 1/8" risers

Bones Rib Bones with 1 missing screw

Black Jessup with yellow Shake Junt

Posca Paint Pens

Such a nice looking shape!
How wide is it over the back truck?
Very intriguing

[yourbreakfsat]

Expand Quote

Was waiting for new Aces, but these Thunders have been collecting dust for too long.







Zmorgf (brand I'm building up) Land Boat Blue Dip 10.25" x 31.56" with 14 - 14.5" adjustable wb

Thunder 161 Hollow Lights with Thunder 148 stock bushings

NFG MFG 54.5mm 103a(52d) Vee Shape

Bones Swiss

Bones 1" hardware

Bones 1/8" risers

Bones Rib Bones with 1 missing screw

Black Jessup with yellow Shake Junt

Posca Paint Pens

[close]

Such a nice looking shape!
How wide is it over the back truck?
Very intriguing

Thanks!

I can't find my tape measure (I seemed to have misplaced a ton of my tools), but it was around 8.5" IIRC

[beandemon]

Was waiting for new Aces, but these Thunders have been collecting dust for too long.







Zmorgf (brand I'm building up) Land Boat Blue Dip 10.25" x 31.56" with 14 - 14.5" adjustable wb

Thunder 161 Hollow Lights with Thunder 148 stock bushings

NFG MFG 54.5mm 103a(52d) Vee Shape

Bones Swiss

Bones 1" hardware

Bones 1/8" risers

Bones Rib Bones with 1 missing screw

Black Jessup with yellow Shake Junt

Posca Paint Pens

Looks super decent. What’s with the 148 bushings in the 161’s? It’s the second time on slap in a few days I’ve read someone running thunders with bushings from a smaller truck.

[yourbreakfsat]

Expand Quote

Was waiting for new Aces, but these Thunders have been collecting dust for too long.







Zmorgf (brand I'm building up) Land Boat Blue Dip 10.25" x 31.56" with 14 - 14.5" adjustable wb

Thunder 161 Hollow Lights with Thunder 148 stock bushings

NFG MFG 54.5mm 103a(52d) Vee Shape

Bones Swiss

Bones 1" hardware

Bones 1/8" risers

Bones Rib Bones with 1 missing screw

Black Jessup with yellow Shake Junt

Posca Paint Pens

[close]

Looks super decent. What’s with the 148 bushings in the 161’s? It’s the second time on slap in a few days I’ve read someone running thunders with bushings from a smaller truck.

Thanks!

I put in the bushings because they're already broken in and breaking in Thunder bushings is like breaking in Ace bushings (aka a terrible process). The geometry is the same, just different color.

[Huell Howser]

Black Label Lucero Street Thing - 9.88
OJ rails
Indy 159's
Spitfire 54 classics(maybe 56, forget at this point)

[Freelancevagrant]

Ohhh she’s a beauty, huell.

[Fhk]

Holyfuck.

[animalflesh]

Very rad

[Huell Howser]

thank you freelance, fhk and thom!

I have an 8.5 krooked I am riding as a regular setup and then pulled the trigger on this deck yesterday because I had the trucks/wheels already lying around. Super stoked on it! I haven't had a black label board in probably 10 years so I am happy I picked another one up

[Uncle Poseur]

Expand Quote

[close]

Holyfuck.

That thing is so badass. I ride a Label Lucero model, but that is tempting as fuck!
Never be bought, never be sold!

[Fhk]

Got this New Deal Templeton Reissue - Resin 7
10.125 x 31.9
Wheelbase 14.5
Indy 169s with a cracked pivot cup
Spitfire 56mm 97a Classics
Welcome / Professor Schmitt 'Candy Bar' Rails

Been after the Candy Bars for years, stoked to get a few sets.    Couldnt decide what colour to put on, so went classic.  Man, these things slide...  It's like they're full of wax.  Amazing. They're basically Schmitt Stix Type II Rails, which were my favorite back in the day.

The board feels amazing, super crisp and the shape rules.  Really similar to my Tired board I retired.  I always wanted a New Deal back in the day, but they were too hard to get in suburban Australia.

1- this is a phenomenal grip job

2- did Polar put out a 9" pop w/o wheel wells in this drop?

[jay_nev]

@Fhk hu no only 9” pop this drop was the Dane

[Fhk]

@Fhk hu no only 9” pop this drop was the Dane

Thanks man, I just found a 9" Alv from an older drop on Parade.

[FrozenIndustries]

Really hope I like this shape.

@bigdave do you happen to know the WB and length (tape straight, not pushed in) for this? Can't find it anywhere online that I trust.

[bigdave]

Expand Quote

Really hope I like this shape.

[close]

@bigdave do you happen to know the WB and length (tape straight, not pushed in) for this? Can't find it anywhere online that I trust.

@Freelancevagrant  Yo yo. 14.75 WB! I actually thought it was 14.5 when I ordered it, but its great (and, you know, ACE)
length, straight-tape, 32 5/8"

[FrozenIndustries]

Expand Quote

Expand Quote

Really hope I like this shape.

[close]

@bigdave do you happen to know the WB and length (tape straight, not pushed in) for this? Can't find it anywhere online that I trust.

[close]

@Freelancevagrant  Yo yo. 14.75 WB! I actually thought it was 14.5 when I ordered it, but its great (and, you know, ACE)
length, straight-tape, 32 5/8"

Thanks, going to get one! I owe you a gnar.

[bigdave]

Expand Quote

Expand Quote

Expand Quote

Really hope I like this shape.

[close]

@bigdave do you happen to know the WB and length (tape straight, not pushed in) for this? Can't find it anywhere online that I trust.

[close]

@Freelancevagrant  Yo yo. 14.75 WB! I actually thought it was 14.5 when I ordered it, but its great (and, you know, ACE)
length, straight-tape, 32 5/8"

[close]

Thanks, going to get one! I owe you a gnar.

Oh sorry dude I got the name wrong! and thanks! Whats a gnar?

[FrozenIndustries]

Went on a little shopping spree this weekend and this 9.75" Scram is one of the things I picked up:




Looks pretty wild.

[Mbrimson88]

Went on a little shopping spree this weekend and this 9.75" Scram is one of the things I picked up:




Looks pretty wild.

Yeah!!

Any idea who makes them now?  I had a few suggestions, but nothing consistent.   They were BBS at one point, but the most recent one I saw here in AU last year was very chunky and not finished on the sides at all, so not BBS.

Thanks!

[animalflesh]

They go back and forth to generator from what I remember

[FrozenIndustries]

@Mbrimson88 @Thom no idea, just has the little divet on the top over the front trucks but nothing else. Stained top ply, everything else is natural.

[Mbrimson88]

@Mbrimson88 @Thom no idea, just has the little divet on the top over the front trucks but nothing else. Stained top ply, everything else is natural.

No worries.

It might be harder to figure out if you don't get to stand on way too many boards like I do, which I use to compare wood more often than not with no other markings on the decks to identify where they came from.

BBS / Generator wood usually has more spoon shaped kicks in their molds, so even up into the kicks there is a bit of concave running across the board with no straight edge where the kick meets the deck, if that makes sense.


I keep thinking I saw some from Watson / Prime or a similar woodshop too, but any which way, it looks like a whole lot of fun!

[palelight]

Looking for an excuse to get some AF1's. Anyone have the over-the-truck measurements for the Dead Dave Giallo deck? I'm  guessing it's a 66 type of situation.

[babywantsbluevelvet]

Looking for an excuse to get some AF1's. Anyone have the over-the-truck measurements for the Dead Dave Giallo deck? I'm  guessing it's a 66 type of situation.

Don’t have it handy, but the front truck deck width is a good half inch less than the 9” AF1 axles when using the 14.5” wheelbase mounting holes. You’ll see your front wheels poking out on account of the aggro nose shortness and taper, but I think any axles smaller than 9” would be too narrow at the back. I have mine on 169s and believe this to be correct. I think seeing the front wheels is just part of the experience on this shape, at least using the 14.5” wb option. Could maybe see doing 159s with wideboi cruiser wheels, which is actually my plan for converting it to a summer cruiser next month.

[Monkey_Mcpott]

New ones

Polar 1991 shape 9.25 x 32.125 WB 14.5
Indy 169s with red 88a bushings
56mm F4 Conical Fulls
Real wood risers
Swiss



Krooked Gonz Beamer 10.75 x 34 WB 16.12
Indy 215s with red 88a bushings
60mm OG Classics
1/4 Risers
Swiss

[Esmith5488]

New ones

Polar 1991 shape 9.25 x 32.125 WB 14.5
Indy 169s with red 88a bushings
56mm F4 Conical Fulls
Real wood risers
Swiss



Krooked Gonz Beamer 10.75 x 34 WB 16.12
Indy 215s with red 88a bushings
60mm OG Classics
1/4 Risers
Swiss

both of those are sick! Your a wild man for kickflipping that Beamer

[Sk.A.T.A.N]

Expand Quote

New ones

Polar 1991 shape 9.25 x 32.125 WB 14.5
Indy 169s with red 88a bushings
56mm F4 Conical Fulls
Real wood risers
Swiss



Krooked Gonz Beamer 10.75 x 34 WB 16.12
Indy 215s with red 88a bushings
60mm OG Classics
1/4 Risers
Swiss

[close]

both of those are sick! Your a wild man for kickflipping that Beamer

About 3 years ago I was at the Supreme store in Brooklyn and ended up at the bowl they have there. Scott Johnston and Alex Olson where ripping the bowl and I noticed that the Gonz Beamer was left there, so I sneakily did a kickflip on it and put it back where it was. Literally felt like kick flipping a ironing board.
Picture of said beast: