0 Members and 1 Guest are viewing this topic.
cast v hollows coming in fall. regular baseplate with hollow axle and kingpin. first ones will be a kader pro model.
Quote from: Lukabrazi on June 11, 2022, 09:39:46 AMExpand QuotePosting over here from the truck set up thread Low bushings working pretty damn well on inverted kingpins . Quote from: Lukabrazi on June 11, 2022, 09:36:26 AMExpand QuotePsyched on this set up at the moment Cast baseplate 5.2 lowVenture Hollow 5.2 axel Inverted kingpinVenture low bushings Crazy turn radius for low trucks . This is the loosest I’ve ever ridden my trucks and it’s been really fun. Fucking with my flat ground tricks a little but getting used to it this past week.[close][close]them green bushings brings back memories of venture featherlights..
Posting over here from the truck set up thread Low bushings working pretty damn well on inverted kingpins . Quote from: Lukabrazi on June 11, 2022, 09:36:26 AMExpand QuotePsyched on this set up at the moment Cast baseplate 5.2 lowVenture Hollow 5.2 axel Inverted kingpinVenture low bushings Crazy turn radius for low trucks . This is the loosest I’ve ever ridden my trucks and it’s been really fun. Fucking with my flat ground tricks a little but getting used to it this past week.[close][close]
Psyched on this set up at the moment Cast baseplate 5.2 lowVenture Hollow 5.2 axel Inverted kingpinVenture low bushings Crazy turn radius for low trucks . This is the loosest I’ve ever ridden my trucks and it’s been really fun. Fucking with my flat ground tricks a little but getting used to it this past week.[close]
Quote from: thanksgiving on June 12, 2022, 07:30:31 PMExpand Quotecast v hollows coming in fall. regular baseplate with hollow axle and kingpin. first ones will be a kader pro model.[close]Sauce?Guess there's hope for a Low in 8.25 and above if they are changing up the product lineup.
cast v hollows coming in fall. regular baseplate with hollow axle and kingpin. first ones will be a kader pro model.[close]
Quote from: rocklobster on June 12, 2022, 07:36:16 PMExpand QuoteQuote from: thanksgiving on June 12, 2022, 07:30:31 PMExpand Quotecast v hollows coming in fall. regular baseplate with hollow axle and kingpin. first ones will be a kader pro model.[close]Sauce?Guess there's hope for a Low in 8.25 and above if they are changing up the product lineup.[close]https://i.ibb.co/kBwMfYg/841-A3-B70-C4-D0-44-C5-A503-0774-B81-A9-FF6.jpg
Quote from: thanksgiving on June 12, 2022, 07:30:31 PMExpand Quotecast v hollows coming in fall. regular baseplate with hollow axle and kingpin. first ones will be a kader pro model.[close]Sauce?Guess there's hope for a Low in 8.25 and above if they are changing up the product lineup.[close]
Can someone give me the tldr of why so many prefer the cast plates over the forged so much?
Quote from: Spaced Cadet on June 13, 2022, 03:47:10 PMExpand QuoteCan someone give me the tldr of why so many prefer the cast plates over the forged so much?[close]The arguments in favor of cast venture plates include (1) 1.5 mm taller (resulting in 53.5 mm for the standard variants), (2) less wheelbase extension with the casts - though I forget the exact figures, and (3) forged plates have a different ride quality...to some, they feel more "tinny" and rattle more underfoot. Ultimately, it is one more thing for us to split hairs about. Both forged and cast are good options. You would be fine with either, but you know how this board works (not excluding myself from the madness by any means).
Can someone give me the tldr of why so many prefer the cast plates over the forged so much?[close]
Quote from: thanksgiving on June 13, 2022, 02:27:22 PMExpand QuoteQuote from: rocklobster on June 12, 2022, 07:36:16 PMExpand QuoteQuote from: thanksgiving on June 12, 2022, 07:30:31 PMExpand Quotecast v hollows coming in fall. regular baseplate with hollow axle and kingpin. first ones will be a kader pro model.[close]Sauce?Guess there's hope for a Low in 8.25 and above if they are changing up the product lineup.[close]https://i.ibb.co/kBwMfYg/841-A3-B70-C4-D0-44-C5-A503-0774-B81-A9-FF6.jpg[close]raw & hollow? i'm sweating that final $ amount
Quote from: rocklobster on June 12, 2022, 07:36:16 PMExpand QuoteQuote from: thanksgiving on June 12, 2022, 07:30:31 PMExpand Quotecast v hollows coming in fall. regular baseplate with hollow axle and kingpin. first ones will be a kader pro model.[close]Sauce?Guess there's hope for a Low in 8.25 and above if they are changing up the product lineup.[close]https://i.ibb.co/kBwMfYg/841-A3-B70-C4-D0-44-C5-A503-0774-B81-A9-FF6.jpg[close]
Quote from: MxsDx on June 13, 2022, 04:04:24 PMExpand QuoteQuote from: Spaced Cadet on June 13, 2022, 03:47:10 PMExpand QuoteCan someone give me the tldr of why so many prefer the cast plates over the forged so much?[close]The arguments in favor of cast venture plates include (1) 1.5 mm taller (resulting in 53.5 mm for the standard variants), (2) less wheelbase extension with the casts - though I forget the exact figures, and (3) forged plates have a different ride quality...to some, they feel more "tinny" and rattle more underfoot. Ultimately, it is one more thing for us to split hairs about. Both forged and cast are good options. You would be fine with either, but you know how this board works (not excluding myself from the madness by any means). [close]Thanks, was not aware of the wheel base differences. I'm an idiot but wouldn't the extension of the forged base plate combined with the lower height result in a similar pop feel to the higher but shorter wheelbase cast plates? The forged would just be lighter and lower overall (but with tinny feeling too)?Idk but the forged plates are working out okay for me right now. Might just stick to them to keep myself from going further insane.
Quote from: Spaced Cadet on June 13, 2022, 03:47:10 PMExpand QuoteCan someone give me the tldr of why so many prefer the cast plates over the forged so much?[close]The arguments in favor of cast venture plates include (1) 1.5 mm taller (resulting in 53.5 mm for the standard variants), (2) less wheelbase extension with the casts - though I forget the exact figures, and (3) forged plates have a different ride quality...to some, they feel more "tinny" and rattle more underfoot. Ultimately, it is one more thing for us to split hairs about. Both forged and cast are good options. You would be fine with either, but you know how this board works (not excluding myself from the madness by any means). [close]
Quote from: iw0 on June 13, 2022, 02:38:07 PMExpand QuoteQuote from: thanksgiving on June 13, 2022, 02:27:22 PMExpand QuoteQuote from: rocklobster on June 12, 2022, 07:36:16 PMExpand QuoteQuote from: thanksgiving on June 12, 2022, 07:30:31 PMExpand Quotecast v hollows coming in fall. regular baseplate with hollow axle and kingpin. first ones will be a kader pro model.[close]Sauce?Guess there's hope for a Low in 8.25 and above if they are changing up the product lineup.[close]https://i.ibb.co/kBwMfYg/841-A3-B70-C4-D0-44-C5-A503-0774-B81-A9-FF6.jpg[close]raw & hollow? i'm sweating that final $ amount[close]If you're a truck hoarder (like I assume most of us are) you've probably already done this combination of axle and baseplate, allows Venture to pair better with most deck shapes (+14.25" and above) with the pinch and slide that we've come to love.Price wise I'm guessing $65? Yuto's latest model is around that range.
Quote from: thanksgiving on June 13, 2022, 02:27:22 PMExpand QuoteQuote from: rocklobster on June 12, 2022, 07:36:16 PMExpand QuoteQuote from: thanksgiving on June 12, 2022, 07:30:31 PMExpand Quotecast v hollows coming in fall. regular baseplate with hollow axle and kingpin. first ones will be a kader pro model.[close]Sauce?Guess there's hope for a Low in 8.25 and above if they are changing up the product lineup.[close]https://i.ibb.co/kBwMfYg/841-A3-B70-C4-D0-44-C5-A503-0774-B81-A9-FF6.jpg[close]raw & hollow? i'm sweating that final $ amount[close]
What about Rodney dropping bb’s into his baseplates! Spin weight!…
Heard a little rumor that venture might adjust where their baseplate holes are drilled to make installation easier and bring in the WB a bit. Essentially sliding them up. Not 100% sure on the validity or when it would be though.
Quote from: Paperclip20 on June 13, 2022, 08:47:29 PMExpand QuoteHeard a little rumor that venture might adjust where their baseplate holes are drilled to make installation easier and bring in the WB a bit. Essentially sliding them up. Not 100% sure on the validity or when it would be though.[close]
Heard a little rumor that venture might adjust where their baseplate holes are drilled to make installation easier and bring in the WB a bit. Essentially sliding them up. Not 100% sure on the validity or when it would be though.[close]
Can I put venture low hanger from a 5.2 on a forged baseplate from a venture 5.2 high? Will it be compatible?
Quote from: iw0 on June 13, 2022, 08:56:49 PMExpand QuoteQuote from: Paperclip20 on June 13, 2022, 08:47:29 PMExpand QuoteHeard a little rumor that venture might adjust where their baseplate holes are drilled to make installation easier and bring in the WB a bit. Essentially sliding them up. Not 100% sure on the validity or when it would be though.[close][close]Haha!I’ve taken screenshots of Kostons board, and it looks like this is what he does
Quote from: Paperclip20 on June 13, 2022, 08:47:29 PMExpand QuoteHeard a little rumor that venture might adjust where their baseplate holes are drilled to make installation easier and bring in the WB a bit. Essentially sliding them up. Not 100% sure on the validity or when it would be though.[close][close]
Quote from: Paperclip20 on June 13, 2022, 08:47:29 PMExpand QuoteHeard a little rumor that venture might adjust where their baseplate holes are drilled to make installation easier and bring in the WB a bit. Essentially sliding them up. Not 100% sure on the validity or when it would be though.[close]My biggest complaint about Venture is that the front holes in the baseplate are too far back. The hanger gets in the way so you can't use a traditional skate tool. I gotta have a separate 3/8" wrench just for the front two bolts. Pain in the ass, but that's the price you gotta pay to be <AWAKE>
I’m rich and smart
Silver tool….only the best….