Big Boards 9"+( I wanna hear big boys talk about their big boards)

[animalflesh]

Nice grip (:

[Roisto]

Crosspost from the egg thread:



Xmas almost came early this year! Everything new except risers & spacers.

Heroin Symmetrical Egg 9.75”
Ace Classic 66s
SKF Skate Bearings
Shorty’s 1”
Pig Rails
Spitfire 97A F4 Conical Full 56mm
Jessup UltraGrip 10”
Real Universal Wood Risers
Random spacers from the local shop

Can’t wait for the weather to improve a bit so I can go skate some curbs with this eggy boi!

[NORTHBYMIDWEST]

Sick setup! I want one of those symmetrical eggs bad, I think they look a lot better without the wheel wells.

[beandemon]

Time for a freshii


Scram Cinex(aka Lindloff pools now)
Fresh potatoes in 53/99
Forged hollow 159s
Quantum Bearing Science isotopes
Mob
Down to my last 3 of the old graphics. Guess it’s time to stock up again.

Nice grip. Do you have problems with the small pieces moving or falling off?  I always do.

[apport]

Crosspost from the egg thread:



Xmas almost came early this year! Everything new except risers & spacers.

Heroin Symmetrical Egg 9.75”
Ace Classic 66s
SKF Skate Bearings
Shorty’s 1”
Pig Rails
Spitfire 97A F4 Conical Full 56mm
Jessup UltraGrip 10”
Real Universal Wood Risers
Random spacers from the local shop

Can’t wait for the weather to improve a bit so I can go skate some curbs with this eggy boi!

what’s the width over the truck holes?

[Plan9Customs]

Nice grip (:

Thanks.

Expand Quote

Time for a freshii


Scram Cinex(aka Lindloff pools now)
Fresh potatoes in 53/99
Forged hollow 159s
Quantum Bearing Science isotopes
Mob
Down to my last 3 of the old graphics. Guess it’s time to stock up again.

[close]

Nice grip. Do you have problems with the small pieces moving or falling off?  I always do.

Thanks. Occasionally some, if they’re really small will move but for the most part, it stays.

[Plan9Customs]

You ever see an old shape that you'd think would be cool to skate but it's not made anymore so you do it yourself? That's exactly what I did.




Black Label John Lucero Emergency Cross, reshaped. I cut down the nose making the length from 33" to about 31", and added a taper. I also redrilled the already double drilled wheelbase to 15", so here's to hoping the deck doesn't break when I step on it :v I did my best to match the original 80s/90s Santa Cruz shape, but there weren't many clear images of it.

Indy 159 standards with stock bushings

Spitfire F4 Conical Full 56mm 99a

Bones Super Reds Ceramics

Jessup Ultra + MOB Clear

Santa Cruz rails

1" hardware

Before/after:



Santa Cruz shape vs my work



The obvious difference is the taper, but I wasn't sure if the taper was steep due to the photo angle so I played it safe. Overall, not bad for having little to work with.

You did good sir.

[Ronnie Rodriguez]

Expand Quote

Nice grip (:

[close]

Thanks.

Expand Quote

Expand Quote

Time for a freshii


Scram Cinex(aka Lindloff pools now)
Fresh potatoes in 53/99
Forged hollow 159s
Quantum Bearing Science isotopes
Mob
Down to my last 3 of the old graphics. Guess it’s time to stock up again.

[close]

Nice grip. Do you have problems with the small pieces moving or falling off?  I always do.

[close]

Thanks. Occasionally some, if they’re really small will move but for the most part, it stays.

What do you use to cut it up like that? I feel like you'd blow through razor blades pretty quick.

[Plan9Customs]

Expand Quote

Expand Quote

Nice grip (:

[close]

Thanks.

Expand Quote

Expand Quote

Time for a freshii


Scram Cinex(aka Lindloff pools now)
Fresh potatoes in 53/99
Forged hollow 159s
Quantum Bearing Science isotopes
Mob
Down to my last 3 of the old graphics. Guess it’s time to stock up again.

[close]

Nice grip. Do you have problems with the small pieces moving or falling off?  I always do.

[close]

Thanks. Occasionally some, if they’re really small will move but for the most part, it stays.

[close]

What do you use to cut it up like that? I feel like you'd blow through razor blades pretty quick.

Just some cheap scissors I have in my shop for cutting sand paper. Probably $2 ikeas or something.

[Roisto]

Expand Quote

Crosspost from the egg thread:



Xmas almost came early this year! Everything new except risers & spacers.

Heroin Symmetrical Egg 9.75”
Ace Classic 66s
SKF Skate Bearings
Shorty’s 1”
Pig Rails
Spitfire 97A F4 Conical Full 56mm
Jessup UltraGrip 10”
Real Universal Wood Risers
Random spacers from the local shop

Can’t wait for the weather to improve a bit so I can go skate some curbs with this eggy boi!

[close]

what’s the width over the truck holes?

9.625” - 9,375“. Pretty much bang on 9.5” where the axle sits on the Ace Classics. Ace AF1 77s would probably work well too but I wanted the widest classics to test them out as I think I still slightly prefer classics over the AF1s.

[GBLange]

Expand Quote

Expand Quote

Crosspost from the egg thread:



Xmas almost came early this year! Everything new except risers & spacers.

Heroin Symmetrical Egg 9.75”
Ace Classic 66s
SKF Skate Bearings
Shorty’s 1”
Pig Rails
Spitfire 97A F4 Conical Full 56mm
Jessup UltraGrip 10”
Real Universal Wood Risers
Random spacers from the local shop

Can’t wait for the weather to improve a bit so I can go skate some curbs with this eggy boi!

[close]

what’s the width over the truck holes?

[close]

9.625” - 9,375“. Pretty much bang on 9.5” where the axle sits on the Ace Classics. Ace AF1 77s would probably work well too but I wanted the widest classics to test them out as I think I still slightly prefer classics over the AF1s.

i'm using the af1-77s on the 9.75" sym and also Curbkiller..

[beandemon]

Expand Quote

Nice grip (:

[close]

Thanks.

Expand Quote

Expand Quote

Time for a freshii


Scram Cinex(aka Lindloff pools now)
Fresh potatoes in 53/99
Forged hollow 159s
Quantum Bearing Science isotopes
Mob
Down to my last 3 of the old graphics. Guess it’s time to stock up again.

[close]

Nice grip. Do you have problems with the small pieces moving or falling off?  I always do.

[close]

Thanks. Occasionally some, if they’re really small will move but for the most part, it stays.

Dang, I was hoping for some secret techniques.

[disclosed]

Expand Quote

Expand Quote

Nice grip (:

[close]

Thanks.

Expand Quote

Expand Quote

Time for a freshii


Scram Cinex(aka Lindloff pools now)
Fresh potatoes in 53/99
Forged hollow 159s
Quantum Bearing Science isotopes
Mob
Down to my last 3 of the old graphics. Guess it’s time to stock up again.

[close]

Nice grip. Do you have problems with the small pieces moving or falling off?  I always do.

[close]

Thanks. Occasionally some, if they’re really small will move but for the most part, it stays.

[close]

Dang, I was hoping for some secret techniques.

can also depend on the brand. get one that sticks best. also if you wait a couple days after sticking it on its less likely to fall off/move too. gives the glue some time to dry.

[animalflesh]

My turn




Fancy Lad (from my man @Eggie Vedder )
Indy 159
Indy extra soft
1/4
56mm 99a slimeballs
Big Balls
Lil jawns
Mob

Here’s two bonus shots

[shpongle]

anybody order something from https://wouldshopskates.bigcartel.com/ ?
kind of want to get some 11' blanks and do my own shapes 

[Woodshop]

anybody order something from https://wouldshopskates.bigcartel.com/ ?
kind of want to get some 11' blanks and do my own shapes 

I feel like I have seen some somewhere on Slap, but there is also the blanks thread here - someone spaced out the letters so it doesn't really come up on searches well.


https://www.slapmagazine.com/index.php?topic=113993.0

[bombsaway86]

anybody order something from https://wouldshopskates.bigcartel.com/ ?
kind of want to get some 11' blanks and do my own shapes 

I haven’t gotten any uncuts from him, but I’ve had a few Wouldshop decks. They are very high quality.

Follow him on Instagram, he usually reposts decks that people have made with his uncuts

[Plan9Customs]

My turn




Fancy Lad (from my man @Eggie Vedder )
Indy 159
Indy extra soft
1/4
56mm 99a slimeballs
Big Balls
Lil jawns
Mob

Here’s two bonus shots

Always coming through with the rad set ups.

[oliknight]

First time on a 9.125 egg shape and the rumours are true: this is the best egg size! Such a good size for whatever you want to do!

Enjoi Jackson Pilz 9.125
Venture 6.1 hollow
Spitfire classics 54 (I think, I can’t remember)
Bones reds
Jessup grip
Indy bolts

[animalflesh]

@Plan9Customs thank u man

[apport]

Expand Quote

Expand Quote

Crosspost from the egg thread:



Xmas almost came early this year! Everything new except risers & spacers.

Heroin Symmetrical Egg 9.75”
Ace Classic 66s
SKF Skate Bearings
Shorty’s 1”
Pig Rails
Spitfire 97A F4 Conical Full 56mm
Jessup UltraGrip 10”
Real Universal Wood Risers
Random spacers from the local shop

Can’t wait for the weather to improve a bit so I can go skate some curbs with this eggy boi!

[close]

what’s the width over the truck holes?

[close]

9.625” - 9,375“. Pretty much bang on 9.5” where the axle sits on the Ace Classics. Ace AF1 77s would probably work well too but I wanted the widest classics to test them out as I think I still slightly prefer classics over the AF1s.

oh man thank you, i have been looking for something to put my ace 66 classics on for a while, this looks perfect

[qweenmess]

Been lurking through this thread trying to get more info on the Polar Dane 1 and 1992 shapes. I'm getting back into skating after a few years and I got a P9 with 149 thunder trucks and 56mm 92a Ricta Clouds. I'm not loving the shape so far, so I wanted to try 9"+ board and I'm really interested in the Dane or 92. I'm not sure which trucks I would get, I'm debating between 151 thunder or Ace 55, and I want to keep my same wheels.

I'm curious if there's anyone here who has experience riding both the Dane 1 and 92?

[j....soy.....]

Set this up with some 169’s, ditchtechs…..it’s huge but the tapers make it manageable….comes in a deerman graphic too….10” wide…..it’s no joke…

[FatGuy92]

Finally got the 9.0 Enjoi and man this thing is a beast



I have it setup with 151 Team Hollows and 52mm conicals (worn down to around 50mm). Might put 159 titaniums on instead, but I’m coming back from an ankle injury and want a longer WB for stability. Gonna take it to the curbs tomorrow.

[cucktard]

Set this up with some 169’s, ditchtechs…..it’s huge but the tapers make it manageable….comes in a deerman graphic too….10” wide…..it’s no joke…

I’d grab one if I was back in Canada. Ace Classic 66s and ditchtecks or 97a Spits.

[Woodshop]

This shape always struck me as a good all rounder.

I guess it is much the same as the Grosso shape, slightly squared off nose, squared off tail with a bit of a curve through the front foot area and tapering a bit down towards the tail.


theheatedwheel
• NOW UP ON THE SITE • The Jacklyn Limited Pack • New Custom Shaped Deck Plus Signed & Numbered Print by Neil Blender • Deck - 9.5x32 15.5 WB • Print - 8x10 on Textured Fine Art Paper • Swipe Left • theheatedwheel.com •

[yourbreakfsat]

Black Label Curb Nerd 9.63" x 32" with 14-14.5" adjustable wheelbase (set at 14")
Lurpiv IKP 159
Dogtown Rallys 54mm 99a
Bones Super Swiss 6
Jessup Ultra
7/8" hardware

Been a while since I've skated a deck that's 32" long, which is definitely something I'm still getting used to.

[big_kev_215]

been wanting to set up a big boy board, do shops sell grip fatter than 9" or am i doomed to have the sides exposed?

Mob sells 11 inch wide grip (I’m sure others do too) that covers all of these shapes.

[radcunt]

anybody order something from https://wouldshopskates.bigcartel.com/ ?
kind of want to get some 11' blanks and do my own shapes 

Sucks they don’t ship boxes of 10 to Australia

[beandemon]

Asking here because big boards often have longer wheel bases: Any tips on small, steep banks or transition, specifically clearing the nose or tail on re-entry. Not really looking to pop out.