The Set-up Thread

[Jd82]

I'm new to the forum and I just set this board up and figured I would add it to this thread. I was a little concerned about how much the back trucks stick out beyond the deck due to the shape.
What yall think

9.5 black label auby taylor
Ace 66
Slime balls 56mm 99a
1/8" riser

[Fat Tire]

I'm new to the forum and I just set this board up and figured I would add it to this thread. I was a little concerned about how much the back trucks stick out beyond the deck due to the shape.
What yall think

9.5 black label auby taylor
Ace 66
Slime balls 56mm 99a
1/8" riser

It wouldn't bother me too much but it's sick that you broke that deck out! Auby had the best shapes on Black Label

[Surf The Earth]

Dream Complete!!
Dane1
Ace 55
Spit Conical Full 99 56mm
Reds
Jessup (terrible grip job haha)

[funeral_tuxedo]

into the final frontier of the madness. figured since i was comfortable on my dane1 with the 14.125 but didnt like the couch or shred shapes that had sub 14 wheelbases,  14.0 was the obvious answer. @ballintoohard sold me a wall board and shes a fucking stunner




scumco deep dish 8.5/31.5/14.0
venture 5.6 w/gold plates+riptides +flat washers+indy 78a
f4 conical full 52mm 101a
swiss super 6
local allen hardware
mob
sb dunk lows/adidas tyshawns


lets start with the shape. very reminiscent of the hockey 8.5 shape that i love, just shorter and maybe a hair less square. been liking the short board/long leg combo in terms of leveling things out, feels much more natural.

patting myself on the back for sticking with ventures. the tail steepness plus the deck wb, axle to axle, truck height, and weight has equalled the easiest pop ive ever experienced with my own setup. feels like venture lows with extra pop.

gonna take it to the indoor park this weekend to see if the 101a spits can hang or if they bound to being summer wheels. jury is still out on that but wheels are the only thing id even consider tinkering with. corncerned this is my best setup ever, have a hold on another one that im picking up next week. obviously not as good of a graphic

do you feel any difference with riptides?

[SneakySecrets]

^That tail looks super steep... I don’t know if I’d be able to ever get it to actually make contact with the ground if I tried to skate that thing.

[DarthDingusMaximus]

Expand Quote

into the final frontier of the madness. figured since i was comfortable on my dane1 with the 14.125 but didnt like the couch or shred shapes that had sub 14 wheelbases,  14.0 was the obvious answer. @ballintoohard sold me a wall board and shes a fucking stunner




scumco deep dish 8.5/31.5/14.0
venture 5.6 w/gold plates+riptides +flat washers+indy 78a
f4 conical full 52mm 101a
swiss super 6
local allen hardware
mob
sb dunk lows/adidas tyshawns


lets start with the shape. very reminiscent of the hockey 8.5 shape that i love, just shorter and maybe a hair less square. been liking the short board/long leg combo in terms of leveling things out, feels much more natural.

patting myself on the back for sticking with ventures. the tail steepness plus the deck wb, axle to axle, truck height, and weight has equalled the easiest pop ive ever experienced with my own setup. feels like venture lows with extra pop.

gonna take it to the indoor park this weekend to see if the 101a spits can hang or if they bound to being summer wheels. jury is still out on that but wheels are the only thing id even consider tinkering with. corncerned this is my best setup ever, have a hold on another one that im picking up next week. obviously not as good of a graphic

[close]

do you feel any difference with riptides?

I like this setup however that grip job is a bit too wide for that line. But that’s just me though.

[sometimeperhaps]

Maybe not the best thread for questions, but there seems to be a lot of discussion around sizes.

Haven't skated in awhile because of a bad back, and my last setup is pretty random. Basically an old board from my brother, some trucks and wheels from my late friend. Keeping the trucks for sentimental reasons. Trucks are Independent 139's I think, meaning I can ride 7.8 - 8.2. I'd want to go as wide as I can, since I'd mostly be cruising, flatground and ledges, but I'm also 31 so maybe it's time for transition.

Reading through a couple of threads,I've seen people talk about wheelbase a bunch, sometimes in correlation to height. I'm about 6'4'' with pretty long legs. Should I be after a certain wheelbase? I thought I saw someone say shorter would be better.

Would something like 8.125" Wide X 32" Long X 14.25" Wheelbase work?



Baker TK Shalom 8"
Independent 139
Skate Mental wheels

[jay_nev]

@sometimeperhaps  welcome back, enjoy
https://www.slapmagazine.com/index.php?topic=109009.0

Tall pals thread probably be good to read through. I’m about the same height. Since you said as wide as you can go, I’d say 9” trucks for stability and cruising but 8.75” if you wanted to pop a bit more/get less tired doing so.

[sometimeperhaps]

@sometimeperhaps  welcome back, enjoy
https://www.slapmagazine.com/index.php?topic=109009.0

Tall pals thread probably be good to read through. I’m about the same height. Since you said as wide as you can go, I’d say 9” trucks for stability and cruising but 8.75” if you wanted to pop a bit more/get less tired doing so.

Thanks pal, I think that was the thread I was after.

[FatGuy92]

Trying something different. First session in and already wearing through the tail pretty quick.

Dane 1
Thunder 151
1/8 risers
F4 54mm classics
Bronson g3

[munchbox]

mentions cause my formattings kinda dusty

@hobochimp - forged plates from the titanium model.

@Sundaynuggets - the hockey 8.5 is similarly shaped and has about the same tail angle. hockey has a slightly steeper, squarer nose and medium concave.

@funeral_tuxedo - yes riptides are the truth. its one of those things that you just have to try to really get it. noticeable difference coming off the stock pivot cups

@SneakySecrets - feels effortless for me, naturally pop at the end of the tail. i just have to jump and it sticks to my feet. actually need to adjust for over popping some flip tricks but thats a "problem" i want

@El Fapinator - narrow fellas just dont get it

[Sundaynuggets]

mentions cause my formattings kinda dusty

@hobochimp - forged plates from the titanium model.

@Sundaynuggets - the hockey 8.5 is similarly shaped and has about the same tail angle. hockey has a slightly steeper, squarer nose and medium concave.

@funeral_tuxedo - yes riptides are the truth. its one of those things that you just have to try to really get it. noticeable difference coming off the stock pivot cups

@SneakySecrets - feels effortless for me, naturally pop at the end of the tail. i just have to jump and it sticks to my feet. actually need to adjust for over popping some flip tricks but thats a "problem" i want

@El Fapinator - narrow fellas just dont get it

Interesting! I need to try this shape. I have a deep dish square shaped deck, I imagine it feels similar.

[Fhk]

mentions cause my formattings kinda dusty

@hobochimp - forged plates from the titanium model.

@Sundaynuggets - the hockey 8.5 is similarly shaped and has about the same tail angle. hockey has a slightly steeper, squarer nose and medium concave.

@funeral_tuxedo - yes riptides are the truth. its one of those things that you just have to try to really get it. noticeable difference coming off the stock pivot cups

@SneakySecrets - feels effortless for me, naturally pop at the end of the tail. i just have to jump and it sticks to my feet. actually need to adjust for over popping some flip tricks but thats a "problem" i want

@El Fapinator - narrow fellas just dont get it

Shit..I didn't get my questions in on time. Have you skated 5.6s on a Hockey 8.5? If so how was it, I don't have any 8.5 trucks and I have a FA 8.5 coming.

[cky enthusiast]

Expand Quote

Expand Quote

viceland promo 8.5 (made by watson, so sayeth the man who flowed me)

indy 159’s

ricta 55mm 99a (cheaper than the usual- i’m insanely broke. i hate their graphics, entire team and all their ads)

bones reds

[close]

I'm digging the colors on the deck!

Indy Mids?

Those Rictas have a nice shape to em though! Hope they treat ya well!

[close]

I looked closer, yes mids, with 55mm wheels. 

Interesting to hear if you get wheelbite with that combo.

4 hour sesh today at the DIY, wheels def kiss the deck but i never ground out/slammed from wheelbite

this jawn is definitely well made. a lot of pop.

[munchbox]

Expand Quote

mentions cause my formattings kinda dusty

@hobochimp - forged plates from the titanium model.

@Sundaynuggets - the hockey 8.5 is similarly shaped and has about the same tail angle. hockey has a slightly steeper, squarer nose and medium concave.

@funeral_tuxedo - yes riptides are the truth. its one of those things that you just have to try to really get it. noticeable difference coming off the stock pivot cups

@SneakySecrets - feels effortless for me, naturally pop at the end of the tail. i just have to jump and it sticks to my feet. actually need to adjust for over popping some flip tricks but thats a "problem" i want

@El Fapinator - narrow fellas just dont get it

[close]

Shit..I didn't get my questions in on time. Have you skated 5.6s on a Hockey 8.5? If so how was it, I don't have any 8.5 trucks and I have a FA 8.5 coming.

5.6s on a hockey 8.5 is what made me a magic carpet believer, cant have it any other way at this point. more turning before wheelbite, ride away from more tricks, better flip response, primos arent as bad, and it just looks right to me. if i was good enough, id run 5.2s similar to the 8.5/139 that reynolds/baker loved to take full advantage. future challenge for sure

try running two inside washers before you consider getting 5.8s, you might like it!

[Mbrimson88]

I'm new to the forum and I just set this board up and figured I would add it to this thread. I was a little concerned about how much the back trucks stick out beyond the deck due to the shape.
What yall think

9.5 black label auby taylor
Ace 66
Slime balls 56mm 99a
1/8" riser

Still have a few of those decks floating round - lots of fun!

There is also a Big Boards 9+ thread here too

https://www.slapmagazine.com/index.php?topic=97297.2940;topicseen


Also forgot to say with all those 80s fish shapes there is always a huge amount of truck showing at the back, if you want the trucks the right size for the decks, so that is just how they look.  The widest point is 9.5 but the front truck area is about 9 and the back truck area is about 8.5, but you could never ride 44s / 149s on it.  The 55s would work well enough though.

[Fhk]

Expand Quote

Expand Quote

mentions cause my formattings kinda dusty

@hobochimp - forged plates from the titanium model.

@Sundaynuggets - the hockey 8.5 is similarly shaped and has about the same tail angle. hockey has a slightly steeper, squarer nose and medium concave.

@funeral_tuxedo - yes riptides are the truth. its one of those things that you just have to try to really get it. noticeable difference coming off the stock pivot cups

@SneakySecrets - feels effortless for me, naturally pop at the end of the tail. i just have to jump and it sticks to my feet. actually need to adjust for over popping some flip tricks but thats a "problem" i want

@El Fapinator - narrow fellas just dont get it

[close]

Shit..I didn't get my questions in on time. Have you skated 5.6s on a Hockey 8.5? If so how was it, I don't have any 8.5 trucks and I have a FA 8.5 coming.

[close]

5.6s on a hockey 8.5 is what made me a magic carpet believer, cant have it any other way at this point. more turning before wheelbite, ride away from more tricks, better flip response, primos arent as bad, and it just looks right to me. if i was good enough, id run 5.2s similar to the 8.5/139 that reynolds/baker loved to take full advantage. future challenge for sure

try running two inside washers before you consider getting 5.8s, you might like it!

Thanks bub! I have had 5.6s on a pretty steep/short wb  8.38 and absolutely loved it, so I was hoping a FA in a kinda similar size might feel somewhat similar. I appreciate you kicking the K-nowledge as always.

[DarthDingusMaximus]

mentions cause my formattings kinda dusty

@hobochimp - forged plates from the titanium model.

@Sundaynuggets - the hockey 8.5 is similarly shaped and has about the same tail angle. hockey has a slightly steeper, squarer nose and medium concave.

@funeral_tuxedo - yes riptides are the truth. its one of those things that you just have to try to really get it. noticeable difference coming off the stock pivot cups

@SneakySecrets - feels effortless for me, naturally pop at the end of the tail. i just have to jump and it sticks to my feet. actually need to adjust for over popping some flip tricks but thats a "problem" i want

@El Fapinator - narrow fellas just dont get it

Naww son I like a narrow thin line too much and it’s off putting.

[munchbox]

the wider the stripe the wider the pipe

[ScarceOne]

Paterson 8.25
Venture 5.8
Spitfire 53 f4

[BelknappBruiser]

8.375 Quasi Acid-Ply
5.8 Venture Bobby Worrest
52mm Spitfire Mike Anderson SFW 2
Bones Reds
1" Shorty's Silverados
Black Magic

Huf Soto 10.5 (Not Pictured)

[somedudefromnj]

8.375 Quasi Acid-Ply
5.8 Venture Bobby Worrest
52mm Spitfire Mike Anderson SFW 2
Bones Reds
1" Shorty's Silverados
Black Magic

Huf Soto 10.5 (Not Pictured)

im envious. Been wanting this board, but refuse to buy a deck until i get through this stack

[Jd82]

Thanks for your input.
I tried some  bones slims on the auby taylor with the ace 66 and indy 169. Either truck is great but I'm leading more towards the ace over the indys.
I like the feel of the ace. Maybe its all in my head

[Jd82]

I posted a pic of my setups in the 9" plus thread

[RichardBarkley]

I posted a pic of my setups in the 9" plus thread

Ctrl + c, ctrl + v

[RichardBarkley]

Expand Quote

8.375 Quasi Acid-Ply
5.8 Venture Bobby Worrest
52mm Spitfire Mike Anderson SFW 2
Bones Reds
1" Shorty's Silverados
Black Magic

Huf Soto 10.5 (Not Pictured)

[close]

im envious. Been wanting this board, but refuse to buy a deck until i get through this stack

What's the end on that puppy. Haven't popped my quasi cherry yet. Might get one for my next deck

[shpongle]

blood wizard 8.75 with some 4 year old drawings
indy 159mm
spidfire 56mm classic down to 54

[RichardBarkley]

blood wizard 8.75 with some 4 year old drawings
indy 159mm
spidfire 56mm classic down to 54

Fair play to your kid

The crayon looks really good on the grip.

Never thought I'd say that

[gaunting]

blood wizard 8.75 with some 4 year old drawings
indy 159mm
spidfire 56mm classic down to 54

looks so sick.

[Fhk]

blood wizard 8.75 with some 4 year old drawings
indy 159mm
spidfire 56mm classic down to 54

Looks good! And be very thankful it's crayon and not sidewalk chaulk..I know from experience