Big Boards 9"+( I wanna hear big boys talk about their big boards)

[Plan9Customs]

while we're on the subject of tapers...
ugh so I picked up this scram and it's a 9.5 so I'm thinking my 169s will fit perfect, alas I didn't realize the back tapers down to an 8.75. and I HATE seeing my wheels. I'm still putting off setting it up til I have some cool shit for a grip job, and just praying it will miraculously get wider and fit my trucks. if not then 166s here I come I guess...
second pic is sitting on top of my current deck, it really looks exactly the same but still my anxiety skyrockets

LUPE POR VIDA

Had you mentioned it here I probably could’ve told ya. And yes LUPE POR VIDA!

[Plan9Customs]

Expand Quote

I know @Mbrimson88 isnt in the states but if you guys are you may want to check out Motuary Skates. One of Gurneys shapes is like a cross between a Sweatpants and Manvan(or Street thing same shape).

[close]

That does look like a good one too.

Still PS Stix for wood?  That's what I had it as for the woodshop listing.


Some people who are not too fond of BBS might prefer that one as well, just as another option.


https://www.mortuaryskates.com/


I can only see 9.625 as width, so what are the other dimensions on that board?

Thanks.

Finally got it dug out, here’s the other dims:

[KILLEDTHEPOOL]

Expand Quote

while we're on the subject of tapers...
ugh so I picked up this scram and it's a 9.5 so I'm thinking my 169s will fit perfect, alas I didn't realize the back tapers down to an 8.75. and I HATE seeing my wheels. I'm still putting off setting it up til I have some cool shit for a grip job, and just praying it will miraculously get wider and fit my trucks. if not then 166s here I come I guess...
second pic is sitting on top of my current deck, it really looks exactly the same but still my anxiety skyrockets

LUPE POR VIDA

[close]

Had you mentioned it here I probably could’ve told ya. And yes LUPE POR VIDA!

yah I should have just had some balls and got one of the 10s, but I guess I'm cornered into sizing down my trucks. i really need fatter wheels too so I might just go all the way down to 159s... I miss being a kid and not paying attention to any of this

[Crailslideyoface]

https://www.awhsales.com/p-83657-heroin-team-wide-boy-egg-shaped-deck-1075.aspx

New Heroin drop has a 10.75 egg called the Wide Boy. Couldn't get my hands on an Eggzilla last time so I'm gonna lurk hard to snag a Wide Boy

Are you looking for one still? I think my locals got one on the shelf still

[Hefe43]

Expand Quote

https://www.awhsales.com/p-83657-heroin-team-wide-boy-egg-shaped-deck-1075.aspx

New Heroin drop has a 10.75 egg called the Wide Boy. Couldn't get my hands on an Eggzilla last time so I'm gonna lurk hard to snag a Wide Boy

[close]

Are you looking for one still? I think my locals got one on the shelf still

An eggzilla or the wide body? I’m about to swoop in on that zilla like a bloard vulture if it’s still there

[boneless900]

Expand Quote

https://www.awhsales.com/p-83657-heroin-team-wide-boy-egg-shaped-deck-1075.aspx

New Heroin drop has a 10.75 egg called the Wide Boy. Couldn't get my hands on an Eggzilla last time so I'm gonna lurk hard to snag a Wide Boy

[close]

Are you looking for one still? I think my locals got one on the shelf still

Appreciate the heads up homie but nah I gave up trying to find a wide boy. I just snagged a generator gfb 9.1 symmetrical egg (twin tail) from skate samples instead since I'm a bit short on cash and it's been tough to find wide boiz. I still think heroin boards are awesome, but I just don't have the money right now since they're pretty pricey (especially with shipping across the US).

I saw that the stingee thingee from heroin is on sale at skate warehouse though. Anybody try this shape? I think the nose portion is from a 10" egg and the tail is from their symmetrical shovel (9.5"?). Pretty wacky lookin shape but I do like the graphic

[finecojeffe]

Setting up the zogger. Decided on the smaller trucks, Ace 66. Lil jawns rails, and bones x97 55mm wheels. Haven't put it together just yet since the rails I laid on are too low profile. Just waiting on the mail to get here for the standard rails.

[WelcomeToHell]

Expand Quote

Expand Quote

https://www.awhsales.com/p-83657-heroin-team-wide-boy-egg-shaped-deck-1075.aspx

New Heroin drop has a 10.75 egg called the Wide Boy. Couldn't get my hands on an Eggzilla last time so I'm gonna lurk hard to snag a Wide Boy

[close]

Are you looking for one still? I think my locals got one on the shelf still

[close]

Appreciate the heads up homie but nah I gave up trying to find a wide boy. I just snagged a generator gfb 9.1 symmetrical egg (twin tail) from skate samples instead since I'm a bit short on cash and it's been tough to find wide boiz. I still think heroin boards are awesome, but I just don't have the money right now since they're pretty pricey (especially with shipping across the US).

I saw that the stingee thingee from heroin is on sale at skate warehouse though. Anybody try this shape? I think the nose portion is from a 10" egg and the tail is from their symmetrical shovel (9.5"?). Pretty wacky lookin shape but I do like the graphic

If you’re still looking. Since you mentioned shipping across the US I assume you’re on the east coast (or at least east of the Mississippi?). This shop is in Maryland. It’s one of my locals.

https://embarkskateshop.com/collections/decks/products/heroin-wide-boy-egg-shaped-deck-10-75

[Plan9Customs]

Setting up the zogger. Decided on the smaller trucks, Ace 66. Lil jawns rails, and bones x97 55mm wheels. Haven't put it together just yet since the rails I laid on are too low profile. Just waiting on the mail to get here for the standard rails.

Graphics are rad as always.

[finecojeffe]

Thank you, I appreciate it!

[Mbrimson88]

Expand Quote

Expand Quote

I know @Mbrimson88 isnt in the states but if you guys are you may want to check out Motuary Skates. One of Gurneys shapes is like a cross between a Sweatpants and Manvan(or Street thing same shape).

[close]

That does look like a good one too.

Still PS Stix for wood?  That's what I had it as for the woodshop listing.


Some people who are not too fond of BBS might prefer that one as well, just as another option.


https://www.mortuaryskates.com/


I can only see 9.625 as width, so what are the other dimensions on that board?

Thanks.

[close]

I’m assuming they are. That’s from their first run. I’ll try to get the rest of the dims tomorrow or this weekend.

Meant to reply earlier, but yeah thanks for the pics.

Looks like a decently big board.

[DarkPools]

Cross post from Set Up Thread!

Wanted to refresh my cruiser set up with just the bushings but realized I wasn't crazy about the Crail shape (Burly - punk nose tip one) i had. That long fingers of flat + steep tail thing + lack of concave at kicks (BBS usually has this and I love it) was fucking odd on Indys.

Naturally, I bought a new deck/grip and gave myself an excuse to use some 159s I bought last year instead of using the 149s I had since the 159s seem to fit better. Minor hotrodding in back but not terrible.

Real Guerrero R1 9.25" (forgot the other specs - lost the dims sticker)
Indy Standard 159 (conical aftermarket bushings)
Mob Grip (graphic & reg)
Indy bolts
OJ Mini Juice 53mm? (Had them since 2016 or 2017)
Bones Reds

[Enrico Pallazzo]

Anyone here ridden a Stingee Thingee? Been missing my big boy set up and the shape keeps catching my eye. Thinking Classic 55s or 169s but a little concerned about the magic carpet level in the back.

[BSslappysOnly]

I have a Stingee Thingee on Ace Classic 66s. Doesn’t hot rod in the back and doesn’t feel too much like a magic carpet in the front. 169s might work but 55s seem like they’d be too small.

[Enrico Pallazzo]

I have a Stingee Thingee on Ace Classic 66s. Doesn’t hot rod in the back and doesn’t feel too much like a magic carpet in the front. 169s might work but 55s seem like they’d be too small.

Beautiful, much appreciated.

[TheSickness]

Expand Quote

while we're on the subject of tapers...
ugh so I picked up this scram and it's a 9.5 so I'm thinking my 169s will fit perfect, alas I didn't realize the back tapers down to an 8.75. and I HATE seeing my wheels. I'm still putting off setting it up til I have some cool shit for a grip job, and just praying it will miraculously get wider and fit my trucks. if not then 166s here I come I guess...
second pic is sitting on top of my current deck, it really looks exactly the same but still my anxiety skyrockets

LUPE POR VIDA

[close]

Had you mentioned it here I probably could’ve told ya. And yes LUPE POR VIDA!

I saw that SCRAM board and knew you wouldn't be far behind!  Lol. 

[Meikil0]

Expand Quote

Expand Quote

Expand Quote

Expand Quote

Expand Quote

I'm big board curious. Don't skate a whole bunch anymore, I want to have something to roll about on at the beach front, Ollie's, no complys, curbs (Ray Barbee/Rubber boys) . I've got a regular 8.5" setup so can go wild.

Would an 80s no nose be a terrible idea? Love to hear some suggestions.

[close]

Anti-Hero Yellow Eagle - Beach Bum shape
Polar Dane 1 Shape
Krooked Sweatpants Shape

Any of those decks with a softer wheel like a Bones Dragon 93a would make for a fun cruiser/curb/fuck around board

[close]

Thanks been looking at Dane 1s for years.

[close]

Dane1's have a small wheelbase, so if that's not your cup of tea, I would recommend the Krooked Sweatpants shape (posted above on this page). The shape is similair, but the wheelbase is 14.38 compared to the new 14.1 wb of the Dane1. The old Dane decks are really similair though. Currently riding the Ronnie Sandoval graphic and I like it so far, although it feels a bit small compared to the 10" Heroin Mutants I've been riding before this.

[close]

A few pages back I think someone mentioned the new Dane1 decks are being bumped up to a 14.38”wb which will make it the same as the Krooked shape.

[close]

Yeah, you're right. I mixed them up and thought it became smaller.

I made a comment in a recent post on polar's instagram, and they told me that the Wheelbase on Dane1's was always 14.375 and the 14.125 wheelbase that appears on the website was actually an error.

[Painted Baby]

I just remeasured the 2 that I have on ice and if measuring middle hole to middle hole it's 14" and then top to bottom it's 14.125. Polar is so weird about this.

[Meikil0]

I measures mine's too and i had the same results as you, I think we will only know when someone buys the new one and measures it to compare with the old one, I really don't think the wheelbase has changed, this must have been some misunderstanding between them because a while ago the WB on the site used to be 14,375, then changed to 14,125 and now it's going back!!??? Weird asf

[Frank and Fred]

I just remeasured the 2 that I have on ice and if measuring middle hole to middle hole it's 14" and then top to bottom it's 14.125. Polar is so weird about this.

Confirmed. I had one a couple of years back and it measured the same as yours.

[yourbreakfsat]

Santa Cruz Rob Roskopp 3 10.25" x 30.03" with 15.75" wheelbase

Independent Stage 4 166

Dogtown K9 80s 58mm 99a wheels

Bones Super Red Ceramics

MOB

Real 1/8" wood risers

Powell Rib Bones

[And_so_it_goes22]

These dropped today and look pretty sick.  BBS wood, cool retro eggish shape, wheel wells and iconic art. 

https://blockheadskateboards.com/collections/featured-goods/products/rick-howard-skunk-modern?variant=46948222599472

[animalflesh]

Bought two of these decks without even seeing it in person cause I knew it would be perfect, and it is




Fixer 9.88 (14.65 WB)
169 with crazy mixed up bushings
58 97 CF
Swiss
1/8 riser
WD hardware
Rib bones
Jessup

[Daydream]

Oh hell yea

[And_so_it_goes22]

These dropped today and look pretty sick.  BBS wood, cool retro eggish shape, wheel wells and iconic art. 

https://blockheadskateboards.com/collections/featured-goods/products/rick-howard-skunk-modern?variant=46948222599472

Already sold out.   Never mind, I guess.

I have a pink one on the way, pretty hyped.  I was initially going to re-drill the front truck for a shorter WB and a little bit of a longer nose. But I guess that would defeat the point of the wheel wells. 

[Painted Baby]

Expand Quote

These dropped today and look pretty sick.  BBS wood, cool retro eggish shape, wheel wells and iconic art. 

https://blockheadskateboards.com/collections/featured-goods/products/rick-howard-skunk-modern?variant=46948222599472

[close]

Already sold out.   Never mind, I guess.

I have a pink one on the way, pretty hyped.  I was initially going to re-drill the front truck for a shorter WB and a little bit of a longer nose. But I guess that would defeat the point of the wheel wells.

Damn didn't expect those to be that hot a ticket. I was gonna run Ace 66s on it to tame the biggish wb. Measured the back bolts with the online tool and everything. I wonder if they will show up in any shops?

[And_so_it_goes22]

Expand Quote

Expand Quote

These dropped today and look pretty sick.  BBS wood, cool retro eggish shape, wheel wells and iconic art. 

https://blockheadskateboards.com/collections/featured-goods/products/rick-howard-skunk-modern?variant=46948222599472

[close]

Already sold out.   Never mind, I guess.

I have a pink one on the way, pretty hyped.  I was initially going to re-drill the front truck for a shorter WB and a little bit of a longer nose. But I guess that would defeat the point of the wheel wells.

[close]

Damn didn't expect those to be that hot a ticket. I was gonna run Ace 66s on it to tame the biggish wb. Measured the back bolts with the online tool and everything. I wonder if they will show up in any shops?

What what did you come up with as far as width over the back truck? I’ve been thinking about what trucks it’ll get. 

And at this point I’m pretty committed to redrilling it 3/8” with a Chems.  I know I’ll lose the benefit of the front wheel wells but the revised specs will work better for me. 

[Painted Baby]

Expand Quote

Expand Quote

Expand Quote

These dropped today and look pretty sick.  BBS wood, cool retro eggish shape, wheel wells and iconic art. 

https://blockheadskateboards.com/collections/featured-goods/products/rick-howard-skunk-modern?variant=46948222599472

[close]

Already sold out.   Never mind, I guess.

I have a pink one on the way, pretty hyped.  I was initially going to re-drill the front truck for a shorter WB and a little bit of a longer nose. But I guess that would defeat the point of the wheel wells.

[close]

Damn didn't expect those to be that hot a ticket. I was gonna run Ace 66s on it to tame the biggish wb. Measured the back bolts with the online tool and everything. I wonder if they will show up in any shops?

[close]

What what did you come up with as far as width over the back truck? I’ve been thinking about what trucks it’ll get. 

And at this point I’m pretty committed to redrilling it 3/8” with a Chems.  I know I’ll lose the benefit of the front wheel wells but the revised specs will work better for me.

I got 8.80 so I figured just less than a quarter inch of axle is pretty normal. AF1 60s would probably set it up to be pretty flippy and still bring the wheelbase in overall. I didn't remeasure the front but I think I remember it being 9.125 or so it would magic carpet a decent amount.

[The.Skate.Father]

Wanted a welcome sloth since I started skating again, and got it in my fave colours.
Set this up a few days ago.
Welcome bowline 9.5 x 14.5 x 33
Stage 4 166
Superjuice
Loving this setup, wanna try it with some harder wheels soon.

[GBLange]

Wanted a welcome sloth since I started skating again, and got it in my fave colours.
Set this up a few days ago.
Welcome bowline 9.5 x 14.5 x 33
Stage 4 166
Superjuice
Loving this setup, wanna try it with some harder wheels soon.

Nice one.. How's the superjuice holding up?