New royal trucks

[LebowskisRug]

It's possible, but the metal seems to grind nothing like an Ace.

[Xen]

Does anyone else think these are made in the same place Aces are/were?  I just got a pair and the finish and bushings are VERY similar to an older pair of ace classics I have.

I don’t know aces you skated, but the ugly/cheap and deep pitted look at the Royals doesn’t look anything like Classics or AF1s. Classic’s weren’t mirror polished like af1s tho.

I’d wager the semi solid state during the Rheocasting is why they are so dimpled/pitted…or lazy/not cost effective to polish (not that you need polished trucks…but they do look nicer at retail).

[LebowskisRug]

Now that I know how to polish trucks and polished the heinous Kader raws I'll offer free polishing services to anyone who will cover shipping. Ship trucks to me, I'll ship via Shippo for $7

[Xen]

Now that I know how to polish trucks and polished the heinous Kader raws I'll offer free polishing services to anyone who will cover shipping. Ship trucks to me, I'll ship via Shippo for $7

Those kaders weren’t that bad I liked them and those raw Louie Indys and thunder raws.

[Doosh215]

Expand Quote

Expand Quote

Expand Quote

This may be a stupid question, but if I replace the bushings with Bones or Ace hard bushings will it change the height of them? I really like the Ultralights I have but the bushings are a little too soft and loose for my taste. I want them a little tighter so I think harder bushings are the right move, but I'd like to keep the feel as close to stock as possible (definitely don't want to make them higher). There's bones hards, and then there are both Ace hard standard, and Ace hard low. What do you think would be the best? And would I keep the stock washers or use the replacement ones that come with new bushings. I've never really messed with my trucks before.

[close]

I posted this above but here you go:

Ace HARD bottom is same height as Royal stock bottom (flat washer in below photo / same height as regular)
Bones HARD top (Same height as royal stock) with bones washer

This pairing doesn't change the geo that I can tell AND the bones washer on top of the bones top eats of the 1-2 threads that show using stock bushings.

ACE HARD top as noted above is TALLER but STILL works fine as the top doesn't throw off the geo (like the bottom being higher or lower)...I'd still be using it but when I got the bones hards I tried them (top and bottom but didn't like the feel); and with fucking around with different combos I just put the bones hard top on and said fuckit. You'd be fine with the ace hards top and bottom, as the hard top actually eats up the threads of the kingping as well as the bones with the top washer). If you want a pic I can swap'em and post it.

ACE HARD LOW top shows sooo many threads you'd vomit.




At 190lbs this is the best combo for me that still enables a great turn (but not crazy loose).

[close]

Awesome thank you. Yeah I have some threads showing with the stock bushings that I'm not a fan of. I was going to cut the kingpin but this seems like a much better solution.

[close]

144 Royal Ultras + ACE hards top/bottom + MoMo the kitteh

Cat seems to approve, and that's good enough for me

[LebowskisRug]

Expand Quote

Now that I know how to polish trucks and polished the heinous Kader raws I'll offer free polishing services to anyone who will cover shipping. Ship trucks to me, I'll ship via Shippo for $7

[close]

Those kaders weren’t that bad I liked them and those raw Louie Indys and thunder raws.

Ya they weren't as terrible as 95% of the Venture collabs/special editions but I love the polished/purple bushing look of the V-lights I have and it was a fun challenge. Actually super easy if you have a dremel and the right wheels.

[Xen]

Expand Quote

Expand Quote

Now that I know how to polish trucks and polished the heinous Kader raws I'll offer free polishing services to anyone who will cover shipping. Ship trucks to me, I'll ship via Shippo for $7

[close]

Those kaders weren’t that bad I liked them and those raw Louie Indys and thunder raws.

[close]

Ya they weren't as terrible as 95% of the Venture collabs/special editions but I love the polished/purple bushing look of the V-lights I have and it was a fun challenge. Actually super easy if you have a dremel and the right wheels.

Pics!

[Xen]

Don't know why I left these new Royals a few months ago. Felt good before and back on them they feel better. Front crooks feel so easy to hold.

What did the madness make you ride instead of the royals? For me it's always Thunders...then I jump right back to the royals.

[LebowskisRug]

Expand Quote

Expand Quote

Expand Quote

Now that I know how to polish trucks and polished the heinous Kader raws I'll offer free polishing services to anyone who will cover shipping. Ship trucks to me, I'll ship via Shippo for $7

[close]

Those kaders weren’t that bad I liked them and those raw Louie Indys and thunder raws.

[close]

Ya they weren't as terrible as 95% of the Venture collabs/special editions but I love the polished/purple bushing look of the V-lights I have and it was a fun challenge. Actually super easy if you have a dremel and the right wheels.

[close]

Pics!

Old vid, there's some polishing compound still on one truck hence the dots. They're not a super shiny polish like a Thunder or some V Light options- more like an Indy.

[Ok]

Expand Quote

Expand Quote

Expand Quote

Expand Quote

Now that I know how to polish trucks and polished the heinous Kader raws I'll offer free polishing services to anyone who will cover shipping. Ship trucks to me, I'll ship via Shippo for $7

[close]

Those kaders weren’t that bad I liked them and those raw Louie Indys and thunder raws.

[close]

Ya they weren't as terrible as 95% of the Venture collabs/special editions but I love the polished/purple bushing look of the V-lights I have and it was a fun challenge. Actually super easy if you have a dremel and the right wheels.

[close]

Pics!

[close]

Old vid, there's some polishing compound still on one truck hence the dots. They're not a super shiny polish like a Thunder or some V Light options- more like an Indy.

i like that.
and 2 bolts per, like a real one.
nice work

[Mick]

Damn those look good, wouldn't even know they were the raw finish originally

[LebowskisRug]

I'm temporarily in Venture-land but my house is located on Thunder island

[Xen]

Damn those look good, wouldn't even know they were the raw finish originally

I can't see the vid/pics - not sure why, I don't see the link?

I'm temporarily in Venture-land but my house is located on Thunder island

I'm tempted by these forged raw unridden v-lites (that I can't seem to sell on classifieds) that I have sitting around...

[LebowskisRug]

V lites are great- super snappy. But for whatever reason on them the rear of the board takes for fucking ever to come up and I'm not about to go down the rabbit hole of finding a new deck to pair with them when the shape I've had like 15 of in the last year or two has been great with cast for the most part.

[Xen]

V lites are great- super snappy. But for whatever reason on them the rear of the board takes for fucking ever to come up and I'm not about to go down the rabbit hole of finding a new deck to pair with them when the shape I've had like 15 of in the last year or two has been great with cast for the most part.

I'm sitting on a Primitive so the short WB and longer kicks will pair well with them.

[skateboardingenthusiast]

Yeah I’ve been on the IKP version for about a year now and I’m not thinking of changing anytime soon.
They are great all round. Don’t have to worry about the wheelbase of my deck. Just get whatever. I like that they have reduced my truck madness.

Okay, this right here is what makes me want to get a pair. Seems like standards are the way to go with these.

This could be their place in the market. “Just get whatever.”

Stuck in a hard place with your truck madness and find yourself switching back and forth between Indy and Thunder? Royals, baby.

Looking forward to these. Glad to see a nostalgic brand get an update. Good on Crailtap. Makes me wonder where Silver trucks is in all of this… it’d be dope to see them make a resurgence, too.

[notinternetfamous]

Makes me wonder where Silver trucks is in all of this… it’d be dope to see them make a resurgence, too.

all Silver needs to do is continue making their skate tool, nothing else

[moonordie]

Expand Quote

Makes me wonder where Silver trucks is in all of this… it’d be dope to see them make a resurgence, too.

[close]

all Silver needs to do is continue making their skate tool, nothing else

Probably that's what keep them in business

[PalaceButtPlug]

They are better than indy's for sure. I'm two months deep and very happy with grinds and slides

[Glutenpadre]

Anyone Else using a Indy Hanger?
I switched from 8.5 to 8.3 and didn't want to buy a new pair.
Sits in pretty snug, geometry is maybe a little off but still nice.
Occasional wheel bite but the added grind smoothness/clearance has been great for me.

[sebbo]

Anyone Else using a Indy Hanger?
I switched from 8.5 to 8.3 and didn't want to buy a new pair.
Sits in pretty snug, geometry is maybe a little off but still nice.
Occasional wheel bite but the added grind smoothness/clearance has been great for me.

a buddy is using his thunder hangers and it looks ugly af 

[LebowskisRug]

I dunno why you'd use a Thunder hanger. I had the same small nitpick that Ben D did in that its either the type of metal or shape of the baseplate but it didn't slide any better than a Thunder for me. I could hear it slide, but still felt like I had to lean back on noseslides the same

[Obijuan91]

They’re on sale at skate warehouse for 30$ with shipping. Gave up on the Indy mids and compulsively bought a pair. Now I got way to many trucks and currently can’t skate cuz of a year long neck injury first world problems.

[disgruntledMTAEmployee]

They’re on sale at skate warehouse for 30$ with shipping. Gave up on the Indy mids and compulsively bought a pair. Now I got way to many trucks and currently can’t skate cuz of a year long neck injury first world problems.

you won't regret it. indys are trash now

[RichardBarkley]

Expand Quote

They’re on sale at skate warehouse for 30$ with shipping. Gave up on the Indy mids and compulsively bought a pair. Now I got way to many trucks and currently can’t skate cuz of a year long neck injury first world problems.

[close]

you won't regret it. indys are trash now

Yeah I'm skating Thunders at the moment but Royals are the best all round truck in my opinion. Won't regret it

[Kaydubbb]

I'm thinking about picking up some royals, how do I know if I'm looking at the old ones or the new ones?

[Xen]

I'm thinking about picking up some royals, how do I know if I'm looking at the old ones or the new ones?

The old royals came with black bushings and said 'The Royal Truck Company' along the baseplate. The sticker on the hanger was also very basic/flat.


The new royals come with blue or white bushings and just say ROYAL on the baseplate (or black bushings if you stumble upon some black ones) - the NEW sticker is prismatic.


If you go for the IKP version know that Mike Mo's pro model royal truck is the OLD royal (and the IKP were black).

[Kaydubbb]

Expand Quote

I'm thinking about picking up some royals, how do I know if I'm looking at the old ones or the new ones?

[close]

The old royals came with black bushings and said 'The Royal Truck Company' along the baseplate. The sticker on the hanger was also very basic/flat.


The new royals come with blue or white bushings and just say ROYAL on the baseplate (or black bushings if you stumble upon some black ones) - the NEW sticker is prismatic.


If you go for the IKP version know that Mike Mo's pro model royal truck is the OLD royal (and the IKP were black).

Thanks for the info Xen, I know you rave about the royals, how do you find the wheelbite on them?

[Xen]

Thanks for the info Xen, I know you rave about the royals, how do you find the wheelbite on them?

Compared to riding thunder? Nonexistent.

Of course it still happens and those stock bushings are soft…wheelbite city.

94a thunder bottom/ bones hard bottom as top bushing, bones flat washer on bottom is the sweet spot for me (195lbs / 53/54mm wheels).

[Kaydubbb]

Expand Quote

Thanks for the info Xen, I know you rave about the royals, how do you find the wheelbite on them?

[close]

Compared to riding thunder? Nonexistent.

Of course it still happens and those stock bushings are soft…wheelbite city.

94a thunder bottom/ bones hard bottom as top bushing, bones flat washer on bottom is the sweet spot for me (195lbs / 53/54mm wheels).

Sounds like it will work for me then. If the bottom bushing is tall like thunders I'll probably get away with my ace hard bottom bushing I've been using with a thicker and super cupped washer.