Author Topic: DIY boards/graphics (Read 168283 times)

Joust Ostrich · « **Reply #150 on:** September 17, 2011, 08:39:07 AM »

Quote from: sweatercuff on September 17, 2011, 04:07:48 AM

Quote from: Joust Ostrich on September 12, 2011, 03:41:41 PM
Expand Quote
Quote from: sweatercuff on September 11, 2011, 10:02:18 PM
Expand Quote
my beer wall (I've been collecting the side panels of premium and small batch beers for the past 4 years, and use them as a boarder on the walls in my living room and kitchen cause I like the art on them.)
[close]
Can you post a pic of that? Do you mean from a six pack box or what? Sounds like a cool idea i'll never do, but would like to see what it looks like. Thanks.
[close]
Sure, but its gonna be a doozy. i just counted with one of those click counters, and I have 143 up on my walls currently, and 15 more sitting on top of the refrigerator cause I ran out of ceiling boarder space in my apartment.
Heres the ones in my kitchen (use right click/control click and hit view image so you can see the whole thing easier than on this post)

and heres the living room (again, view image. thing is fucking long.)

And heres the board I'm working on! im gonna distress the white paint on the board in a little bit, and then use these T-shirt Iron on print-outs of my old buddy CN (who's an occasional Slap'ite) centered up. I'm thinking then after that, I'm going to do some details along the boarder, and it should be a done deal. I decided I'd organize all the supplies I'm using to make it in a more appealing way.
Vyvance/adderall, after smoking a fair amount earlier in the day, is an AMAZING thing for my productivity.

Update: The transfers didn't work this time around. I've gotten them to work in the past, but I think this time around I was either using too much heat, or not enough, or not for long enough.
anyways, it still looks like a cool textural thing on the deck. Time to re-tool this one.

Thanks.

idealhandmades · « **Reply #151 on:** September 20, 2011, 01:49:56 AM »

in the works. still much to be done.

and a cat mouse pad i found outside.

idealhandmades · « **Reply #152 on:** September 22, 2011, 03:16:46 AM »

MrMello · « **Reply #153 on:** September 22, 2011, 08:40:55 PM »

Really quickly done with acrylics.

crackrazor · « **Reply #154 on:** September 23, 2011, 02:42:06 PM »

/\ That's sick. I have that knife.

I came up a with a few T shirt ideas and had them printed by my buddy.

idealhandmades · « **Reply #155 on:** September 28, 2011, 03:33:50 AM »

lil' update on that suspenders board
I think I'm finally done adding stuff to it. It's gonna look sweet when the trucks get set up over his face and legs.

and also, I made this mask

pica · « **Reply #156 on:** September 28, 2011, 03:36:31 AM »

^is the mask inspired by sido?

Hercules Rockefeller · « **Reply #157 on:** September 28, 2011, 03:38:05 AM »

ahaha, this is amazing.

pica, have a look at the "post a picture of yourself"-thread.

Tony · « **Reply #158 on:** October 02, 2011, 10:57:07 AM »

Hey Sweatercuff,
Is this one of yours?
It was on the Berrics, in the Let It Roll feature.

idealhandmades · « **Reply #159 on:** October 04, 2011, 05:13:38 PM »

Quote from: Tony on October 02, 2011, 10:57:07 AM

Hey Sweatercuff,
Is this one of yours?
It was on the Berrics, in the Let It Roll feature.

yup, thats mah Cabinet.
Kinda bummed I didn't have 2 new boards in there to show off, but they caught me by surprise.
I didn't even know we were getting a feature on their site. Still cool though.

Tony · « **Reply #160 on:** October 05, 2011, 10:30:22 AM »

Quote from: sweatercuff on October 04, 2011, 05:13:38 PM

yup, thats mah Cabinet.
Kinda bummed I didn't have 2 new boards in there to show off, but they caught me by surprise.
I didn't even know we were getting a feature on their site. Still cool though.

Still so rad! Your art is really sick.

idealhandmades · « **Reply #161 on:** October 10, 2011, 01:01:46 PM »

psyched with how this print came out after my printer "jammed". I'm using that goat for a board graphic right now, but I think I might frame this and hang it somewhere.

Made this piece from an old picture of my girlfriend. It was my first attempt at using a dremel, and threading all that string at the bottom of the scarf was a pain in the ass. But I'm happy with the piece.

and heres a little pre-view at my next two boards.

idealhandmades · « **Reply #162 on:** November 07, 2011, 10:33:30 AM »

Finished up this goat cruiser. decided to keep the overall design pretty simple.

and made this one
the cabinet drawing is actually carved into the board with a dremel and then colored red.

Justis · « **Reply #163 on:** November 11, 2011, 12:05:49 PM »

Yo sweatercuff, i wanna get a cruiser from you for christmas. anyway i can buy one?

idealhandmades · « **Reply #164 on:** November 11, 2011, 06:09:25 PM »

Quote from: Justis on November 11, 2011, 12:05:49 PM

Yo sweatercuff, i wanna get a cruiser from you for christmas. anyway i can buy one?

I'm currently exploring options for selling my stuff online, but I'm not ready to do that just yet, cause im having enough trouble keeping the cabinet at the shop stocked, nevermind having enough to merit setting up an online store to sell the excess creations.

I mean, i guess we could kick it old school and you could just mail me a check and i could mail you a board, 1 on 1, mano e mano, pen to paper, stamp to letter, check to bank, board to box, truck to your front door.
Lemme know if you see one that I post on here that you want, and maybe we can working something out.

Justis · « **Reply #165 on:** November 12, 2011, 07:37:44 PM »

Quote from: sweatercuff on November 11, 2011, 06:09:25 PM

Quote from: Justis on November 11, 2011, 12:05:49 PM
Expand Quote
Yo sweatercuff, i wanna get a cruiser from you for christmas. anyway i can buy one?
[close]

I'm currently exploring options for selling my stuff online, but I'm not ready to do that just yet, cause im having enough trouble keeping the cabinet at the shop stocked, nevermind having enough to merit setting up an online store to sell the excess creations.

I mean, i guess we could kick it old school and you could just mail me a check and i could mail you a board, 1 on 1, mano e mano, pen to paper, stamp to letter, check to bank, board to box, truck to your front door.
Lemme know if you see one that I post on here that you want, and maybe we can working something out.

okay sounds sick ill try to just get some cash for christmas then.

JamesNtheGntPch · « **Reply #166 on:** December 27, 2011, 03:32:35 PM »

This is my new cruiser. I shaped it from an old deck and now it's good as new.

idealhandmades · « **Reply #167 on:** December 28, 2011, 10:01:46 AM »

^ Hell yeah James! I almost replied you in the cruiser thread to post this up in here (cause i figured everybody forgot about this topic and it was burried in the boards)
that came out super good.
I wanna see more!

JamesNtheGntPch · « **Reply #168 on:** December 28, 2011, 04:14:06 PM »

Thanks

I made this guy last summer.

JUSTICE BEAVER · « **Reply #169 on:** December 28, 2011, 06:10:29 PM »

Quote from: JamesNtheGntPch on December 28, 2011, 04:14:06 PM

Thanks

I made this guy last summer.

So good!

Sweatercuff also blows my mind! If you make it possible to buy over the interwebs, i would love to buy one.

idealhandmades · « **Reply #170 on:** December 28, 2011, 06:51:30 PM »

Quote from: JUSTICE BEAVER on December 28, 2011, 06:10:29 PM

Quote from: JamesNtheGntPch on December 28, 2011, 04:14:06 PM
Expand Quote
Thanks

I made this guy last summer.

[close]

So good!

I fully agree! thats a real work of useable art.
whenever I visit my friend back in New Hampshire, we always hit the rough new england streets with little mini cruisers like that, and damn, if one of us had that lil guy, they'd surely be promoted to leader of the pack.

Quote from: JUSTICE BEAVER on December 28, 2011, 06:10:29 PM

Sweatercuff also blows my mind! If you make it possible to buy over the interwebs, i would love to buy one.

Thanks for the kind words man!
as for the internet purchasing goes...
still working on that, and it doesn't look like I'll hit my goal of having some kind of online shop for the new year.
It's really, really hard to build up stock and stay motivated and inspired to make things when you're selling them but not turning any kind of real profit also. The one-of-a-kind market is brutal.
thank god I have a day job.

JamesNtheGntPch · « **Reply #171 on:** December 28, 2011, 10:16:04 PM »

Haha thanks, it's a tricky board to handle. There's hardly room for both of my feet and it's a little slippery without grip, but it's really fun to ride on a nice day.

JamesNtheGntPch · « **Reply #172 on:** December 29, 2011, 07:44:22 PM »

I thought this was a nice video to watch. I liked seeing him painting. He has a steady hand.

JamesNtheGntPch · « **Reply #173 on:** January 08, 2012, 06:55:59 PM »

I cut another old board tonight. This one is for my friend who goes to art school, so he wants to paint it once I drop it off to him. I'm curious to see what he paints. I'll post a picture once he finishes.

As far as the cut, I gave this one with a rounder nose and a slight dovetail to experiment with the shapes I can make.

vagabond · « **Reply #174 on:** January 12, 2012, 12:57:28 AM »

Some mean boards and graphics here!
Time to make my own cruiser board - just found two tutorials for that:
http://bennys.tv/en/mixed-skateboard-tips/128-recycled-cruiser-deck
http://bennys.tv/en/skateboard-hardware-tips/121-spray-painting-decks

Will post pictures soon!

JamesNtheGntPch · « **Reply #175 on:** January 14, 2012, 11:03:24 AM »

Quote from: vagabond on January 12, 2012, 12:57:28 AM

Some mean boards and graphics here!
Time to make my own cruiser board - just found two tutorials for that:
http://bennys.tv/en/mixed-skateboard-tips/128-recycled-cruiser-deck
http://bennys.tv/en/skateboard-hardware-tips/121-spray-painting-decks

Will post pictures soon!

If you want really crisp stencil work use Elmers spray adhesive to stick the paper stencil to the board. It will prevent under-spray. Also, mask the rest of your board with paper, so you don't get spray paint where you don't want it (like the guy in the tutorial).

idealhandmades · « **Reply #176 on:** February 20, 2012, 03:01:12 PM »

Latest Rug Roller made for sir Karl Watson. Pretty happy with the way it turned out. It's got wheel wells, and the red and purple are mixed with just a hint of bronze/gold paint, to give it a little illuminated effect.

and this is what I did with the Walker Ryan board he mailed me, which I plan to skate.

Only took maybe 45 minutes total. The "AYO" was a happy accident I noticed after sanding.

chillout · « **Reply #177 on:** February 20, 2012, 03:05:13 PM »

Quote from: sweatercuff on February 20, 2012, 03:01:12 PM

Latest Rug Roller made for sir Karl Watson. Pretty happy with the way it turned out. It's got wheel wells, and the red and purple are mixed with just a hint of bronze/gold paint, to give it a little illuminated effect. Only thing left to do is pick a pattern or something for the carpet gripping.

this is so sick!

friendly dave · « **Reply #178 on:** February 20, 2012, 03:48:13 PM »

Did Karl send you a blank Kayo laminent that you cut down for that carpet cruiser, or is that one of your own?

idealhandmades · « **Reply #179 on:** February 20, 2012, 03:57:28 PM »

Quote from: friendly dave on February 20, 2012, 03:48:13 PM

Did Karl send you a blank Kayo laminent that you cut down for that carpet cruiser, or is that one of your own?

One of my own. I get my boards from the dude that owns the shop out here in Las Vegas, Let It Roll/ and then if I'm making a cruiser or mini shape, cut it out and shape it with my trusty jigsaw and electric sander.

its the same wood as they use for their shop boards, but he refuses to tell anyone what company that is.
He's told us all that it's pretty awesome that we've been given the opportunity to get our boards pressed from them, because they don't normally do it for shops, and that the specific shape is from a certain pro model that we'd all be psyched on.
I was pretty sure for a while that it was Crailtap, but everytime I've brought that up, he's shaken his head "no"

At this point, its kind of a fun guessing game to play when you're just lurking up the place.

Author Topic: DIY boards/graphics (Read 168283 times)

Cookie Preferences