The Set-up Thread

[Sativa Lung]

Politic 8.3
venture 5.8
52mm F4 Lockin
Ceramic Reds
Jessup
Shorty's hex

Can you post a top pic? (I promise I won't mock your grip job)

I just got my first politic both because the graphic is awesome and because I wanted to support Damon from Politic and Library skate shop (bookmark it, especially if you're northeast... hes always got great stuff and hes incredibly cool, answers all my stupid questions and responds quickly). I got it on Friday and was pleasantly surprised that it was a square shape, which I've only ever seen from south central on certain DOA boards. I normally struggle with the SC standard concave mold because the tail is so steep, but for whatever reason its not as much of a problem when its square. Just curious if thats standard for politic or not. Oh, and it had a fade stain top ply, which I've never seen on any SC deck before. Looks great.

I got to skate it a little bit on saturday and it felt awesome. Unfortunately I'm deploying to Texas for the next two weeks to help out with a covid outbreak and I didn't want to risk traveling with a brand new board so I just took an old setup. Looking forward to skating it more when I get back.

[TheLowerBack]

8.5 Real Full SE
151 Thunder lights. Stock top, 88a Indy conical bottoms without washers
54 Loophole V’s
Jessup
Shieldless Reds
Allen

[Big Baby Jesus]

8.5 Real Full SE
151 Thunder lights. Stock top, 88a Indy conical bottoms without washers
54 Loophole V’s
Jessup
Shieldless Reds
Allen

Nice setup. How you liking the Indy bushings on thunders?

[Omars_Dad]

Expand Quote

Politic 8.3
venture 5.8
52mm F4 Lockin
Ceramic Reds
Jessup
Shorty's hex

[close]

Can you post a top pic? (I promise I won't mock your grip job)

I just got my first politic both because the graphic is awesome and because I wanted to support Damon from Politic and Library skate shop (bookmark it, especially if you're northeast... hes always got great stuff and hes incredibly cool, answers all my stupid questions and responds quickly). I got it on Friday and was pleasantly surprised that it was a square shape, which I've only ever seen from south central on certain DOA boards. I normally struggle with the SC standard concave mold because the tail is so steep, but for whatever reason its not as much of a problem when its square. Just curious if thats standard for politic or not. Oh, and it had a fade stain top ply, which I've never seen on any SC deck before. Looks great.

I got to skate it a little bit on saturday and it felt awesome. Unfortunately I'm deploying to Texas for the next two weeks to help out with a covid outbreak and I didn't want to risk traveling with a brand new board so I just took an old setup. Looking forward to skating it more when I get back.

Here ya go, I never really do anything special with grip jobs

[TurdyBird]

Expand Quote

8.5 Real Full SE
151 Thunder lights. Stock top, 88a Indy conical bottoms without washers
54 Loophole V’s
Jessup
Shieldless Reds
Allen

[close]

Nice setup. How you liking the Indy bushings on thunders?

Don't take this the wrong way because I'm completely incompetent at gripping boards:

Does no grip at the ends of your nose and tail no fuck with you?

I one time did the g stripe (correct term?) on the side on accident and that fucked with me. Thought about doing a speed stripe in the middle but I can barely even pull off flat black.

I need to watch a grip video like one would a trick tip video

[TheLowerBack]

Expand Quote

8.5 Real Full SE
151 Thunder lights. Stock top, 88a Indy conical bottoms without washers
54 Loophole V’s
Jessup
Shieldless Reds
Allen

[close]

Nice setup. How you liking the Indy bushings on thunders?

Softer bottoms without a washer is the only way to get Thunders to turn the way I want.

[TheLowerBack]

Expand Quote

Expand Quote

8.5 Real Full SE
151 Thunder lights. Stock top, 88a Indy conical bottoms without washers
54 Loophole V’s
Jessup
Shieldless Reds
Allen

[close]

Nice setup. How you liking the Indy bushings on thunders?

[close]

Don't take this the wrong way because I'm completely incompetent at gripping boards:

Does no grip at the ends of your nose and tail no fuck with you?

I one time did the g stripe (correct term?) on the side on accident and that fucked with me. Thought about doing a speed stripe in the middle but I can barely even pull off flat black.

I need to watch a grip video like one would a trick tip video

It doesn’t affect me at all. Do you mean visually/mentally, or the lack of grip making my feet slip off?
Visually, I prefer it. Plain black grip is boring to me and even the most simple custom job makes it your own.
The contact area is so small that it doesn’t really matter. I’ve got 11.5 feet so more of my foot is on griptape than not. And I set up in the middle of the nose for switch/nollie tricks.
Gripping your board is just a matter of patience and I really enjoy it . I haven’t had anyone setup my board for me in over 20 years. I also worked in the warehouse at Daddies/CCS for over three years. So I’ve probably gripped a few thousand decks.
TLDR:
It’s not that big of a deal

[Kombuch-A-Holic]

New set-up after searching high and low for 8.38's with a 14" WB. Close enough.

My first FA! Crazy square.



FA 8.38 x 31.75" 14.18" Wheel Base.
139 Indys with double speed ring on the inside. Waiting for 144s.
Krux top bushing stock indy bottom.
51mm Spitfire Tablets 101a.
Bones Swiss.
7/8" Phillips Silverados (Lites)
Random black grip I got from buying a baker board. I actually really like it. (Shake Junt?? )

Oh and custom paint job. It was too much green for me. I've got two other green decks right now.

[ScarceOne]

Krooked 8.5
Venture 5.8
Wayward conical 52mm

[Dr Steve Brule]

Have any of you guys rocked Indy 159s on a 8.38? Like Peter Hewitt does. I am interested in skating a board under 8.5 again but don't wanna change trucks

[Ok]

Have any of you guys rocked Indy 159s on a 8.38? Like Peter Hewitt does. I am interested in skating a board under 8.5 again but don't wanna change trucks

159s are real decent, and it totally works. More wheelbite tho. I’ve actually skated 159s on 8.25s, more than once, also works.

[munchbox]

Expand Quote

Have any of you guys rocked Indy 159s on a 8.38? Like Peter Hewitt does. I am interested in skating a board under 8.5 again but don't wanna change trucks

[close]

159s are real decent, and it totally works. More wheelbite tho. I’ve actually skated 159s on 8.25s, more than once, also works.

that thought induced a brief episode of ptsd. the biggest issue with axles wider than deck is having to baby every turn and landing if you ride loose.

[FrozenIndustries]

Expand Quote

Expand Quote

Have any of you guys rocked Indy 159s on a 8.38? Like Peter Hewitt does. I am interested in skating a board under 8.5 again but don't wanna change trucks

[close]

159s are real decent, and it totally works. More wheelbite tho. I’ve actually skated 159s on 8.25s, more than once, also works.

[close]

that thought induced a brief episode of ptsd. the biggest issue with axles wider than deck is having to baby every turn and landing if you ride loose.

Early in quarantine I skated a flat DOA 8.25" with 159s. It was cool for slappys and I learned slappy BS crooks on it. It was just super heavy and looked kind of wild so I went back to 149s and then to Ace 44s.

[TwisT]

about to take this boy out.

The graphic is a test screen print. Hopefully, I figure it out. I have to reassemble my print jig to be more stable. so the board won't wobble and smeer.

8.25
tensor 5.5 magnessium
Satori 101a 53mm
bones swiss

[Ok]

Expand Quote

Expand Quote

Expand Quote

Have any of you guys rocked Indy 159s on a 8.38? Like Peter Hewitt does. I am interested in skating a board under 8.5 again but don't wanna change trucks

[close]

159s are real decent, and it totally works. More wheelbite tho. I’ve actually skated 159s on 8.25s, more than once, also works.

[close]

that thought induced a brief episode of ptsd. the biggest issue with axles wider than deck is having to baby every turn and landing if you ride loose.

[close]

Early in quarantine I skated a flat DOA 8.25" with 159s. It was cool for slappys and I learned slappy BS crooks on it. It was just super heavy and looked kind of wild so I went back to 149s and then to Ace 44s.

Agree with both ya’ll, it’s not my ideal. Basically too heavy, and turns are slower. For straight flip tricks, it worked well for me (kickflips, switch heels, etc), but for any treflips, or rotations....too funky. I can’t skate transition, and I’ve got some type of weird ledge disability, so I’m usually just trying to put in an hour of flat ground, and some cruising. 159s on hills are cool, but after skating for a short time my legs feel like I’ve been in a fight, just all beat up (I’m that dusty). 
44s are such a versatile truck

[Colt Cannon's Cargos]

New everything aside from wheels

Habitat 8.25
First pair of Thunders after riding Indy my whole life, 148 lights
Spitfire F4 52mm
Bones Swiss
Jessup Ultra

[TurdyBird]

It doesn’t affect me at all. Do you mean visually/mentally, or the lack of grip making my feet slip off?
Visually, I prefer it. Plain black grip is boring to me and even the most simple custom job makes it your own.
The contact area is so small that it doesn’t really matter. I’ve got 11.5 feet so more of my foot is on griptape than not. And I set up in the middle of the nose for switch/nollie tricks.
Gripping your board is just a matter of patience and I really enjoy it . I haven’t had anyone setup my board for me in over 20 years. I also worked in the warehouse at Daddies/CCS for over three years. So I’ve probably gripped a few thousand decks.
TLDR:
It’s not that big of a deal

I think it would just be a mental thing for me. Rad set up tho!!!

[fulfillthedream]

about to take this boy out.

The graphic is a test screen print. Hopefully, I figure it out. I have to reassemble my print jig to be more stable. so the board won't wobble and smeer.

8.25
tensor 5.5 magnessium
Satori 101a 53mm
bones swiss

cool setup up and rad graphic- how are the new line up of satori's?

[Gray Imp Sausage Metal]

that real board is fire and I love your griptape job!

[TheLowerBack]

that real board is fire and I love your griptape job!

Thanks dude. Haven’t had a Real in over ten years. Stoked on the shape and dims. .

[TwisT]

Expand Quote

about to take this boy out.

The graphic is a test screen print. Hopefully, I figure it out. I have to reassemble my print jig to be more stable. so the board won't wobble and smeer.

8.25
tensor 5.5 magnessium
Satori 101a 53mm
bones swiss

[close]

cool setup up and rad graphic- how are the new line up of satori's?

I love this shape. Super skinny wheels just look good on a board IMO. I usually ride 83b. These are the first 101s I’ve had in a long time and didn’t hate day one.

[Gray Imp Sausage Metal]

Expand Quote

that real board is fire and I love your griptape job!

[close]

Thanks dude. Haven’t had a Real in over ten years. Stoked on the shape and dims. .

yeah, I can’t even remember the last time a rocked a real but that shape looks reminiscent of all those square FA/ hockey/ wknd boards and I absolutely love loopholes atm

[Sundaynuggets]

Expand Quote

Expand Quote

@WizardOf0dds I’ve ridden basically everything but Indy in my years on and off the board. I was on Ventures most recently. I like Ace and Thunder too depending on the deck. I guess I’m glad to have another option to ride now. And I can’t find a shoe better than the Legacy Slim right now.

@FrozenIndustries I had a great session on the Loopholes yesterday. I put some better bearings in them and I’m gonna keep them on my main board for a while.  I never had the icy feeling mentioned by others, kinda the opposite, but they are in a good place now.

And no Loophole doesn’t make a 53 and now that I think about it I can’t remember what size I bought

[close]

Same, going between those and F4s (99 52mm conical full) the loopholes are WAY grippier. I am totally fine with it given how well they deal with rough ground.

[close]

loopholes are grippy? My conical 56mm make me feel like I’m fucking leo valls reveritng and powersliding all over the shop

Interesting! My Vshapes are pretty grippy, and I had two sets of square shapes, one of which was suuuuper icy for the first day then wore down a bit to be grippier, and the other (which I got used) was slightly grippier than that.

Oddly enough, they all feel the same rolling on different levels of crust, just the slide seems to be inconsistent from set to set.

Might just be a product of them being a smaller company outing smaller batches at a time?

[TumKayo]

Welcome 8.8 Effigy shape
Indy 159s on .1” mini logo shock pads
Orb 56mm Specter 99a
Bones Reds

[maxi-pad]

Expand Quote

Hockey Nik Stain 8.5
Indy 159’s
OJ elite 56mm
Bronson raws
Mob

Setup goooeeeesssssss

[close]

I want that board. Jus for the wall, my girl loves russian.
Looks sick, what's good on ojs? I never had em.

Yooooo my bad, just saw this. This is my second set of elites and I really like em. They skate nearly identical to F4’s imo. This shape (hardline) is really sick, too

[Sluggloaph]

Expand Quote

Expand Quote

Hockey Nik Stain 8.5
Indy 159’s
OJ elite 56mm
Bronson raws
Mob

Setup goooeeeesssssss

[close]

I want that board. Jus for the wall, my girl loves russian.
Looks sick, what's good on ojs? I never had em.

[close]

Yooooo my bad, just saw this. This is my second set of elites and I really like em. They skate nearly identical to F4’s imo. This shape (hardline) is really sick, too

Doap. Thanks for the get back. I'm always lookin for new wheels. Much aprish.

[lovecurbs_brazil]

159 on 8.5 and dont look wider than the board, good looking!

[fredgallSOTY]

ok i really really hope this works im so sorry for any inconveniences.





Hockey Nik Stain 8.5
Independent 139
Spitfire Andrew Allen F4 Conical Full 55mm
Jessup grip
hardware i've had for like 12 years
stickers by my friend (im sorry)

Vans Half Cab pro & Vans TNT SG (size 10.5)

[camel filters]

Untitled by , on Flickr
Passport 8.38
Indy 149 standard
7/8 Indy hardware
52mm f4 Radials
Reds
Jessup

Black Half Cab Classics

[Wizard0f0dds]

Snapped my Hockey 8.5 today, by the time I drove to the shop and back to the park, it started raining so here I am.

Quasi 8.375
Ace 44 (3 washers inside each wheel)
Spitfire F4 54mm 99a
Bones Reds
Bolts
Jessup

Almost set it up with venture 5.8, but then I remembered Ace are where it's at and that I was just gonna be bummed and back on Ace in one or two shitty sessions