Author Topic: Big Boards 9"+( I wanna hear big boys talk about their big boards)  (Read 762508 times)

0 Members and 3 Guests are viewing this topic.

Plan9Customs

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 2357
  • Rep: 1178
Re: Big Boards 9"+( I wanna hear big boys talk about their big boards)
« Reply #4560 on: April 09, 2022, 11:01:52 PM »
Expand Quote
Expand Quote
Nice grip (:
[close]
Thanks.
Expand Quote
Expand Quote
Time for a freshii


Scram Cinex(aka Lindloff pools now)
Fresh potatoes in 53/99
Forged hollow 159s
Quantum Bearing Science isotopes
Mob
Down to my last 3 of the old graphics. Guess it’s time to stock up again.
[close]

Nice grip. Do you have problems with the small pieces moving or falling off?  I always do.
[close]
Thanks. Occasionally some, if they’re really small will move but for the most part, it stays.
[close]

What do you use to cut it up like that? I feel like you'd blow through razor blades pretty quick.
Just some cheap scissors I have in my shop for cutting sand paper. Probably $2 ikeas or something.

Roisto

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 2773
  • Rep: 486
Re: Big Boards 9"+( I wanna hear big boys talk about their big boards)
« Reply #4561 on: April 10, 2022, 12:02:37 AM »
Expand Quote
Crosspost from the egg thread:



Xmas almost came early this year! Everything new except risers & spacers.

Heroin Symmetrical Egg 9.75”
Ace Classic 66s
SKF Skate Bearings
Shorty’s 1”
Pig Rails
Spitfire 97A F4 Conical Full 56mm
Jessup UltraGrip 10”
Real Universal Wood Risers
Random spacers from the local shop

Can’t wait for the weather to improve a bit so I can go skate some curbs with this eggy boi!
[close]
what’s the width over the truck holes?

9.625” - 9,375“. Pretty much bang on 9.5” where the axle sits on the Ace Classics. Ace AF1 77s would probably work well too but I wanted the widest classics to test them out as I think I still slightly prefer classics over the AF1s.

GBLange

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 1097
  • Rep: 306
Re: Big Boards 9"+( I wanna hear big boys talk about their big boards)
« Reply #4562 on: April 10, 2022, 12:43:53 AM »
Expand Quote
Expand Quote
Crosspost from the egg thread:



Xmas almost came early this year! Everything new except risers & spacers.

Heroin Symmetrical Egg 9.75”
Ace Classic 66s
SKF Skate Bearings
Shorty’s 1”
Pig Rails
Spitfire 97A F4 Conical Full 56mm
Jessup UltraGrip 10”
Real Universal Wood Risers
Random spacers from the local shop

Can’t wait for the weather to improve a bit so I can go skate some curbs with this eggy boi!
[close]
what’s the width over the truck holes?
[close]

9.625” - 9,375“. Pretty much bang on 9.5” where the axle sits on the Ace Classics. Ace AF1 77s would probably work well too but I wanted the widest classics to test them out as I think I still slightly prefer classics over the AF1s.

i'm using the af1-77s on the 9.75" sym and also Curbkiller..

beandemon

  • Trade Count: (+1)
  • Hero Member
  • *****
  • Posts: 544
  • Rep: 191
Re: Big Boards 9"+( I wanna hear big boys talk about their big boards)
« Reply #4563 on: April 10, 2022, 05:40:12 AM »
Expand Quote
Nice grip (:
[close]
Thanks.
Expand Quote
Expand Quote
Time for a freshii


Scram Cinex(aka Lindloff pools now)
Fresh potatoes in 53/99
Forged hollow 159s
Quantum Bearing Science isotopes
Mob
Down to my last 3 of the old graphics. Guess it’s time to stock up again.
[close]

Nice grip. Do you have problems with the small pieces moving or falling off?  I always do.
[close]
Thanks. Occasionally some, if they’re really small will move but for the most part, it stays.
Dang, I was hoping for some secret techniques.

disclosed

  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 534
  • Rep: 242
Re: Big Boards 9"+( I wanna hear big boys talk about their big boards)
« Reply #4564 on: April 10, 2022, 07:29:50 AM »
Expand Quote
Expand Quote
Nice grip (:
[close]
Thanks.
Expand Quote
Expand Quote
Time for a freshii


Scram Cinex(aka Lindloff pools now)
Fresh potatoes in 53/99
Forged hollow 159s
Quantum Bearing Science isotopes
Mob
Down to my last 3 of the old graphics. Guess it’s time to stock up again.
[close]

Nice grip. Do you have problems with the small pieces moving or falling off?  I always do.
[close]
Thanks. Occasionally some, if they’re really small will move but for the most part, it stays.
[close]
Dang, I was hoping for some secret techniques.

can also depend on the brand. get one that sticks best. also if you wait a couple days after sticking it on its less likely to fall off/move too. gives the glue some time to dry.


animalflesh

  • Guest
Re: Big Boards 9"+( I wanna hear big boys talk about their big boards)
« Reply #4565 on: April 10, 2022, 03:55:29 PM »
My turn




Fancy Lad (from my man @Eggie Vedder )
Indy 159
Indy extra soft
1/4
56mm 99a slimeballs
Big Balls
Lil jawns
Mob

Here’s two bonus shots




shpongle

  • Trade Count: (+2)
  • Sr. Member
  • ****
  • Posts: 426
  • Rep: 217
  • love everyOne and tell the truth
Re: Big Boards 9"+( I wanna hear big boys talk about their big boards)
« Reply #4566 on: April 10, 2022, 04:44:53 PM »
anybody order something from https://wouldshopskates.bigcartel.com/ ?
kind of want to get some 11' blanks and do my own shapes  ;D

Woodshop

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 1693
  • Rep: 340
  • Just deck / woodshop info
  • Bronze Topic Start Bronze Topic Start : Start a topic with over 1,000 replies.
Re: Big Boards 9"+( I wanna hear big boys talk about their big boards)
« Reply #4567 on: April 10, 2022, 05:13:04 PM »
anybody order something from https://wouldshopskates.bigcartel.com/ ?
kind of want to get some 11' blanks and do my own shapes  ;D


I feel like I have seen some somewhere on Slap, but there is also the blanks thread here - someone spaced out the letters so it doesn't really come up on searches well.


https://www.slapmagazine.com/index.php?topic=113993.0


bombsaway86

  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 501
  • Rep: 238
Re: Big Boards 9"+( I wanna hear big boys talk about their big boards)
« Reply #4568 on: April 10, 2022, 09:08:31 PM »
anybody order something from https://wouldshopskates.bigcartel.com/ ?
kind of want to get some 11' blanks and do my own shapes  ;D

I haven’t gotten any uncuts from him, but I’ve had a few Wouldshop decks. They are very high quality.

Follow him on Instagram, he usually reposts decks that people have made with his uncuts
Rock over London, rock on Chicago

Plan9Customs

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 2357
  • Rep: 1178
Re: Big Boards 9"+( I wanna hear big boys talk about their big boards)
« Reply #4569 on: April 11, 2022, 06:24:30 PM »
My turn




Fancy Lad (from my man @Eggie Vedder )
Indy 159
Indy extra soft
1/4
56mm 99a slimeballs
Big Balls
Lil jawns
Mob

Here’s two bonus shots



Always coming through with the rad set ups.

oliknight

  • Guest
Re: Big Boards 9"+( I wanna hear big boys talk about their big boards)
« Reply #4570 on: April 12, 2022, 12:11:14 AM »


First time on a 9.125 egg shape and the rumours are true: this is the best egg size! Such a good size for whatever you want to do!

Enjoi Jackson Pilz 9.125
Venture 6.1 hollow
Spitfire classics 54 (I think, I can’t remember)
Bones reds
Jessup grip
Indy bolts

animalflesh

  • Guest
Re: Big Boards 9"+( I wanna hear big boys talk about their big boards)
« Reply #4571 on: April 13, 2022, 02:07:58 PM »
@Plan9Customs thank u man

apport

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 1309
  • Rep: 433
Re: Big Boards 9"+( I wanna hear big boys talk about their big boards)
« Reply #4572 on: April 14, 2022, 08:10:52 PM »
Expand Quote
Expand Quote
Crosspost from the egg thread:



Xmas almost came early this year! Everything new except risers & spacers.

Heroin Symmetrical Egg 9.75”
Ace Classic 66s
SKF Skate Bearings
Shorty’s 1”
Pig Rails
Spitfire 97A F4 Conical Full 56mm
Jessup UltraGrip 10”
Real Universal Wood Risers
Random spacers from the local shop

Can’t wait for the weather to improve a bit so I can go skate some curbs with this eggy boi!
[close]
what’s the width over the truck holes?
[close]

9.625” - 9,375“. Pretty much bang on 9.5” where the axle sits on the Ace Classics. Ace AF1 77s would probably work well too but I wanted the widest classics to test them out as I think I still slightly prefer classics over the AF1s.
oh man thank you, i have been looking for something to put my ace 66 classics on for a while, this looks perfect

qweenmess

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 22
  • Rep: 18
Re: Big Boards 9"+( I wanna hear big boys talk about their big boards)
« Reply #4573 on: April 15, 2022, 05:14:55 PM »
Been lurking through this thread trying to get more info on the Polar Dane 1 and 1992 shapes. I'm getting back into skating after a few years and I got a P9 with 149 thunder trucks and 56mm 92a Ricta Clouds. I'm not loving the shape so far, so I wanted to try 9"+ board and I'm really interested in the Dane or 92. I'm not sure which trucks I would get, I'm debating between 151 thunder or Ace 55, and I want to keep my same wheels.

I'm curious if there's anyone here who has experience riding both the Dane 1 and 92?

j....soy.....

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 20098
  • Rep: 2054
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
Re: Big Boards 9"+( I wanna hear big boys talk about their big boards)
« Reply #4574 on: April 15, 2022, 06:48:53 PM »
Set this up with some 169’s, ditchtechs…..it’s huge but the tapers make it manageable….comes in a deerman graphic too….10” wide…..it’s no joke…


FatGuy92

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 1754
  • Rep: 677
Re: Big Boards 9"+( I wanna hear big boys talk about their big boards)
« Reply #4575 on: April 15, 2022, 10:05:56 PM »
Finally got the 9.0 Enjoi and man this thing is a beast



I have it setup with 151 Team Hollows and 52mm conicals (worn down to around 50mm). Might put 159 titaniums on instead, but I’m coming back from an ankle injury and want a longer WB for stability. Gonna take it to the curbs tomorrow.

Sloppy Krooks

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 3333
  • Rep: -166
Re: Big Boards 9"+( I wanna hear big boys talk about their big boards)
« Reply #4576 on: April 16, 2022, 01:15:15 AM »
Set this up with some 169’s, ditchtechs…..it’s huge but the tapers make it manageable….comes in a deerman graphic too….10” wide…..it’s no joke…



I’d grab one if I was back in Canada. Ace Classic 66s and ditchtecks or 97a Spits.
I’m trying to be every mom’s favorite skater’-&&

Duane's the type of guy to ask to see your junk then go to school and tell everyone you're gay. - Uncle Flea


Woodshop

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 1693
  • Rep: 340
  • Just deck / woodshop info
  • Bronze Topic Start Bronze Topic Start : Start a topic with over 1,000 replies.
Re: Big Boards 9"+( I wanna hear big boys talk about their big boards)
« Reply #4577 on: April 16, 2022, 04:01:44 AM »

This shape always struck me as a good all rounder.

I guess it is much the same as the Grosso shape, slightly squared off nose, squared off tail with a bit of a curve through the front foot area and tapering a bit down towards the tail.


theheatedwheel
• NOW UP ON THE SITE • The Jacklyn Limited Pack • New Custom Shaped Deck Plus Signed & Numbered Print by Neil Blender • Deck - 9.5x32 15.5 WB • Print - 8x10 on Textured Fine Art Paper • Swipe Left • theheatedwheel.com •





yourbreakfsat

  • Trade Count: (+1)
  • SLAP Pal
  • ******
  • Posts: 1635
  • Rep: 853
  • Bronze Topic Start Bronze Topic Start : Start a topic with over 1,000 replies.
Re: Big Boards 9"+( I wanna hear big boys talk about their big boards)
« Reply #4578 on: April 17, 2022, 10:38:33 AM »



Black Label Curb Nerd 9.63" x 32" with 14-14.5" adjustable wheelbase (set at 14")
Lurpiv IKP 159
Dogtown Rallys 54mm 99a
Bones Super Swiss 6
Jessup Ultra
7/8" hardware

Been a while since I've skated a deck that's 32" long, which is definitely something I'm still getting used to.

big_kev_215

  • Trade Count: (+17)
  • SLAP Pal
  • ******
  • Posts: 1856
  • Rep: 1039
Re: Big Boards 9"+( I wanna hear big boys talk about their big boards)
« Reply #4579 on: April 18, 2022, 12:22:13 PM »
been wanting to set up a big boy board, do shops sell grip fatter than 9" or am i doomed to have the sides exposed?

Mob sells 11 inch wide grip (I’m sure others do too) that covers all of these shapes.

radcunt

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 4694
  • Rep: 757
    • FARTPISS DOGCUM avatar image
Re: Big Boards 9"+( I wanna hear big boys talk about their big boards)
« Reply #4580 on: April 18, 2022, 04:13:34 PM »
anybody order something from https://wouldshopskates.bigcartel.com/ ?
kind of want to get some 11' blanks and do my own shapes  ;D

Sucks they don’t ship boxes of 10 to Australia

beandemon

  • Trade Count: (+1)
  • Hero Member
  • *****
  • Posts: 544
  • Rep: 191
Re: Big Boards 9"+( I wanna hear big boys talk about their big boards)
« Reply #4581 on: April 18, 2022, 04:48:03 PM »
Asking here because big boards often have longer wheel bases: Any tips on small, steep banks or transition, specifically clearing the nose or tail on re-entry. Not really looking to pop out.

Mbrimson88

  • Trade Count: (+1)
  • SLAP Pal
  • ******
  • Posts: 7594
  • Rep: 1553
  • Just another skate shop guy
  • Bronze Topic Start Bronze Topic Start : Start a topic with over 1,000 replies.
Re: Big Boards 9"+( I wanna hear big boys talk about their big boards)
« Reply #4582 on: April 18, 2022, 07:30:34 PM »
Expand Quote
been wanting to set up a big boy board, do shops sell grip fatter than 9" or am i doomed to have the sides exposed?
[close]

Mob sells 11 inch wide grip (I’m sure others do too) that covers all of these shapes.


Most well established brands have wider sheets.  It is just if the shop has them or not.

Grip from Mob, Jessup, Modus, Powell / Mini Logo and a heap more I have seen that I cannot remember right now.

Gone since 1988.  I talk too much about skateboards.  Sorry.

big_kev_215

  • Trade Count: (+17)
  • SLAP Pal
  • ******
  • Posts: 1856
  • Rep: 1039
Re: Big Boards 9"+( I wanna hear big boys talk about their big boards)
« Reply #4583 on: April 18, 2022, 08:24:11 PM »



Black Label Curb Nerd 9.63" x 32" with 14-14.5" adjustable wheelbase (set at 14")
Lurpiv IKP 159
Dogtown Rallys 54mm 99a
Bones Super Swiss 6
Jessup Ultra
7/8" hardware

Been a while since I've skated a deck that's 32" long, which is definitely something I'm still getting used to.

Wow that shape looks really good.  I’m about to make an unnecessary purchase. 

Gray Imp Sausage Metal

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 15953
  • Rep: 611
  • We're just 2 lo(b)s(t)ers sitting behind a screen
Re: Big Boards 9"+( I wanna hear big boys talk about their big boards)
« Reply #4584 on: April 18, 2022, 09:20:24 PM »



Black Label Curb Nerd 9.63" x 32" with 14-14.5" adjustable wheelbase (set at 14")
Lurpiv IKP 159
Dogtown Rallys 54mm 99a
Bones Super Swiss 6
Jessup Ultra
7/8" hardware

Been a while since I've skated a deck that's 32" long, which is definitely something I'm still getting used to.
I want!!!

Impish sausage is definitely gonna blow up as a euphemism this year

fakiefs180

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 2455
  • Rep: 813
    • a short part avatar image
Re: Big Boards 9"+( I wanna hear big boys talk about their big boards)
« Reply #4585 on: April 19, 2022, 09:18:27 AM »
https://www.skatedeluxe.com/de/chocolate-alvarez-sapo-one-off-9-skateboard-deck-multi_p150466?page=2&cPath=42&brand_id=58,71

Chocolate Love Seat.
How well would Indy 159 fit on that shape? I am not a fan of the magic carpet ride, I like it more flush.

animalflesh

  • Guest
Re: Big Boards 9"+( I wanna hear big boys talk about their big boards)
« Reply #4586 on: April 19, 2022, 04:14:38 PM »
Asking here because big boards often have longer wheel bases: Any tips on small, steep banks or transition, specifically clearing the nose or tail on re-entry. Not really looking to pop out.

Don’t ride front pocket, you have to kinda skate in the back seat a little bit and keep your foot pointed more forward for more control

Woodshop

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 1693
  • Rep: 340
  • Just deck / woodshop info
  • Bronze Topic Start Bronze Topic Start : Start a topic with over 1,000 replies.
Re: Big Boards 9"+( I wanna hear big boys talk about their big boards)
« Reply #4587 on: April 19, 2022, 06:42:12 PM »
Been lurking through this thread trying to get more info on the Polar Dane 1 and 1992 shapes. I'm getting back into skating after a few years and I got a P9 with 149 thunder trucks and 56mm 92a Ricta Clouds. I'm not loving the shape so far, so I wanted to try 9"+ board and I'm really interested in the Dane or 92. I'm not sure which trucks I would get, I'm debating between 151 thunder or Ace 55, and I want to keep my same wheels.

I'm curious if there's anyone here who has experience riding both the Dane 1 and 92?


For a lot of people it is more about wheelbase than the width, between comparable boards, so if you are shorter or prefer a shorter wheelbase the Dane 1 will be a fairly good board to go with, as it is very short, stubby and easy to skate for street stuff or normal park, whereas anything with a longer wheelbase will be more stable, especially if skating bigger things or going faster, or if you are taller and have your feet further apart.

I meant to add the 1992 shape is a bit more normal with a lot less taper to the back end and slightly longer 14.25 wb, still short to medium wheelbase, but it might be a bit more stable and a good go to board.  Not sure how many of them are still out there though.


Either of those trucks will work on it too, but the Ace trucks bring in the wheelbase, whereas Thunder extend the wheelbase a bit more.

Ace = short quick turns.

Thunder = might be more stable on the Dane 1 for some people.

« Last Edit: April 19, 2022, 06:51:47 PM by Woodshop »

qweenmess

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 22
  • Rep: 18
Re: Big Boards 9"+( I wanna hear big boys talk about their big boards)
« Reply #4588 on: April 19, 2022, 09:25:38 PM »
Expand Quote
Been lurking through this thread trying to get more info on the Polar Dane 1 and 1992 shapes. I'm getting back into skating after a few years and I got a P9 with 149 thunder trucks and 56mm 92a Ricta Clouds. I'm not loving the shape so far, so I wanted to try 9"+ board and I'm really interested in the Dane or 92. I'm not sure which trucks I would get, I'm debating between 151 thunder or Ace 55, and I want to keep my same wheels.

I'm curious if there's anyone here who has experience riding both the Dane 1 and 92?
[close]


For a lot of people it is more about wheelbase than the width, between comparable boards, so if you are shorter or prefer a shorter wheelbase the Dane 1 will be a fairly good board to go with, as it is very short, stubby and easy to skate for street stuff or normal park, whereas anything with a longer wheelbase will be more stable, especially if skating bigger things or going faster, or if you are taller and have your feet further apart.

I meant to add the 1992 shape is a bit more normal with a lot less taper to the back end and slightly longer 14.25 wb, still short to medium wheelbase, but it might be a bit more stable and a good go to board.  Not sure how many of them are still out there though.


Either of those trucks will work on it too, but the Ace trucks bring in the wheelbase, whereas Thunder extend the wheelbase a bit more.

Ace = short quick turns.

Thunder = might be more stable on the Dane 1 for some people.

I'm actually 6"2', but I ended up pulling the trigger on the Dane 1 with Ace Classic 55s. I wanted to go with a setup that was pretty different from what I've ridden in the past, and I can't wait for it to get here. I figured if I do want to extend the wheelbase I can go back to thunders but I'm excited to try something new.

Thanks for the advice!

Painted Baby

  • Trade Count: (+1)
  • SLAP Pal
  • ******
  • Posts: 5953
  • Rep: 1835
  • They're trying to build a prison
Re: Big Boards 9"+( I wanna hear big boys talk about their big boards)
« Reply #4589 on: April 20, 2022, 02:56:00 AM »
https://www.skatedeluxe.com/de/chocolate-alvarez-sapo-one-off-9-skateboard-deck-multi_p150466?page=2&cPath=42&brand_id=58,71

Chocolate Love Seat.
How well would Indy 159 fit on that shape? I am not a fan of the magic carpet ride, I like it more flush.
I set it up with 151s and like it but it's 8.5 over the bolts.