Author Topic: The Set-up Thread (Read 5898260 times)

SneakySecrets · « **Reply #20100 on:** March 25, 2019, 10:53:47 AM »

Quote from: BMCsteve on March 25, 2019, 09:13:37 AM

Quote from: Fifty8mm on March 25, 2019, 07:56:28 AM
Expand Quote

D.O.A. white devil 8.25 Flat as Fuck
Thunder team Titaniums 149rs ,stock piss orange bushings, and soft Krux pivot cups
58mm Spits Radials
Black panther ceramics
Thunder bolts
Jessup grip with a stripe in front of the back bolts.
Blazer Viotech and Nike Sb Jordan 1
[close]

Killer. I have the same board but an 8.5 sitting on ice until my current one is done

That’s not good for them. Always store boards in a dry place.

nosneb · « **Reply #20101 on:** March 25, 2019, 01:38:20 PM »

Quote from: nosneb on March 13, 2019, 04:24:08 PM

DOA Upper Darby 8.25 (mellow)
Jessup
Bronze Allen key hardware
Venture Hi 5.8
Spitfire F4 Classics 53mm
Bronson Raw

Just wanted my DOA board next to everyone else DOA post lol

Xen · « **Reply #20102 on:** March 25, 2019, 03:24:11 PM »

Flat as Fuck

Is there anything STEEP as fuck these days

Scumco still deepdishing? I need a squared off deep concave =D

Esmith5488 · « **Reply #20103 on:** March 25, 2019, 03:40:42 PM »

Quote from: Xen on March 25, 2019, 03:24:11 PM

Flat as Fuck

Is there anything STEEP as fuck these days Scumco still deepdishing? I need a squared off deep concave =D

I want to say the ty beall ones are normally deep dish with a square nose but the might have changed

Scottboarding · « **Reply #20104 on:** March 25, 2019, 05:13:49 PM »

Hockey 8.5
Indy 149
Spitfire F4 101a 54mm
Swiss 6-Ball
Mob M-80
Vans Sk8-Hi

Really digging this shape; super fat nose and tail.

landedprimo · « **Reply #20105 on:** March 25, 2019, 05:20:40 PM »

Quote from: Fifty8mm on March 25, 2019, 07:56:28 AM

Cool board. I sort of look like that dude in the graphic, set me back for a minute when I first saw it.

JustSomeDumbassGuyPosting · « **Reply #20106 on:** March 25, 2019, 11:24:35 PM »

917 AO 8.25
Indy 144 aftermarket bushings, hard, barrel.
Conical full F4 54mm
Assorted shit bearings
Blazers

JustSomeDumbassGuyPosting · « **Reply #20107 on:** March 25, 2019, 11:43:32 PM »

Quote from: Scottboarding on March 25, 2019, 05:13:49 PM

Hockey 8.5
Indy 149
Spitfire F4 101a 54mm
Swiss 6-Ball
Mob M-80
Vans Sk8-Hi

Really digging this shape; super fat nose and tail.

Is this the shape that's 31.9 or something long? Or 33?

honey island · « **Reply #20108 on:** March 26, 2019, 02:44:38 AM »

Quote from: JustSomeDumbassGuyPosting on March 25, 2019, 11:43:32 PM

Quote from: Scottboarding on March 25, 2019, 05:13:49 PM
Expand Quote

Hockey 8.5
Indy 149
Spitfire F4 101a 54mm
Swiss 6-Ball
Mob M-80
Vans Sk8-Hi

Really digging this shape; super fat nose and tail.
[close]
Is this the shape that's 31.9 or something long? Or 33?

31.9

the john fitz boards vary from drop to drop going from 33 to 31.9 and back

Scottboarding · « **Reply #20109 on:** March 26, 2019, 07:47:44 AM »

Quote from: honey island on March 26, 2019, 02:44:38 AM

Quote from: JustSomeDumbassGuyPosting on March 25, 2019, 11:43:32 PM
Expand Quote
Quote from: Scottboarding on March 25, 2019, 05:13:49 PM
Expand Quote

Hockey 8.5
Indy 149
Spitfire F4 101a 54mm
Swiss 6-Ball
Mob M-80
Vans Sk8-Hi

Really digging this shape; super fat nose and tail.
[close]
Is this the shape that's 31.9 or something long? Or 33?
[close]

31.9

the john fitz boards vary from drop to drop going from 33 to 31.9 and back

Yes it's the 31.9 shape. I normally ride longer boards, but this one feels totally fine.

Quique · « **Reply #20110 on:** March 26, 2019, 08:32:21 AM »

Set up GT rode last year when he came to my country

Antihero BA 8.5x 32.18
Indy x Supreme 149
F4 Classic 52 99a
Modus
Stratosphere Grip

Don't know if I should skate it or not. Tried it yesterday it felt great.

Painted Baby · « **Reply #20111 on:** March 26, 2019, 11:25:46 AM »

^I guess it would depend on how hard it was to get US brands for reasonable prices in your country. That would remain a conversation piece for me but if I just couldn't get Indys I would maybe have to skate the ones I had on hand, regardless of how I got them.

roba · « **Reply #20112 on:** March 26, 2019, 01:27:36 PM »

Quote from: kike on March 26, 2019, 08:32:21 AM

Set up GT rode last year when he came to my country

Antihero BA 8.5x 32.18
Indy x Supreme 149
F4 Classic 52 99a
Modus
Stratosphere Grip

Don't know if I should skate it or not. Tried it yesterday it felt great.

i'd keep the deck and skate the rest

Idk · « **Reply #20113 on:** March 26, 2019, 05:25:49 PM »

Quote from: kike on March 26, 2019, 08:32:21 AM

Set up GT rode last year when he came to my country

Antihero BA 8.5x 32.18
Indy x Supreme 149
F4 Classic 52 99a
Modus
Stratosphere Grip

Don't know if I should skate it or not. Tried it yesterday it felt great.

Now we know what he rides! 🤗

tangar · « **Reply #20114 on:** March 26, 2019, 06:35:54 PM »

Re-sell the Supreme x Indys and skate the rest. It’s what GT would have wanted.

honey island · « **Reply #20115 on:** March 26, 2019, 07:26:21 PM »

i'd keep the whole complete in the corner of a room. thats a sick piece of memorabilia from one of the goats.

cold budweisers · « **Reply #20116 on:** March 26, 2019, 08:01:33 PM »

heroin 8.25 (i would have preferred a tcm 2 board)
spitfire f4 conical full 54mm
bones swiss
ace 44 w/ stock bushings
slip on pros

Painted Baby · « **Reply #20117 on:** March 26, 2019, 08:13:45 PM »

A TCM2 Breakfast Club graphic would be tight. Are Heroin popsicle shapes the same as other Baker Boys shapes?

landedprimo · « **Reply #20118 on:** March 26, 2019, 08:54:32 PM »

Quote from: cold budweisers on March 26, 2019, 08:01:33 PM

heroin 8.25 (i would have preferred a tcm 2 board)
spitfire f4 conical full 54mm
bones swiss
ace 44 w/ stock bushings
slip on pros

Holy fuck! I want that board. And a TCM 2 board.

CrumblingInfrastructure · « **Reply #20119 on:** March 26, 2019, 09:06:08 PM »

Quote from: cold budweisers on March 26, 2019, 08:01:33 PM

heroin 8.25 (i would have preferred a tcm 2 board)
spitfire f4 conical full 54mm
bones swiss
ace 44 w/ stock bushings
slip on pros

Ambrosia slip ons unite.

144p · « **Reply #20120 on:** March 26, 2019, 10:33:03 PM »

Grant Taylor goes that fast on 52s...

naig · « **Reply #20121 on:** March 27, 2019, 01:13:55 AM »

AH Jalopi/Cardiel 8.4"
Film Raw 5.5"
Bones Swiss
Spitfire F4 Classic 52mm

rob · « **Reply #20122 on:** March 27, 2019, 02:12:59 AM »

Quote from: 144p on March 26, 2019, 10:33:03 PM

Grant Taylor goes that fast on 52s...

Trust me it’s the modus bearings

Best brand of bearings for the price in my experience, I mean in the realm of cheaper than bones Swiss

clintendo · « **Reply #20123 on:** March 27, 2019, 03:56:51 AM »

AH/Yogurt Daan 8.4'
Theeve Tiax 6.5's with riptide pivots & bones medium bushings
F4 99a Conical 53mm
Bronson Raws
Modus Hardware (except the green one)
Mob Grip
Cons Crimsons

Sundaynuggets · « **Reply #20124 on:** March 27, 2019, 05:07:04 AM »

Quote from: Xen on March 25, 2019, 03:24:11 PM

Flat as Fuck

Is there anything STEEP as fuck these days Scumco still deepdishing? I need a squared off deep concave =D

Pennswood and South Central both make some steep concaves. Scumco still uses Pennswoods steep concave on some decks and the ones I’ve seen 8.3 and wider were squared-ish (though I don’t know of any other company using Pennswood that uses that concave) and two decks I got that use South central (Politic and DOA) have steep concaves as well. The DOA I got was square. I’m pretty sure those are the standard mold from SC.

Sorry to derail the thread!

Firebert · « **Reply #20125 on:** March 27, 2019, 06:54:32 AM »

Quote from: clintendo on March 27, 2019, 03:56:51 AM

AH/Yogurt Daan 8.4'
Theeve Tiax 6.5's with riptide pivots & bones medium bushings
F4 99a Conical 53mm
Bronson Raws
Modus Hardware (except the green one)
Mob Grip
Cons Crimsons

Nice grip job and trucks there

cosmicgypsies · « **Reply #20126 on:** March 27, 2019, 07:09:00 AM »

Quote from: Sundaynuggets on March 27, 2019, 05:07:04 AM

Quote from: Xen on March 25, 2019, 03:24:11 PM
Expand Quote
Flat as Fuck

Is there anything STEEP as fuck these days Scumco still deepdishing? I need a squared off deep concave =D
[close]

Pennswood and South Central both make some steep concaves. Scumco still uses Pennswoods steep concave on some decks and the ones I’ve seen 8.3 and wider were squared-ish (though I don’t know of any other company using Pennswood that uses that concave) and two decks I got that use South central (Politic and DOA) have steep concaves as well. The DOA I got was square. I’m pretty sure those are the standard mold from SC.

Sorry to derail the thread!

had a politic last year and can confirm the concave was pretty fuckin steep and i didnt really enjoy it, then later got a national with their "high" concave which was p similar but i enjoyed it. not sure how that worked out but yeah.

SweetDickWilly666 · « **Reply #20127 on:** March 27, 2019, 11:46:33 AM »

Got new spitfire 51mm classics

Girl 8.37” 32.25” wb-14.4”
Venture 5.25 hi with 3 spacers on each wheel. Spitfire cheapshots bearings

TwisT · « **Reply #20128 on:** March 27, 2019, 07:46:42 PM »

Finesse 8.25
Destructo mag
Bones stf v5 53mm
Bones Swiss
Mob grip
Bender Hardware

I'm skating half cab pros and they are fucking great!

mynameisnotjeff · « **Reply #20129 on:** March 28, 2019, 12:50:55 PM »

Quote from: rob on March 27, 2019, 02:12:59 AM

Quote from: 144p on March 26, 2019, 10:33:03 PM
Expand Quote
Grant Taylor goes that fast on 52s...
[close]

Trust me it’s the modus bearings

Best brand of bearings for the price in my experience, I mean in the realm of cheaper than bones Swiss

Yeah but then don't they run on grease. Felt like my set of the ABEC 7s were a little slow but rolled nicely. Wasn't sure if throwing speed cream on them was appropriate once they were due for some maintenance.

Author Topic: The Set-up Thread (Read 5898260 times)

JustSomeDumbassGuyPosting

JustSomeDumbassGuyPosting

SweetDickWilly666

Cookie Preferences