Author Topic: Gear madness support thread  (Read 372008 times)

0 Members and 28 Guests are viewing this topic.

j....soy.....

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 20076
  • Rep: 2050
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
Re: Gear madness support thread
« Reply #1170 on: April 26, 2023, 02:29:32 PM »
After an injury?  The only real question is whether or not it’s safe to give away?

vicious cycle

  • Trade Count: (0)
  • Sr. Member
  • ****
  • Posts: 396
  • Rep: 182
Re: Gear madness support thread
« Reply #1171 on: April 26, 2023, 02:32:45 PM »
i'm sitting on 3 decks i bought while riding Indy forged.
Now that i switched to venture forged i catch myself looking for more decks that my brain says would skate better with the ventures..
I got 2 Real 8.28s.. 31.7, 14.12 WB. Pretty short tail and one is a I the other is a III.
Should i even bother setting them up with the ventures.
The other one is a Darkroom 8.25, 32, 14.25 WB. Could work better maybe..
Last one was a Polar 8.25, 31.875 14.125 WB. That one felt great with the Ventures so my madness tells me i should buy a few more of them..
I hate this shit.
You can't buy happiness but you can buy a Skateboard.

OhioGuy

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 1386
  • Rep: 4
Re: Gear madness support thread
« Reply #1172 on: April 26, 2023, 02:42:08 PM »
Expand Quote
Not sure if this is madness, but I have the urge to swap out a perfectly fine deck (after a month of use). I have this thing where I like to setup new decks to signify a change. Like new season, coming back from an injury, new approach to skateboarding, etc.

Am I being a superstitious kook? 🥹
[close]

I only like to skate spring/summer color decks during the warmer months. Gotta be a lot of light colors, lots of pastels, stuff like that. Dark boards are for skating in parking garages all winter.
Thanks for the replies. I know it’s not technically madness and I plan on giving it away. And yeah, I want something that has a different vibe. Also doesn’t hurt that I have an abundance of decks cause the sale gear thread lol.

LebowskisRug

  • Guest
Re: Gear madness support thread
« Reply #1173 on: April 26, 2023, 04:48:15 PM »
i'm sitting on 3 decks i bought while riding Indy forged.
Now that i switched to venture forged i catch myself looking for more decks that my brain says would skate better with the ventures..
I got 2 Real 8.28s.. 31.7, 14.12 WB. Pretty short tail and one is a I the other is a III.
Should i even bother setting them up with the ventures.
The other one is a Darkroom 8.25, 32, 14.25 WB. Could work better maybe..
Last one was a Polar 8.25, 31.875 14.125 WB. That one felt great with the Ventures so my madness tells me i should buy a few more of them..
I hate this shit.

You don't have to hate it. You have 2 choices:

1. Set them up and try and leave them at a local park if they don't work.
2. Try to sell them and get what you like.

Regardless I would advise not trying to mastermind wheelbases or other dimensions as much. I've skated setups that all had the same effective wheelbase but felt much different. I have no clue why I like Thunders on 14.5 more than Venture on 14.1-14.25 when they have a longer effective wheelbase. I've skated decks with the same measurements but different kick shapes and fingers of flat and had noticeably different experiences. Sometimes you gotta just ride with what works and suck it up as a loss if something you try that is similar or might be better doesn't work.

Thebird

  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 588
  • Rep: 222
Re: Gear madness support thread
« Reply #1174 on: April 26, 2023, 07:57:49 PM »
Not really madness cuz I'm not sweating it but recently tried Venture 5.6 Cast hollows again recently. First on an 8.25/14.25 Pass~Port. Was ok for a few flip tricks, decent pop, horrible manual point. Figured I'd throw them on my 8.25 AH Eagle I am running Thunders on and holy shit is it horrible. Like awful ollieing over anything except for getting up on a taller ledge. Manual point is a tad better cuz the deck is mellower. I don't think I will even try to persist on it because skating it is just simply not fun.

Interestingly I put my Thunders on the Pass~Port and liked it better than the Ventures on there before. So far I have enjoyed Thunders on basically any BBS deck 8.25-8.5 wide and 14.25-14.5WB yet I still wanna try other trucks.

Have you been able to try the cast hollows on the AWS 8.25 x 32.25 x 14.25?  That has been my favorite deck to run with those trucks.  I think the longer nose and tail work well with the Ventures.  All of my manuals feel good on this setup, and my flip tricks are higher than doing them on Thunders.

LebowskisRug

  • Guest
Re: Gear madness support thread
« Reply #1175 on: April 26, 2023, 09:46:05 PM »
I have not, no one local sells those and I typically am not one for big kicks. So far I have tried Quasi 8.25, Quasi 8.38, BBS 8.125 generic, BBS 8.25 generic, BBS 8.38 generic, DLX Blue Eagle 8.4ish x 14.25, a DLX 8.25, a DLX 8.06, and maybe something else. I think the only deck I've really enjoyed them on is the BBS 8.125/8.25

Thebird

  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 588
  • Rep: 222
Re: Gear madness support thread
« Reply #1176 on: April 27, 2023, 05:47:10 AM »
Quasi 8.25 is on deck for me.  The one with the 14.38 wb.  Never tried this shape, but I normally do not like PS.  We'll see how it goes.

art hellman

  • Trade Count: (+22)
  • SLAP Pal
  • ******
  • Posts: 7847
  • Rep: 1395
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
Re: Gear madness support thread
« Reply #1177 on: April 27, 2023, 11:44:09 AM »
I have this thing where I like to setup new decks to signify a change. Like new season, coming back from an injury, new approach to skateboarding, etc.



hardly art, hardly starving


FGO925

  • Trade Count: (0)
  • Jr. Member
  • **
  • Posts: 78
  • Rep: 20
Re: Gear madness support thread
« Reply #1178 on: April 27, 2023, 12:43:36 PM »
I’ve been on the opposite end of some of these board dimension trends. Longer boards and wheelbases. The bbs dlx 8.25/14.38 with thunders has been my go to recently, but I just finished riding this weird 8.25 heroin yankou deck with a 14.8 wheelbase and it was magic. Flip tricks were amazing, and it was super comfy on transition. I thought it was mislabeled at first but I measured and it was pretty close at 14.7

I’m 5’11 so not really tall and I don’t think my legs are oddly long, but for some reason these bigger wheelbase boards just feel perfect. Bigger nose/tails, nice fingers of flat, and the 8.25 width just works perfect for flip tricks and ledges but gives enough stability for transition.

I found an old ass anti hero deck at the mall labeled “8.25 full” with a 14.5 wheelbase - seemed to from the old/original run when dlx first introduced the full shapes. Didn’t grab it because it must have been a few years old. I ended up finding a few unity & there decks with that same shape and I believe both of those brands are from dlx as well correct?

https://www.tactics.com/there/kien-friends-825-full-shape-skateboard-deck

LebowskisRug

  • Guest
Re: Gear madness support thread
« Reply #1179 on: April 27, 2023, 01:05:55 PM »
That deck is new, shoulda grabbed it.

FGO925

  • Trade Count: (0)
  • Jr. Member
  • **
  • Posts: 78
  • Rep: 20
Re: Gear madness support thread
« Reply #1180 on: April 27, 2023, 04:09:42 PM »
Damn ur right, just checked their catalog and it’s new. Still sucks buying from mainland, might go to my local shop and see if they have it.

FGO925

  • Trade Count: (0)
  • Jr. Member
  • **
  • Posts: 78
  • Rep: 20
Re: Gear madness support thread
« Reply #1181 on: April 27, 2023, 04:11:27 PM »
Damn ur right, just checked their catalog and it’s new. Still sucks buying from mainland, might go to my local shop and see if they have it.

Mbrimson88

  • Trade Count: (+1)
  • SLAP Pal
  • ******
  • Posts: 7556
  • Rep: 1539
  • Just another skate shop guy
  • Bronze Topic Start Bronze Topic Start : Start a topic with over 1,000 replies.
Re: Gear madness support thread
« Reply #1182 on: April 27, 2023, 04:49:56 PM »
I’ve been on the opposite end of some of these board dimension trends. Longer boards and wheelbases. The bbs dlx 8.25/14.38 with thunders has been my go to recently, but I just finished riding this weird 8.25 heroin yankou deck with a 14.8 wheelbase and it was magic. Flip tricks were amazing, and it was super comfy on transition. I thought it was mislabeled at first but I measured and it was pretty close at 14.7

I’m 5’11 so not really tall and I don’t think my legs are oddly long, but for some reason these bigger wheelbase boards just feel perfect. Bigger nose/tails, nice fingers of flat, and the 8.25 width just works perfect for flip tricks and ledges but gives enough stability for transition.

I found an old ass anti hero deck at the mall labeled “8.25 full” with a 14.5 wheelbase - seemed to from the old/original run when dlx first introduced the full shapes. Didn’t grab it because it must have been a few years old. I ended up finding a few unity & there decks with that same shape and I believe both of those brands are from dlx as well correct?

https://www.tactics.com/there/kien-friends-825-full-shape-skateboard-deck


Yes, they are all under DLX, being able to use any of the same shapes, or do their own, like the long Chandler Burton board, but that is wider as well.

https://www.tactics.com/there/chandler-burton-night-garden-85-skateboard-deck/metallic-foil


I think there should be more of those 8.25 Full boards coming out from DLX as well, but with anything like that, you never know how many or when they will do more, but I think the Heroin board shape is a regular one and most likely in every drop, or every other drop from Heroin from what I have heard / seen.

At least the DLX 8.25 Full shape is pretty much the go to for an allrounder, or if you do like longer boards / wheelbases without going crazy on the overall dimensions or having the wheelbase eat into the nose or tail too much.


Another board with weird long wheelbase for it's size is the Palace 8.3 board, at a similar 14.8 or so wheelbase, that most people steer clear of, but some really like.  It is Dwindle wood and Palace is not one of the brands that is around everywhere, as well as usually being on the higher price end of the scale, but interesting to see.


To say I am biased towards BBS and DLX is an understatement, but I try to keep an open mind when helping others with products, board info, etc.

Gone since 1988.  I talk too much about skateboards.  Sorry.

vicious cycle

  • Trade Count: (0)
  • Sr. Member
  • ****
  • Posts: 396
  • Rep: 182
Re: Gear madness support thread
« Reply #1183 on: April 29, 2023, 10:04:25 AM »
Expand Quote
i'm sitting on 3 decks i bought while riding Indy forged.
Now that i switched to venture forged i catch myself looking for more decks that my brain says would skate better with the ventures..
I got 2 Real 8.28s.. 31.7, 14.12 WB. Pretty short tail and one is a I the other is a III.
Should i even bother setting them up with the ventures.
The other one is a Darkroom 8.25, 32, 14.25 WB. Could work better maybe..
Last one was a Polar 8.25, 31.875 14.125 WB. That one felt great with the Ventures so my madness tells me i should buy a few more of them..
I hate this shit.
[close]

You don't have to hate it. You have 2 choices:

1. Set them up and try and leave them at a local park if they don't work.
2. Try to sell them and get what you like.

Regardless I would advise not trying to mastermind wheelbases or other dimensions as much. I've skated setups that all had the same effective wheelbase but felt much different. I have no clue why I like Thunders on 14.5 more than Venture on 14.1-14.25 when they have a longer effective wheelbase. I've skated decks with the same measurements but different kick shapes and fingers of flat and had noticeably different experiences. Sometimes you gotta just ride with what works and suck it up as a loss if something you try that is similar or might be better doesn't work.
1st session on the 8.28 and yea.. Better than my Madness tried to tell me. I kinda like it more than the polar I had before. It felt a bit more tiring but all my stuff worked really well. I went with the III first. The I will be a different kind of beast I guess..
You can't buy happiness but you can buy a Skateboard.

Frank and Fred

  • Guest
Re: Gear madness support thread
« Reply #1184 on: April 29, 2023, 10:25:08 AM »
Not being able to skate and having a pile of unused shit is driving me loopy. I want to just give it all away at this point.

Roisto

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 2770
  • Rep: 486
Re: Gear madness support thread
« Reply #1185 on: April 29, 2023, 12:13:18 PM »
Not being able to skate and having a pile of unused shit is driving me loopy. I want to just give it all away at this point.

That’s the worst for me with the madness. Then I start buying more and thinking what kind of set ups I should put together to make me an awesome skater. Then I start fiddling with my gear and setting up boards and then it’s full blown madness.

I’ll try to actively avoid that situation from now on but it’s not easy as I’ve got so much stuff and not enough time to skate and I’ve also been injured a bunch in the last few years.

manysnakes

  • Guest
Re: Gear madness support thread
« Reply #1186 on: April 29, 2023, 01:59:48 PM »
I’ve been a one complete guy for a while now, but last night I was struggling to land a single kickflip and my pop felt like crap. Today I’m on call and stuck at home, so in order to induce fresh madness into my skating, I went ahead and setup a freshie with some Ventures I’ve had kicking around.

Xen

  • Trade Count: (+13)
  • SLAP Pal
  • ******
  • Posts: 9539
  • Rep: 728
  • Living in your head rent free! <3
Re: Gear madness support thread
« Reply #1187 on: April 29, 2023, 03:03:50 PM »
I’ve been a one complete guy for a while now, but last night I was struggling to land a single kickflip and my pop felt like crap. Today I’m on call and stuck at home, so in order to induce fresh madness into my skating, I went ahead and setup a freshie with some Ventures I’ve had kicking around.

This is the way.

FrenchSkater

  • Trade Count: (0)
  • Sr. Member
  • ****
  • Posts: 344
  • Rep: 54
Re: Gear madness support thread
« Reply #1188 on: April 30, 2023, 03:56:00 AM »
After riding a size 8.0 board for a long time, and high trucks, I wanted to change two months ago and I bought a baker 8.125, and thunder 148, because influenced by everyone who skates big guys trucks, but above all; I wanted to be on the medium; because I was getting tired of high trucks, too much effort and big problem in flip tricks.

Lots of trouble too, wide trucks are so hard for me.. I'm short (5.7) and short legs..

Yesterday; I went to the local shop to buy a new board, I went back to 8.0, all the other boards were too long with a large wheelbase, I took a sk8mafia with a length of 31.25 and a wheelbase of 14,1
and a friend gave me a pair of Fury trucks, the new ones that are sold in partnership with decathlon skateboarding , there are mids, and honestly.. I haven't skated so well in a long time ! A 8.0 board is so much better for my build, and the fury trucks are a really big surprise!!! Very light but controllable. Maybe because they are made of aluminium. Their wheelbase is closer to independent, so less hassle with a board wheelbase above 14..

If I could give ONE BIG piece of advice for those who have fallen into madness like me, Take a board in relation to your body size, honestly, everything is easier .. that's undeniable

LebowskisRug

  • Guest
Re: Gear madness support thread
« Reply #1189 on: April 30, 2023, 06:42:54 AM »
I'm 6 foot 3 with US size 10 shoes what board size is for me?

OhioGuy

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 1386
  • Rep: 4
Re: Gear madness support thread
« Reply #1190 on: April 30, 2023, 07:09:18 AM »
I'm 6 foot 3 with US size 10 shoes what board size is for me?
I’m the same height but my feet are 13. I like 8.5 best, but can pop higher on 8.25. I have a 9.25 and 10.34 deck too, and while they feel comfy, they’re too big for me.

Honestly, I think concave is more important than the size. My 8.25 TM deck feels bigger than some of my 8.5s cause it’s so flat lol

mynameisnotjeff

  • Trade Count: (+2)
  • SLAP Pal
  • ******
  • Posts: 5320
  • Rep: 611
Re: Gear madness support thread
« Reply #1191 on: April 30, 2023, 08:52:43 AM »
After riding a size 8.0 board for a long time, and high trucks, I wanted to change two months ago and I bought a baker 8.125, and thunder 148, because influenced by everyone who skates big guys trucks, but above all; I wanted to be on the medium; because I was getting tired of high trucks, too much effort and big problem in flip tricks.

Lots of trouble too, wide trucks are so hard for me.. I'm short (5.7) and short legs..

Yesterday; I went to the local shop to buy a new board, I went back to 8.0, all the other boards were too long with a large wheelbase, I took a sk8mafia with a length of 31.25 and a wheelbase of 14,1
and a friend gave me a pair of Fury trucks, the new ones that are sold in partnership with decathlon skateboarding , there are mids, and honestly.. I haven't skated so well in a long time ! A 8.0 board is so much better for my build, and the fury trucks are a really big surprise!!! Very light but controllable. Maybe because they are made of aluminium. Their wheelbase is closer to independent, so less hassle with a board wheelbase above 14..

If I could give ONE BIG piece of advice for those who have fallen into madness like me, Take a board in relation to your body size, honestly, everything is easier .. that's undeniable



Pushes away in an 8.38 and an 8.75 at 5'7"
Nothing I do deserves more than an iphone camera.

OhioGuy

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 1386
  • Rep: 4
Re: Gear madness support thread
« Reply #1192 on: April 30, 2023, 10:32:45 AM »
My ollies might be better on one setup cause it has sanded down Jessup versus MOB on my other one. Just easier to slide my foot, but feels like I'll slip off while cruising. This got me thinking--have any of y'all ever applied different brands of grip on a deck? I'm thinking MOB on the tail and Jessup up front for a quicker slide. So it'd be like a 25/75 split. Surely I'm not the first person to think of this lol

FrenchSkater

  • Trade Count: (0)
  • Sr. Member
  • ****
  • Posts: 344
  • Rep: 54
Re: Gear madness support thread
« Reply #1193 on: April 30, 2023, 10:40:25 AM »
Expand Quote
After riding a size 8.0 board for a long time, and high trucks, I wanted to change two months ago and I bought a baker 8.125, and thunder 148, because influenced by everyone who skates big guys trucks, but above all; I wanted to be on the medium; because I was getting tired of high trucks, too much effort and big problem in flip tricks.

Lots of trouble too, wide trucks are so hard for me.. I'm short (5.7) and short legs..

Yesterday; I went to the local shop to buy a new board, I went back to 8.0, all the other boards were too long with a large wheelbase, I took a sk8mafia with a length of 31.25 and a wheelbase of 14,1
and a friend gave me a pair of Fury trucks, the new ones that are sold in partnership with decathlon skateboarding , there are mids, and honestly.. I haven't skated so well in a long time ! A 8.0 board is so much better for my build, and the fury trucks are a really big surprise!!! Very light but controllable. Maybe because they are made of aluminium. Their wheelbase is closer to independent, so less hassle with a board wheelbase above 14..

If I could give ONE BIG piece of advice for those who have fallen into madness like me, Take a board in relation to your body size, honestly, everything is easier .. that's undeniable
[close]



Pushes away in an 8.38 and an 8.75 at 5'7"

Yes I forgot to mention that the skateboarding style also plays a role.. I do a lot of flatground.. I think that if I did ramp or big rail, and big gap, it wouldn't be the same haha

FGO925

  • Trade Count: (0)
  • Jr. Member
  • **
  • Posts: 78
  • Rep: 20
Re: Gear madness support thread
« Reply #1194 on: April 30, 2023, 10:41:51 AM »
I definitely prefer bbs/Dlx boards as well but I may have to try that palace 8.3

These longer boards just feel super comfy. I still love the smaller wheelbase huge shovel nose FA style boards, but they just aren’t as versatile. Having a huge nose and tail does make it really easy to boost flip tricks out of tail & nose slide’s.

LebowskisRug

  • Guest
Re: Gear madness support thread
« Reply #1195 on: April 30, 2023, 02:22:54 PM »
If I was boosting flip tricks out of slides or grinds I wouldn't change a thing.

Mbrimson88

  • Trade Count: (+1)
  • SLAP Pal
  • ******
  • Posts: 7556
  • Rep: 1539
  • Just another skate shop guy
  • Bronze Topic Start Bronze Topic Start : Start a topic with over 1,000 replies.
Re: Gear madness support thread
« Reply #1196 on: April 30, 2023, 06:00:13 PM »
My ollies might be better on one setup cause it has sanded down Jessup versus MOB on my other one. Just easier to slide my foot, but feels like I'll slip off while cruising. This got me thinking--have any of y'all ever applied different brands of grip on a deck? I'm thinking MOB on the tail and Jessup up front for a quicker slide. So it'd be like a 25/75 split. Surely I'm not the first person to think of this lol


I can't remember who but someone used to do that.  Extra tough grit on the tail, but didn't matter on the rest of the board, especially with all their weird and wonderful grip jobs, where they often used a lot of coloured and different grip to make a piece of art every time.

Some of the other custom grip jobs people have done left me wanting to change out the grip close to the bolts on the tail, as they had spray art grip just in the pocket where I like to keep my foot.  Sure put the square of sprayed grip art up past the back bolts, but not at all into the tail please?!?






Gone since 1988.  I talk too much about skateboards.  Sorry.

Tom Pearl

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 1065
  • Rep: 208
Re: Gear madness support thread
« Reply #1197 on: May 01, 2023, 05:56:12 PM »
Anybody ever fuck with moose blanks?


if so could you offer details about shape and overall durability, shit like that
« Last Edit: May 01, 2023, 06:10:53 PM by Tom Pearl »

Sedition

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 2486
  • Rep: 1504
  • Fuck the revoltion. Bring on the apocalypse.
  • Bronze Topic Start Bronze Topic Start : Start a topic with over 1,000 replies.
Re: Gear madness support thread
« Reply #1198 on: May 01, 2023, 06:18:57 PM »
Rhetorical Question: Has this thread helped mitigate your madness…or made it worse? 

My answer? “Yes.”
"When life goes bad, make it go wronger"  -Gerwer

LebowskisRug

  • Guest
Re: Gear madness support thread
« Reply #1199 on: May 01, 2023, 07:11:05 PM »
Better than the truck threads do