Big Boards 9"+( I wanna hear big boys talk about their big boards)

[fakiefs180]

Expand Quote

https://www.skatedeluxe.com/de/chocolate-alvarez-sapo-one-off-9-skateboard-deck-multi_p150466?page=2&cPath=42&brand_id=58,71

Chocolate Love Seat.
How well would Indy 159 fit on that shape? I am not a fan of the magic carpet ride, I like it more flush.

[close]

I set it up with 151s and like it but it's 8.5 over the bolts.

Thank you mate. I already wanted some 149s for the collection, maybe that's the deck for them.

[NORTHBYMIDWEST]

Anyone know how often 35th Ave restocks those 10” popsicle shop decks?

[Plan9Customs]

Black Label Curb Nerd 9.63" x 32" with 14-14.5" adjustable wheelbase (set at 14")
Lurpiv IKP 159
Dogtown Rallys 54mm 99a
Bones Super Swiss 6
Jessup Ultra
7/8" hardware

Been a while since I've skated a deck that's 32" long, which is definitely something I'm still getting used to.

Drooling over here. I think I need one especially since it has a 14” wb.

[beandemon]

Expand Quote

Asking here because big boards often have longer wheel bases: Any tips on small, steep banks or transition, specifically clearing the nose or tail on re-entry. Not really looking to pop out.

[close]

Don’t ride front pocket, you have to kinda skate in the back seat a little bit and keep your foot pointed more forward for more control

Thanks, that makes sense. I’ve been thinking about it, and I’m trying to think of it like an inverted slappy gotta umshalla up there, stands to reason you gotta umshalla off.

[Woodshop]

Anyone know how often 35th Ave restocks those 10” popsicle shop decks?

@144p is the man for that.

[Gray Imp Sausage Metal]

Expand Quote

Black Label Curb Nerd 9.63" x 32" with 14-14.5" adjustable wheelbase (set at 14")
Lurpiv IKP 159
Dogtown Rallys 54mm 99a
Bones Super Swiss 6
Jessup Ultra
7/8" hardware

Been a while since I've skated a deck that's 32" long, which is definitely something I'm still getting used to.

[close]

Drooling over here. I think I need one especially since it has a 14” wb.

[144p]

Expand Quote

Anyone know how often 35th Ave restocks those 10” popsicle shop decks?

[close]

@144p is the man for that.

Unfortunately the woodshop has no plans in producing more until they have access to more wider veneers. I was told that for some reason there is a shortage of them over a certain size, I don’t have the specifics of how or why but essentially they have no plans to make more. This is second hand info so it could be wrong but it’s all I got.
Sorry about that.

[NORTHBYMIDWEST]

Expand Quote

Expand Quote

Anyone know how often 35th Ave restocks those 10” popsicle shop decks?

[close]

@144p is the man for that.

[close]

Unfortunately the woodshop has no plans in producing more until they have access to more wider veneers. I was told that for some reason there is a shortage of them over a certain size, I don’t have the specifics of how or why but essentially they have no plans to make more. This is second hand info so it could be wrong but it’s all I got.
Sorry about that.

Bummer! Thanks for the info tho!

[bombsaway86]

Expand Quote

Expand Quote

Expand Quote

Anyone know how often 35th Ave restocks those 10” popsicle shop decks?

[close]

@144p is the man for that.

[close]

Unfortunately the woodshop has no plans in producing more until they have access to more wider veneers. I was told that for some reason there is a shortage of them over a certain size, I don’t have the specifics of how or why but essentially they have no plans to make more. This is second hand info so it could be wrong but it’s all I got.
Sorry about that.

[close]

Bummer! Thanks for the info tho!

I know a dude who gets custom 10” pops from @pretty_rad on Instagram. No idea what they cost, but it’s an option if you really want one

[NORTHBYMIDWEST]

Expand Quote

Expand Quote

Expand Quote

Expand Quote

Anyone know how often 35th Ave restocks those 10” popsicle shop decks?

[close]

@144p is the man for that.

[close]

Unfortunately the woodshop has no plans in producing more until they have access to more wider veneers. I was told that for some reason there is a shortage of them over a certain size, I don’t have the specifics of how or why but essentially they have no plans to make more. This is second hand info so it could be wrong but it’s all I got.
Sorry about that.

[close]

Bummer! Thanks for the info tho!

[close]

I know a dude who gets custom 10” pops from @pretty_rad on Instagram. No idea what they cost, but it’s an option if you really want one

I’ll check them out, thanks!

[Woodshop]

Expand Quote

Expand Quote

Anyone know how often 35th Ave restocks those 10” popsicle shop decks?

[close]

@144p is the man for that.

[close]

Unfortunately the woodshop has no plans in producing more until they have access to more wider veneers. I was told that for some reason there is a shortage of them over a certain size, I don’t have the specifics of how or why but essentially they have no plans to make more. This is second hand info so it could be wrong but it’s all I got.
Sorry about that.

Yeah I heard the same thing.

Something like "everything is pre cut and they will not cut anything bigger than whatever size they go with for the foreseeable future".

Stock up on whatever you can get your hands on or get something smaller are the only two options for anyone in that situation.

[TastyBurrito]

Looks like Berle painted and FA’d a Winkowski deck. Would be awesome if FA made a shaped deck for him.

[yourbreakfsat]

Looks like Berle painted and FA’d a Winkowski deck. Would be awesome if FA made a shaped deck for him.

As much as I want one, shaped decks do not fit FA's style.

[TastyBurrito]

Expand Quote

Looks like Berle painted and FA’d a Winkowski deck. Would be awesome if FA made a shaped deck for him.

[close]

As much as I want one, shaped decks do not fit FA's style.

You're right. Guess it's why Berle does this to other brands' shaped stuff.

Oddly enough, I can see it for Hockey.

[YBOS]

If FA or Hockey made a shaped board I feel like it would be Welcome all over again. I don't know if I could handle that

[qweenmess]

Picked up a Dane 1 with wheel wells, I'm so excited to set this up! Just waiting on grip and trucks.

Does anyone have any experience riding a board this size with thunder 149 (or similarly sized) trucks? That's what I have and I think my grip is gna get here before my trucks do.

[Sonny Paluso]

Just got a Beach Bummer today. Reminds me a lot of my old Slave War Pig, which I loved. For anyone interested on dimensions (measured flat with cloth tape measure) ...

T: 6.75
N: 6.0
WB: 14.6
Front truck width at middle of bolt pattern: 9.5ish
Rear truck " "... " : 9.0ish

[Mbrimson88]

Just got a Beach Bummer today. Reminds me a lot of my old Slave War Pig, which I loved. For anyone interested on dimensions (measured flat with cloth tape measure) ...

T: 6.75
N: 6.0
WB: 14.6
Front truck width at middle of bolt pattern: 9.5ish
Rear truck " "... " : 9.0ish

Thanks!

That is good info on the dimensions.

I copied your post to the DLX thread as well.

[Bror]

Looks like Berle painted and FA’d a Winkowski deck. Would be awesome if FA made a shaped deck for him.

Anyone rode the winkowski shape?

I just started riding the orange eagle shape and should probably stay with that forever but Id love one as a cruiser. Nothing better than looking down on a shaped deck.

[cky enthusiast]

quasi 9” football/90’s shape. real short. super fun.

indy’s and spit 58’s on 3plys. it pops

[Ronnie Rodriguez]

Picked up a Dane 1 with wheel wells, I'm so excited to set this up! Just waiting on grip and trucks.

Does anyone have any experience riding a board this size with thunder 149 (or similarly sized) trucks? That's what I have and I think my grip is gna get here before my trucks do.

Skated mine with 149 Indys with a couple extra washers after I slipped an axle on my 159s. Honestly preferred it. As Long as you have some wider wheels you should be good to go.

[TastyBurrito]

Expand Quote

Looks like Berle painted and FA’d a Winkowski deck. Would be awesome if FA made a shaped deck for him.

[close]

Anyone rode the winkowski shape?

I just started riding the orange eagle shape and should probably stay with that forever but Id love one as a cruiser. Nothing better than looking down on a shaped deck.

I'm on a Winkowski right now. Personally I enjoy it, mostly since I just carve pools.

I want to try the street Winkowski (slightly skinnier and less taper) and throw some small wheels on it for flipping and curb tricks.

[white guy in a durag]

Expand Quote

Looks like Berle painted and FA’d a Winkowski deck. Would be awesome if FA made a shaped deck for him.

[close]

Anyone rode the winkowski shape?

I just started riding the orange eagle shape and should probably stay with that forever but Id love one as a cruiser. Nothing better than looking down on a shaped deck.

I had the Evisen shor west deck which, as far as I can tell, is a copy of the fish tail winkowski shape. Very good shape, surprisingly easy to skate and I actually have it one some juices right now for cruising.

[qweenmess]

Expand Quote

Picked up a Dane 1 with wheel wells, I'm so excited to set this up! Just waiting on grip and trucks.

Does anyone have any experience riding a board this size with thunder 149 (or similarly sized) trucks? That's what I have and I think my grip is gna get here before my trucks do.

[close]

Skated mine with 149 Indys with a couple extra washers after I slipped an axle on my 159s. Honestly preferred it. As Long as you have some wider wheels you should be good to go.

I have 56mm ricta clouds, you think those will be alright ? Also where did you put the washers?

[Ronnie Rodriguez]

Expand Quote

Expand Quote

Picked up a Dane 1 with wheel wells, I'm so excited to set this up! Just waiting on grip and trucks.

Does anyone have any experience riding a board this size with thunder 149 (or similarly sized) trucks? That's what I have and I think my grip is gna get here before my trucks do.

[close]

Skated mine with 149 Indys with a couple extra washers after I slipped an axle on my 159s. Honestly preferred it. As Long as you have some wider wheels you should be good to go.

[close]

I have 56mm ricta clouds, you think those will be alright ? Also where did you put the washers?

For sure. You can do 2 washers inside the wheel and one between the wheel and the nut, or even all 3 inside. It'll also keep the nuts relatively flush with the ends of your axles to keep them from getting messed up from landing primo or whatever.

[Sonny Paluso]

Revisiting my Primitive Villani 10.0 that I skated for a bit, then put on ice. It's essentially symmetrical and I have been skating it as such. N:7.1 T:7.1 WB:14.5. Made some wheel wells to accommodate bigger wheels.

Indy TI 169
Slimeball 60mmx44mm 97a (not sluggish at skatepark,which was a concern as my 95a sucked on smooth concrete.
Bronson ceramics
1/8 Modus risers

[Woodshop]

.

I don't recall seeing this Passport "Spade" shaped deck before, but I probably don't pay enough attention most of the time either.


https://ocd-skateshop.myshopify.com/products/pass-port-singles-take-care-9-125-skateboard-deck


PASS~PORT - SINGLES TAKE CARE 9.125" SKATEBOARD DECK

WIDTH
9.125
LENGTH
31.7
WHEEL BASE
14.5





Maybe a better set of pics here from the Skate Deluxe listing:


https://www.skatedeluxe.com/en/passport-singles-take-care-9-125-skateboard-deck-multi_p156552

width: 9.125"
length: 31.375"
wheelbase: 14.375"
nose: 6.375"
tail: 6.75"

[qweenmess]

Dane 1 finally set up!

Ace 55 Classic
Ricta Clouds 56mm 92a

Haven't gotten to ride it very long but it feels great, though I might get harder wheels (I was looking at the Snot 58mm 98a).

I also read that you shouldn't tighten Ace trucks at first but I was getting some serious wheel bite with hardly any pressure so i had to tighten it a bit. It still feels pretty loose but it's fun and I'm gna take some time to adjust to it.

Edit: for reference, I'm 6'2" and prob b/w 200-220 lbs (I don't weigh myself so that's a rough estimate)

[144p]

Been a while since I posted a setup.
First day on this one
Black Label Curb nerd 9.63 x 32 14/14.5 wb
Indy 159 hollow w/krux kingpin
Spitfire f4 radial full 99a 56mm
Quantum isotopes
Rad railz wide
Jessup
Bender Allen
Dunks

[Plan9Customs]

Been a while since I posted a setup.
First day on this one
Black Label Curb nerd 9.63 x 32 14/14.5 wb
Indy 159 hollow w/krux kingpin
Spitfire f4 radial full 99a 56mm
Quantum isotopes
Rad railz wide
Jessup
Bender Allen
Dunks

Rad set up. Every time I see these I keep getting closer to buying one. BTW, do you guys have any of the 9” shovel (35th)shop decks or are they no longer around?